Product listing: Drytac MediaShield Heatset Matte UV 4mil 41" x 328' Overlaminate (MT41328) to Keencut 124" Simplex Sheet Material Cutter (60459)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Drytac MediaShield Heatset Matte UV 4mil 41" x 328' Overlaminate (MT41328) - $733.64

    • Film Width: 41"
    • Film Length: 328'
    • Film Thickness: 4.0mil
    • Core Size: 3"
    • Finish: Dead Matte
    Part #: MT41328

    $733.64

  2. Keencut Upgrade Kit for 40" Ultimat Gold Mat Cutter (61320) - $733.5

    • Large diameter roller thrust bearings on the cutting head for total control of both blade carriers. No flex, side play or hooks.
    • Switchable magnetic blade holders for many blades cut so many different thicknesses.
    • Includes a roller lift and hold system, patented micro-stops and the base plate holds all accessories.
    • Upgrades Existing 40" Ultimat Gold Mat Cutter
    • Includes (15) Tech S .012 and (15) Tech S .015 blades
    Part #: 61320

    $733.50

  3. Keencut Upgrade Kit for 40" Ultimat Purple Mat Cutter (61330) - $733.5

    • Large diameter roller thrust bearings on the cutting head for total control of both blade carriers. No flex, side play or hooks.
    • Switchable magnetic blade holders for many blades cut so many different thicknesses.
    • Includes a roller lift and hold system, patented micro-stops and the base plate holds all accessories.
    • Upgrades Existing 40" Ultimat Purple Mat Cutter
    • Includes (15) Tech S .012 and (15) Tech S .015 blades
    Part #: 61330

    $733.50

  4. Keencut Upgrade Kit for Ultimat Gold Mat Cutter (FK-UKUGMC) - $733.5

    • Large diameter roller thrust bearings on the cutting head for total control of both blade carriers. No flex, side play or hooks.
    • Switchable magnetic blade holders for many blades cut so many different thicknesses.
    • Includes a roller lift and hold system, patented micro-stops and the base plate holds all accessories.
    • Upgrades Existing Ultimat Gold Mat Cutter
    • Includes (15) Tech S .012 and (15) Tech S .015 blades
    Part #: FK-UKUGMC

    $733.50

  5. Keencut Upgrade Kit for Ultimat Purple Mat Cutter (FK-UKUPMC) - $733.5

    • Large diameter roller thrust bearings on the cutting head for total control of both blade carriers. No flex, side play or hooks.
    • Switchable magnetic blade holders for many blades cut so many different thicknesses.
    • Includes a roller lift and hold system, patented micro-stops and the base plate holds all accessories.
    • Upgrades Existing Ultimat Purple Mat Cutter
    • Includes (15) Tech S .012 and (15) Tech S .015 blades
    Part #: FK-UKUPMC

    $733.50

  6. Luxor Black 30 Tablet and Laptop Computer Charging Cart (LLTM30-B) - $732.48

    • Meets ANSI/BIFMA standards.
    • Safely stores, charges, and transports up to 30 tablets, Chromebooks, or small laptops.
    • Ideal for businesses, hospitals, and schools with large classes.
    • Flexible dividers adjust to perfectly fit each device.
    • Bottom shelf creates additional storage.
    Part #: LLTM30-B

    $732.48

  7. Drytac MediaShield Heatset Emerytex UV 5mil 38" x 328' Overlaminate (ET38328) - $732.37

    • Features:
    • Matte PVC overlaminates with a pebble texture finish
    • Utilizes various acrylic adhesives (aqueous, solvent and Heatset®) Benefits:
    • Anti-slip properties make it suitable for floor graphics
    • Recommended for use in medium to high traffic indoor display areas
    Part #: ET38328

    $732.37

  8. Akiles Diamond 6 and 7 Corner Rounding Machine 1/2" Radius Knife w/ Lower Blade Pad and Base (AD6/7-K13) - $731.76

    • Product Type: Akiles Knife Thick Blade
    • Knife Radius: 1/2"
    • Cutting Capacity: 2" of material
    • Compatibility: Akiles Diamond 6 or 7 Corner Rounder
    • Comes With: Lower Blade Pad and Blade Base
    Part #: AD6/7-K13

    $731.76

  9. Akiles Diamond 6 and 7 Corner Rounding Machine 1/4" Radius Knife w/ Lower Blade Pad and Base (AKAD6/7-K6) - $731.76

    • Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
    • Includes 1/8" radius thick blade, lower blade pad and blade base.
    • Maximum capacity of 1.97"
    • Radius: 1/4"
    • Part Number: AD6/7-K6
    Part #: AKAD6/7-K6

    $731.76

  10. Akiles Diamond 6 and 7 Corner Rounding Machine 1/8" Radius Knife w/ Lower Blade Pad and Base (AKAD6/7-K3.5) - $731.76

    • Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
    • Includes 1/8" radius thick blade, lower blade pad and blade base.
    • Maximum capacity of 1.97"
    • Radius: 1/8"
    • Part Number: AKAD6/7-K3.5
    Part #: AKAD6/7-K3.5

    $731.76

  11. Akiles Diamond 6 and 7 Corner Rounding Machine 3/8" Radius Knife w/ Lower Blade Pad and Base (AKAD6/7-K10) - $731.76

    • Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
    • Includes 3/8" radius thick blade, lower blade pad and blade base.
    • Maximum capacity of 1.97"
    • Radius: 3/8"
    • Part Number: AD6/7-K10
    Part #: AKAD6/7-K10

    $731.76

  12. Akiles Diamond 6 and 7 Corner Rounding Machine 5/8" Radius Knife w/ Lower Blade Pad and Base (AKAD6/7-K16) - $731.76

    • Product Type: Akiles Knife Thick Blade with Pad - Base
    • Knife Radius: 5/8"
    • Cutting Capacity: 2" of material
    • Compatibility: Akiles Diamond 6 or 7 Corner Rounder
    • Part Number: AKAD6/7-K16
    Part #: AKAD6/7-K16

    $731.76

  13. Akiles Diamond 7 Corner Rounding Machine Radius Knives w/ Lower Blade Pad and Base (AKAD6/7-RK) - $731.76

    • Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
    • It includes blade, lower blade pad and blade base.
    • Maximum capacity of 1.97"
    • Radius: 1/8" - 3/8"
    • Provides up to 1,000 heavy-duty cuts
    Part #: AKAD6/7-RK

    $731.76

  14. Pivano 103-1 FG103 Replacement Blade (JH-42870) - $731.39

    • Compatible Models: Pivano 103-1, FG 103
    • Material: Standard Inlay
    • Holes: 30
    • Length: 51.85"
    • With: 5.708"
    Part #: JH-42870

    $731.39

  15. Rhin-O-Tuff 3:1 Square Die Set W/ Thumbcut For HD6500 and HD7000 - Open Box (MYR-16-131-4) - $731.3

    • 3:1 Pitch Square Hole Die With Thumbcut
    • .333 Hole Spacing
    • .156 Square Hole Size
    • Rhin-O-Tuff Part Number: 000907T
    • 3:1 Pitch Square Hole Die With Thumbcut
    Part #: MYR-16-131-4

    $731.30

  16. HSM Securio Auto Feed 150C Level P-5 Micro Cut Shredder (HSM2082) - $731.21

    • Made in Germany. The high quality materials and proven HSM "Made in Germany" quality guarantee you are receiving a safe and durable machine - and also 3 years warranty.
    • Solid steel cutting rollers. The induction-hardened, solid steel cutting rollers can easily cope with staples and paper clips and guarantee durability.
    • Time-saving autofeed document shredding. Stacks of paper can not only be shredded reliably and conveniently but also in a time-saving manner.
    • For continuous operation. The powerful motor ensures a high cutting capacity and reliable continuous operation.
    • Nanogrip for reliable sheet intake. The document shredder with autofeed has a specially developed intake and transport rollers which use Nanogrip Technology. This enables sheet after sheet to be pulled in securely from the stack of paper.
    Part #: HSM2082

    $731.21

  17. Mactac Permacolor RAYZor 1.5mil 54" x 150' Clear Matte Cast Vinyl Overlaminate (LF3638G) - $729.48

    • Physical Properties Property Typical Values Test Method Thickness, inches (µm) Film plus adhesive Total product 0.0025 (64) 0.0039 (100) ASTM D-645 Peel Adhesion lb./in. (N/25mm) 180° on stainless steel -20 min - 24 hrs. 3.0 (13.1) 3.7 (16.5) PSTC-1 Quick Tack, lb./in² (N/25mm) Stainless Steel 2.5 (11) FTM - 9 Dimensional Stability, (%) 48 hours @ 158°F max 0.01 FTM - 14 10” x 10” Sample Bonded to aluminum Gloss (60°) 2 – 10 Temperature Ranges Minimum Application: End Use: 50°F (+10°C) -50°F to 225°F (-45°C to 107°C) Surface Burning Characteristics (Meets ANSI, NFPA, and IFC as class A) Flame Spread Smoke Density 0 30 ASTM E84-01 or ANSI/NFPA 255 or IFC 8-1 Adhesive pH Neutral TAPPI-529
    • Chemical Resistance Salt Water Spray .................... ASTM B 117-03
    • 100 hours @ 5% solution ........... no change Water Immersion
    • 100 hours immersed @ RT ........... no change Other immersion tests show:
    • Gasoline (30 min.) ........... No effect
    Part #: LF3638G

    $729.48

  18. Mactac Permacolor RAYZor 1.5mil Clear Matte Cast Vinyl Overlaminates (MACTAC-LF363G) - $729.48

    • Features and Benefits:
    • Built-in UV protection
    • Part of the B•free application warranty
    • Typical Uses:
    • Highly conformable for vehicle graphics, fleet, marine and rough wall graphics
    Part #: MACTAC-LF363G

    $729.48

  19. Drytac Artshield Mattex UV 3mil 51" x 300' Overlaminating Film (MX51300PP) - $729.22

    • Finish: Satin-Matte PVC
    • Film Length: 300'
    • Film Width: 51"
    • Film Thickness: 3 mil
    • Base Film:: 2.0 mil (50 micron) PVC (vinyl)
    Part #: MX51300PP

    $729.22

  20. Akiles DuoMac 421 4:1 Coil and 2:1 Wire Binding Machine (AKDUOMAC421) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMAC421

    $729.00

  21. Akiles DuoMac 431 4:1 Coil and 3:1 Wire Binding Machine (AKDUOMAC431) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMAC431

    $729.00

  22. Akiles DuoMac 521 5:1 Coil and 2:1 Wire Binding Machine (AKDUOMAC521) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMAC521

    $729.00

  23. Akiles DuoMac 531 5:1 Coil and 3:1 Wire Binding Machine (AKDUOMAC531) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMAC531

    $729.00

  24. Akiles DuoMac 541 5:1 and 4:1 Pitch SpiralCoil Binding Machine (AKDUOMAC541) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMAC541

    $729.00

  25. Akiles DuoMac C21 Plastic Comb and 2:1 Wire Binding Machine (AKDUOMACC21) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMACC21

    $729.00

  26. Akiles DuoMac C31 Plastic Comb and 3:1 Wire Binding Machine (AKDUOMACC31) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMACC31

    $729.00

  27. Akiles DuoMac C41 Plastic Comb and 4:1 Coil Binding Machine (AKDUOMACC41) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMACC41

    $729.00

  28. Akiles DuoMac C51 Plastic Comb and 5:1 Coil Binding Machine (AKDUOMACC51) - $729

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: AKDUOMACC51

    $729.00

  29. Akiles WireMac Combo Wire / Plastic Comb Binding Machine (AKWMC) - $729

    • Heavy-duty / Multi-Functional (Versatile) / Reliable / Easy to use
    • Die Disengagement Pins: All dies can be independently disengaged, allows punching of any size document while preventing partial side-end perforation.
    • Side Margin Control: Provides and evenly centered punch for all document sizes.
    • Vertical Wire Closer
    • Diameter Scale: Measures document's thickness in order to select best wire/comb size option
    Part #: AKWMC

    $729.00

  30. Keencut 124" Simplex Sheet Material Cutter (60459) - $729

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.
    • Blade locking thumb screw adds safety and convenience.
    Part #: 60459

    $729.00

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   40   50   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   90   100   110   120   130   140   150   160   200   300   400   500   600   700   800   900   1,000   1,102