Product listing: Ledco Digital 42" Laminator & Mounter (42B-0008) to Formax Square iT2 Squareback Booklet Finisher (FDiT2)

View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Ledco Digital 42" Laminator & Mounter (42B-0008) - $15998.99

    • A Quality silicone rubber laminating rollers release materials easily and maintain their flexibility for a good edge seal.
    • Two sets of rollers keep the film flat and tight while heat laminating so that the automatic fans cool and set the adhesive. When thermal films cool in a slack state, the surface of the lamination is wavy and rippled.
    • Supply roll tension is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels.
    • Variable speed allows thinner films to be run faster, and enables mounting or the use of thicker films, which require slower speeds.
    • Independent temperature controls for top and bottom heaters allow the use of different materials on front and back of an image.
    Part #: 42B-0008


  2. D&K Group &K Expression 44 Twin Laminator (EXP44) - $15985

    • Dimensions: 53"x62"x43"
    • Weight: Net 850 lbs
    • Electrical: 220V single phase 30 amps w/ neutral
    • Working Width: 43"
    • Maximum Temperature; 230F
    Part #: EXP44


  3. Graphic Whizard Wizard CreaseMaster PLUS+ Pneumatic Creaser (CreaseMasterPLUS+) - $15965

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Inverted and regular impact creasing in the same pass!
    • Up to 10 impact creases per sheet.
    • Up to 20 jobs can be stored into memory.
    • Easy-to-use programming. Set up in minutes!
    Part #: CreaseMasterPLUS+


  4. MBM Triumph 5260 20-3/8" Automatic Programmable Cutter with VRCut Software (CU0489) - $15366

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0489


  5. Formax HDD/SSD Hard Drive Shredder with Recording System (FD 87HDS-R) - $15296

    • Standard Features
    • Separate Shredding Chambers: Accommodate 3.5" HDD and 2.5" HDD & SSD drives
    • Recording System: Internal and external cameras for optimal security. System includes a 64GB SD card, a higher capacity SD card can be used for extended recording.
    • Hardened Solid Steel Cutting Blades: Specially ground for strength and durability
    • LED Control Panel: Provides centralized control and displays real-time status
    Part #: FD 87HDS-R


  6. GBC 5031 31" Automatic Cutter (1711987) - $15289.91

    • Speed: Up to 50 fpm
    • Weight: 220 lbs.
    • Power Requirements: 115 V, 2 A
    • Warranty: 90 days labor & 1 year parts
    • Safety Certification: C/UL listed
    Part #: 1711987


  7. Baum 714XAPA Autofold Air Feed Tabletop Paper Folder (BAUM714XA) - $15255

    • Capability to feed and fold 25.5 inch long paper for tri-folding brochures etc. (The 714XA is the only machine in this size and price range that can do this).
    • Multiple job memory of 20 custom entry folds with easy recall.
    • PLC touch screen control panel with color display and easy to follow pictographs.
    • Batch counter that can count up or count down.
    • BAUM Turbo Wheel air/vacuum feeding technology.
    Part #: BAUM714XA


  8. Formax AP3 Monochrome Inkjet Digital Address Printer with Integrated Feeder (AP3-MONOCHROME) - $15250

    • Operating Features
    • User-Friendly Touchscreen: 4.5" color touchscreen with adjustable backlight
    • Fast: Prints up to 26,000 #10 envelopes per hour, up to 34,000 postcards per hour
    • Two Independent Print Heads: 3-pen stitched + 3-pen stitched design
    • Job Memory: Store and recall common print jobs, up to 16GB
    Part #: AP3-MONOCHROME


  9. Royal Sovereign Rollover Flexi 55" x 113" Flatbed Applicator for Mounting and Laminating (102514) - $15250

    • Key Features:
    • Comprising all the essential qualities of the existing line of Rollover Classic Flatbed Applicators
    • Offers quick dismantling to facilitate entering of premises having difficult access.
    • Having no overhead gantry above the roller, the access to media and substrates while working is superior.
    • Ideal for rigid panel application and laminating digital prints.
    Part #: 102514


  10. HSM V-Press 820 Plus Vertical Baling Press (HSM6143) - $15120

    • State-of-the-art microprocessor controller and membrane keypad with LED display.
    • Special retaining claws optimize the compression of the pressing material, increasing both loading volume and bale output.
    • Quick and easy press assembly.
    • Loading flap with hand wheel door lock.
    • Color: Light Grey
    Part #: HSM6143


  11. Formax 20.5" Hydraulic Programmable Guillotine Cutter (Cut-True 29H) - $15026

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut
    Part #: Cut-True 29H


  12. GFP 65" Dual Heat Wide Format Roll Laminator (865DH-3R) - $15009.5

    • Dual heat for thermal and cold applications
    • Front/Rear Swing-out shafts
    • Labor saving swing-out 3" Quick-Grip supply shafts.
    • Two front rewind shafts allow thermal encapsulation of prints from a roll.
    • Drop-in Quick-Grip rewind shafts.
    Part #: 865DH-3R


  13. YUL Programmable 22" Electric Paper Cutter with Wifi/3G Option (EPC022 ) - $15000

    • Performance:
    • Fully programmable up to 1000 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC022


  14. US Paper Counters Count-Wise I High Volume Paper Counter and Batch Tabber (CW1) - $14999

    • Applications:
    • Exact count deliveries.
    • Maximize efficiency.
    • Control quantity at every stage.
    • Fast, accurate tabbing.
    Part #: CW1


  15. Challenge Titan 200 20" Hydraulic Programmable Cutter with Shield (CH-TITAN200) - $14995

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200


  16. Fujipla ALM 3222 Automatic Laminator and Trimmer (ALM3222) - $14995

    • Laminates paper up to 130 lb cover stock
    • Virtually Unattended Operation
    • 120 Volt, 15 amp service with economy mode
    • Ultra quick warm up of less than 5 minutes
    • Sheet sizes: 13" x 19", 12" x 18", 11" x 17", & 8.5" x 11"
    Part #: ALM3222


  17. Morgana AutoCreaser Pro 33A Automatic Creasing and Perforating Machine (AutoCreaser-Pro-33A) - $14990

    • New 'QuickBlade' creasing blade.
    • 7" SmartScreen touch screen.
    • Intuitive and easy to use.
    • Fully automatic.
    • Up to 16 creases per sheet.
    Part #: AutoCreaser-Pro-33A


  18. Royal Sovereign 65" Heat Assist Wide Format Laminator (RSC-6500H) - $14928.57

    • Max laminating width: 65"
    • Max Mounting Gap: 2"
    • Max Laminating Speed: 28ft/min.
    • Speed Control: Yes
    • Transport Type: 2 Rollers
    Part #: RSC-6500H


  19. Standard PF-40L Auto Suction Feed Tabletop Folder with Stand (PF-40L-MT-40L) - $14603.59

    • Quick and Easy Setup. Simply select sheet size and fold pattern and each section sets-up automatically. The folder is equipped with 2 buckles to meet a variety of folds. Fine-tune adjustment can be done at 0.1 mm for accurate folding.
    • Simple Operation Panel. User friendly operator console for easy operation and setting. Programming such as pre-set counting and job memory can be set-up for efficient production.
    • High Performance Suction Rotor Feeding. Uniquely designed suction rotor feeding is employed to meet high speed production up to 390 sheets per minute, wide range of paper stock can be fed with ease.
    • High Capacity Feeder. High capacity feed table (1,300 sheets of 64 gsm can be loaded) to minimize sheet loading during longer production runs.
    • Crisp Tight Fold Quality. Crisp tight fold quality is ensured with uniquely designed combination of soft polyurethane foam rubber and steel rollers. Roller gap can be adjusted with a simple dial to fold thinner to thicker sheets.
    Part #: PF-40L-MT-40L


  20. Fujipla Duo System Wide Format Laminator (LPV1200) - $14594

    • Maximum Laminating Width: 47 inches
    • Maximum Laminating Thickness: 1 inch
    • Laminating Film Thickness: 1.2 - 10 mil
    • Film Types: PSA and Thermal
    • Temperature Range: Room Temperature to 270° F
    Part #: LPV1200


  21. Graphtec 24" x 36" Flatbed Vinyl Cutter and Plotter (FCX2000-60VC) - $14500

    • Stronger Media Hold Down. Distance between the holes has been improved to 20 mm , as a result, FCX2000 Series provides stronger suction power to hold heavier and thicker medias down.
    • Improved Vacuum Suction! holds media with the use of external electric vacuum pump. This is the preferred method for heavier and thicker media. The Redesigned Cutting Table has increased hold-down capability by its increased number of vacuum holes. This redesign is significantly valuable when cutting smaller objects that have less of surface area.
    • Dual tool holder with 500 gf on tool 1 and 1,000 gf on tool 2
    • Provided tools suitable for many applications.
    • The FCX2000 series has 2 tool holder in the carriage.
    Part #: FCX2000-60VC


  22. MBM Triumph 6655 25.5" Electric Programmable Paper Cutter (MBM-CU0491) - $14449

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0491


  23. HSM FP3000 Barrel Crusher (HSM6820-FP3000) - $14281

    • Low height and small footprint.
    • Press ram with spikes for opening the barrels and collector tray for residual liquid.
    • Enclosed on all sides with inspection window for safety and dust reduction.
    • Membrane key-pad with LED for operator safety.
    • Automatic return stroke saves time, overhead and personnel costs.
    Part #: HSM6820-FP3000


  24. HSM 40VL Baler for FA400 Shredders (HSM6111167) - $14265.38

    • Automatically and economically compresses material into bales suitable for recycling.
    • Ejection lever for quick and easy removal of baled material.
    • Wear-free hydraulic system requires very little maintenance.
    • Shredder/baler combinations are manufactured with dust-free connections.
    • Easy to use control panel for a safe and efficient operation.
    Part #: HSM6111167


  25. Formax ATLAS-AS Air-Feed Document Folder (FDATLAS-AS) - $14195

    • High-Speed Output: Large jobs are processed quickly at speeds of up to 27,000 pieces per hour.
    • Powerful Air Suction Feed Table: Handles a variety of coated and non-coated stock, in a range of paper weights and sizes, up to 26.5" in length.
    • 7" Color Touchscreen Control Panel: Program and make adjustments quickly and easily with graphics-based menus.
    • Low-Pressure Air Chamber: Designed specifically to control curled paper prior to entering fold rollers.
    • Simple, Accurate Alignment : Squares and aligns sheets prior to feeding .
    Part #: FDATLAS-AS


  26. Count AccuCreaser Air Modular Digital Creasing Machine (CATMDCM) - $14170

    • Provides modes for creasing, perforating or feeding.
    • Bottom vacuum feed with sheet spacing control.
    • CAM actuated compression creasing ensures maximum crease accuracy.
    • Automated distance recognition allows auto setups for your most common creases and corresponding folds, including perfect bind.
    • Perform up to 4 perfs at a time (including micro perf).
    Part #: CATMDCM


  27. Morgana BM350 Hand-Fed Modular Booklet Maker (10206010) - $14045

    • It can staple and fold up to 30 sheets of 80gsm paper, creating 140-page booklets
    • Intuitive user interface.
    • Patented folding mechanism provides a sharp professional finish.
    • Book thickness measuring automatically sets the fold rollers.
    • Heavy duty stapling heads with 5000 staple cartridge.
    Part #: 10206010


  28. Dahle PowerTEC 828 HD Hard Drive/Paper Shredder (DH-828HD) - $13995

    • Powerful hard drive and multimedia combination shredder.
    • Security Level H-4 / P-3 for the destruction of sensitive information.
    • Mighty 4.5 Hp continuous duty motor with chain driven operation.
    • Automatic jam protection- Machine cycles through forward and reverse until shredding is complete.
    • LED keypad with easy-to-use controls for simple operation.
    Part #: DH-828HD


  29. Fastbind PUREVA XT Perfect Binder (FB-PUREVAXT) - $13995

    • PUR & EVA Hot Melt binding in one machine.
    • Produces hard and soft cover books in a variety of sizes and thickness.
    • New dust free PGO Microcut spine roughening.
    • Easy to use and low maintenance.
    • Interchangable glue cartridges that allows you to easily change between PUR & EVA glues.
    Part #: FB-PUREVAXT


  30. Formax Square iT2 Squareback Booklet Finisher (FDiT2) - $13995

    • Standard Features:
    • Color touchscreen: Guides users through the finishing process with text and bold graphics
    • Powerful Squaring Unit: Squares bindings on booklets up to 50 folded and stapled sheets / 200 page booklets of 20# Bond sheets
    • Efficient: Produces a square binding and face trims in a single pass
    • Compact Unit: Multiple functions in a small footprint
    Part #: FDiT2


Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80   90   100   200   300   400   500   600   700   800   900   1,000   1,018