Product listing: Standard Semi Automatic 17.5" Electric Paper Cutter (PC-450) to Spinnit FMMH 3.1 Auto Hydraulic 3-Spindle Paper Drill (FMMH-31)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Standard Semi Automatic 17.5" Electric Paper Cutter (PC-450) - $7350

    • Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
    • Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
    • Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
    • Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.
    • Cutting Witdh: 17.5"
    Part #: PC-450

    $7350.00

  2. Royal Sovereign Sigmont 65H 61" Heat Assist Roll Laminator (SIGMONT-65H) - $7334.75

    • High Grade Silicone Rollers for Consistent Lamination.
    • Rear Slitters for Inline Print Separation.
    • Front Facing Roller Nip Adjustment Crank.
    • Maximum Lamination Speed of 49 ft/min.
    • Foot Pedal and Rear Remote Included.
    Part #: SIGMONT-65H

    $7334.75

  3. MBM 1800S Automatic Programmable Air Feed Tabletop Paper Folder (FO0623) - $7309

    • Ultrasonic double feed sensor. Detects double feeds on any white, printed, transparent, black or mixture of colored sheets
    • Has removable folding roller for easy maintenance, adjustable folding roller pressure, and a spring loaded feed angle adjustment dial
    • Top cover opens and closes in two easy steps and the operator can now reach the air adjustment knob without disruption when the top cover is open.
    • New "Silver Top" metal sheet for smoother paper run and better electric conductivity.
    • Top feed, adjustable air suction feed system, suitable for digitally printed and coated stocks.
    Part #: FO0623

    $7309.00

  4. Royal Sovereign 65" Wide Format Cold Roll Laminator (RSC-1651LS) - $7300

    • Easy to Use. Digital controls for speed, and includes a rear remote control and foot pedal for hands-free operation
    • Fast Adjustments. Quick Notch system for gap adjustment and auto-grip hubs allow quick and easy replacement of roll films
    • 1" Nip. Permits laminating and mounting on substrates up to 1" thick
    • Laminating Speed: 16.4' per Minute
    • Max Film Thickness: 10 mil
    Part #: RSC-1651LS

    $7300.00

  5. Tamerica TCC1200 Wide Format 45" Hot and Cold Roll Laminator (TP-TCC1200) - $7299

    • Take up bar for cold lamination.
    • Tension adjustment.
    • Silicon rollers for enhanced laminating.
    • Vacuumed table for smooth feeding.
    • 1-side & 2-side lamination.
    Part #: TP-TCC1200

    $7299.00

  6. Tamerica 45" Hot and Cold Laminator (TCC-1200HC) - $7289

    • Laminates from 1.5 – 10 mil up to 13 fpm
    • 45” Laminating Width
    • Mounts up to 1/2”
    • 2 programmable temperature settings
    • Take up bar for cold lamination
    Part #: TCC-1200HC

    $7289.00

  7. Spinnit 2-Spindle Hydraulic Lift Paper Drill (FMMH-2.1C) - $7224.66

    • Designed specifically for Casino’s to cancel decks of cards.
    • Has a fixed drawer system which allows easy drilling of six decks of cards at one time.
    • Two spindles with a 2-1/2" drilling capacity
    • Powerful hydraulic lift with foot pedal activation
    • Sturdy adjustable back-gauge
    Part #: FMMH-2.1C

    $7224.66

  8. SEAL 54 EL-1 54" Wide Format Cold Roll Laminator (SEAL-54EL1) - $7197.06

    • Cold roll laminator confidently finishes a variety of applications.
    • Laminates graphics up to 54" wide.
    • Capable of laminating at speeds up to 14 feet/minute.
    • Manual nip adjustment up to 1" for handling of most substrates.
    • Durable uniframe construction requires no assembly and minimal maintenance.
    Part #: SEAL-54EL1

    $7197.06

  9. Formax Single-Head Crash Tabber (FD 262) - $7095

    • Tabs up to 12,000 pieces per hour.
    • Handles media up to 17" wide.
    • Designed to handle a variety of tab stock including translucent and paper.
    • 5-digit resettable counter.
    • Integrated bottom feed for continuous operation.
    Part #: FD 262

    $7095.00

  10. Phoenix 44" Wide Format Hot and Cold Roll Laminator (4400-DHP) - $7095

    • Production:
    • 8 feer per minute.
    • 4.5" heated silicone coated rollers.
    • PSA liner rewind.
    • Sleep mode and auto shut-off.
    Part #: 4400-DHP

    $7095.00

  11. Count iCrease Pro+ Plus Digital Creasing Machine (iCreasePro+) - $7083

    • Simple one-step hand-feed operation means anyone can use it.
    • Can crease and perforate in one pass - no need to manually refeed the paper into the machine after creasing.
    • Two-sided die creasing rod accommodates shallow or deep crease for different stock - simply remove and flip over to change.
    • Comes with pre-set crease locations for 11 different folds; plus 12 custom options to accommodate almost any fold.
    • Crease up to 12 locations and 4 perforations per page.
    Part #: iCreasePro+

    $7083.00

  12. Drytac 35" x 47" Hot Press Heated Glass Top Vacuum Press (HGP260) - $7078.87

    • Glass top allows most applications to remain visible even when the press is closed.
    • State-of-the-art heating system that ensures fast, even heating.
    • Programmable vacuum cycle for consistent results.
    • Adjustable pressure control.
    • Dedicated vacuum pump.
    Part #: HGP260

    $7078.87

  13. Akiles VersaMac Plus Interchangeable Die Binding Punch and Stacker (AKVERSAMAC+) - $7000

    • Heavy Duty Punch Motor: Punches over 500 sheets per min with 70 punch cycles per minute.
    • Interchangeable Die Sets: Quickly change punch patterns by sliding any of the 14 available die sets in and out. No tools needed.
    • Extra Large Paper Stacker: Holds up to 1500 sheets or 3 reams of 20 lb paper and includes a built-in jogger.
    • 3 Year Warranty: The VersaMac Plus is covered by our industry leading 3 year warranty and loaner program.
    • Side Margin Control: Positions your paper for a well-centered punch.
    Part #: AKVERSAMAC+

    $7000.00

  14. D&K Group &K Expression 42 Plus Laminator (EXP42+) - $6995

    • Easy to Use
    • Mounter, Laminator, Encapsulator (prints up to 41" wide.)
    • Fast set-up and easy operation
    • Roller lift for easy film loading
    • In-line slitter for trimming during lamination (optional)
    Part #: EXP42+

    $6995.00

  15. Spiel Sterling Looper Semi-Automatic Twin-Loop Wire Binding Machine (SPL-LP) - $6950

    • A table top, semi-automatic double loop wire binder that can attain the speeds of more costly, floor model wire binding machines.
    • Place a card of cut lengths of wire into the feed tray and it will automatically feed one piece of wire at a time on to the pins for hanging.
    • Hang the book on the wire, then move the book to the closing station to close the wire.
    • 3:1 books can be bound with automatic feeding from the cards of wire.
    • 2:1 books may be bound manually by placing the cut length of wire on the pins.
    Part #: SPL-LP

    $6950.00

  16. Formax AutoSeal FD-2006 Mid-Volume Pressure Sealer (FD2006) - $6895

    • Color Touchscreen Control Panel: Graphics-based and designed for easy, walk-up use.
    • Drop-In Feed System: A drop-in three roller feed system produces dependable feeding of forms with no paper fanning required.
    • Hopper Capacity: Up to 250 forms.
    • Fold Plates: Easy to adjust and fine tune.
    • Paper Jog Control: Allows operators to jog forms through before operation.
    Part #: FD2006

    $6895.00

  17. GBC Discovery 80 High Speed 31" Laminator (1711710) - $6877.51

    • Memory function convenienty saves and recalls up to nine different set-up positions for speed and temperature.
    • Swing away heat shoes allow for safe and easy cleaning. Teflon coating reduces film scratching.
    • Variable film speed control from one to twenty feet per minute.
    • Handles rolls up to 2000 feet for continuous operation
    • Standard 2-1/4" core easily adapts for 1" and 3" core film
    Part #: 1711710

    $6877.51

  18. Royal Sovereign Sigmont 55H 55" Heat Assist Roll Laminator (SIGMONT-55H) - $6669.75

    • High Grade Silicone Rollers for Consistent Lamination.
    • Rear Slitters for Inline Print Separation.
    • Front Facing Roller Nip Adjustment Crank.
    • Maximum Lamination Speed of 49 ft/min.
    • Foot Pedal and Rear Remote Included.
    Part #: SIGMONT-55H

    $6669.75

  19. Rhin-O-Tuff Mega Duty Electric Coil Binding System (7700C4) - $6666.75

    • Coil Die with easy disengageable pins - Included
    • Electric Coil Inserter and Crimpers - Included
    • Attachment kit for mounting Coil Inserter on top of punch - Included
    • Automatic and Manual Reverse feature to reduce jamming in the punch
    • Rate of 25 cycles per minute
    Part #: 7700C4

    $6666.75

  20. SealerSales Low Profile Entry-Level Pallet Stretch Wrapper (SPW-981LP) - $6598.33

    • Can be loaded by forklift or pallet. Includes extra long ramp for use with electric pallet jacks.
    • Mechanical break stretch @ 100%.
    • 3,000lb load capacity.
    • Soft start, fixed speed turntable at 10RPM.
    • Can accommodate pallet loads up to 85" high.
    Part #: SPW-981LP

    $6598.33

  21. Graphtec 54" Roll-Fed Vinyl Cutter and Plotter with Stand and Basket (FC9000-140) - $6586.67

    • Applications:
    • Stickers / Decals
    • Window Signage
    • Highway Signage
    • Heat Transfer Apparel
    Part #: FC9000-140

    $6586.67

  22. MBM FC 10 Automatic 10-Bin Friction Collator (CO0750) - $6569

    • Collates variety of paper stocks and weights at speeds up to 3,600 sets per hour
    • 275 sheet bin capacity
    • Touch-button control panel with LED 4 digit counter simplifies set-up and operation
    • Programming modes include preset batch, insertion, and an alternate bin mode for continuous production
    • Adjustable stacking table for straight or criss-cross stacking
    Part #: CO0750

    $6569.00

  23. Rhin-O-Tuff Heavy Duty Binding Punch with PAL-14 (HD7700P) - $6536.75

    • 14" ( 356mm ) open ended extra capacity die: Punch up to 55 sheets of 11 inch, 20 lb or 80gsm bond paper.
    • U-View waste tray: Holds up to 150% more waste than any other table top punch & eliminates troublesome overfills.
    • The Accu-Set Paper Stop: Set-up all hole placements easily & accurately, even on odd sized paper.
    • Diagnostic Display Lights: Give indications of important machine conditions.
    • Built in Automatic and Manual Reverse: Providing extra insurance to eliminate costly down time & expensive service calls due to overload jams.
    Part #: HD7700P

    $6536.75

  24. GFP 363TH 63" Top Heat Wide Format Roll Laminator (363-TH) - $6420

    • Adds top heat for better overlamination, mounting, and board pre-coating
    • Easy set-up and low maintenance with a top heat boost.
    • Labor saving 3" Aluminum Quick-Grip film shafts.
    • Integrated rear rewind for roll-to-roll apps.
    • Swing-up feed table and 38" output height.
    Part #: 363-TH

    $6420.00

  25. Spinnit Hydraulic Three Spindle Paper Drill (FMMH-3) - $6404.75

    • 2" drilling capacity
    • Powerful hydraulic lift with foot pedal activation
    • Easy to adjust moveable head design
    • Adjustable hydraulic lift speed
    • Built for ease in operation and maximum production performance
    Part #: FMMH-3

    $6404.75

  26. Tamerica 19.29" Programmable Paper Stack Cutter (TPI-4900E) - $6399

    • Programmability: 100 programs x 96 settings.
    • Micro Glide Back Gauge.
    • 5" Touch Screen.
    • Back Gauge Control Knob.
    • Optical Cut Line.
    Part #: TPI-4900E

    $6399.00

  27. Formax Square IT Booklet Finisher (SquareIT) - $6394

    • Creates a square back on pre-stapled booklets.
    • Compact, rugged unit in a small footprint.
    • Operates as a stand-alone unit or in-line with digital print devices .
    • Handles booklets up to 96 pages/24 sheets, 80gsm.
    • Easy-to-use control panel with LED indicators.
    Part #: SquareIT

    $6394.00

  28. Formax AutoSeal FD 1506 Plus Mid-Volume Pressure Sealer with Integrated Output Conveyor (FD-1506-Plus) - $6374

    • Color Touchscreen Control Panel: Graphics-based and designed for easy, walk-up use.
    • Integrated Output Conveyor: Keeps processed forms in a neat, sequential order, ready for the mail.
    • Compact Desktop Design: The user-friendly design provides easy installation and operation.
    • Drop-In Top Feed System: Produces dependable feeding of forms with no paper fanning required.
    • 14" Form Length Capability: Flexibility to process forms up to 14" in length.
    Part #: FD-1506-Plus

    $6374.00

  29. Standard Horizon Automated Paper Folder (PF-P3200) - $6350

    • Automatic Setup with Simple Operation. Does not require advanced operator skills for setup. Each section is automatically set by selecting sheet size and fold pattern using the operation panel. Six standard fold patterns are available at the press of a button.
    • High-speed Folding - 240 sheets/min. Even high volume direct mail jobs or urgent jobs can be handled with high productivity at maximum production speeds of 240 sheets per minute (A4 / 8.5" x 11" - single fold).
    • Short Make-ready. Setup time is reduced dramatically and accuracy of the setup is improved with an accurate stepper motor.
    • Selective Speed Mode for Comfortable Operation. Silent, Standard, High-Speed and Ultrahigh-Speed
    • Automatic Setup with Simple Operation.
    Part #: PF-P3200

    $6350.00

  30. Spinnit FMMH 3.1 Auto Hydraulic 3-Spindle Paper Drill (FMMH-31) - $6324.26

    • 21/2" Drilling Capacity.
    • Powerful hydraulic lift with foot pedal activation.
    • Sturdy adjustable back-gauge.
    • Easy to adjust moveable head design.
    • Adjustable hydraulic lift speed
    Part #: FMMH-31

    $6324.26

Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80   90   100   200   300   400   500   600   697