Product listing: 3mil Diamond Matte Digital UV Laminating Film - 51" x 500' (3" Core) (CBD3DUV51500M-3) to MasterBind Master Set of 9mm Standard Fonts USA (1161-D5000)
-
3mil Diamond Matte Digital UV Laminating Film - 51" x 500' (3" Core) (CBD3DUV51500M-3) - $590.18
- Film Type: Digital UV Laminating Film
- Thickness: 3 Mil
- Roll Width: 51"
- Roll Length: 500'
- Film Finish: Matte
Part #: CBD3DUV51500M-3 -
Rhin-O-Tuff 4:1 .2475 Oval Hole Die Set For OD4000 and OD4800 (04444A) - $657
- 4:1 Pitch Oval Hole Die
- .2475 Hole Spacing
- .188 x .157 Oval Hole Size
- Rhin-O-Tuff Part Number: 04444A
- 4:1 Pitch Oval Hole Die
Part #: 04444A -
White 3/16" Gator Mounting Board 30" x 42" with Permanent Adhesive - 10pk (550447G-AE) - $589.87
- Board Type: Gator Board with a pressure sensitive or cold adhesive
- Board Thickness: 3/16"
- Board Size: 30" x 42"
- Board Color: White
- Quantity: 10 Per Box
Part #: 550447G-AE -
Keencut 84" Simplex Sheet Material Cutter FK (60457) - $589.5
- Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
- Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
- The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
- Quick fit thread cap for easy accessory attachment.
- Blade locking thumb screw adds safety and convenience.
Part #: 60457 -
Quartet DuraMax 6' x 4' Planning Board with 1" x 1" Grid (QRT-PP1164) - $589.44
- Whiteboard planner features an ultra-durable DuraMax® porcelain surface that is magnetized to provide extra bulletin board functionality
- Perfect for heavy-use planning, organization and collaboration needs
- Easy-to-clean writing surface requires minimal use of Quartet® cleaning solutions
- 6'W x 4'H board size; 1" x 1" grid squares
- Graphite finish frame with attached marker tray
Part #: QRT-PP1164 -
Quartet DuraMax Planning Board with 1" x 1" Grid (QRT-PP11) - $589.44
- Whiteboard planner features an ultra-durable DuraMax® porcelain surface that is magnetized to provide extra bulletin board functionality
- Perfect for heavy-use planning, organization and collaboration needs
- Easy-to-clean writing surface requires minimal use of Quartet® cleaning solutions
- Available in 3 different sizes; 1" x 1" grid squares
- Graphite finish frame with attached marker tray
Part #: QRT-PP11 -
Challenge 305XG Alternative #2238-6 Diamond High Speed Steel Blade (JH-33470HSS) - $588.29
- Type of Blade: High Speed Steel
- Dimensions (L x W x T): 35.250" x 4.000" x .374"
- Holes/Slots: 12H
- Hole Size: 3/8"-16
- Type of Blade: High Speed Steel
Part #: JH-33470HSS -
Perfecta Royal Zenith PA92 S87 Seypa 92 Replacement Blade (JH-42750) - $588.29
- Compatible Models: Perfecta, Royal Zenith, Seypa PA 92, S 87, SEYPA 92
- Material: Standard Inlay
- Holes: 21
- Length: 42.913"
- With: 5.512"
Part #: JH-42750 -
Polar Prism Saber 107EL 112EL 115 115CE 115EL Blade (JH-44750) - $588.29
- Compatible Models: Polar, Prism, Saber 107 EL, 112 EL, 115, 115 CE, 115 EL
- Material: Standard Inlay
- Holes: 26
- Length: 54.724"
- With: 6.299"
Part #: JH-44750 -
3mil Matte Digital Ultra Grip Laminating Film - 18" x 2000' (CBDUG3182000M-03) - $588.12
- Film Type: Digital Ultra Grip Laminating Film
- Thickness: 3 Mil
- Roll Width: 18"
- Roll Length: 2000'
- Film Finish: Matte / Satin
Part #: CBDUG3182000M-03 -
GBC Arctic White Mount 43" x 300' (3" Core) (9300906) - $529
- Film Type: GBC Arctic White Mount
- Thickness: n/a
- Roll Width: 43"
- Roll Length: 300'
- Film Finish: n/a
Part #: 9300906 -
Mactac Permacolor ColorTrans Optically Clear 61" x 150' Perm/Rem Mounting Film (CT2261L150) - $564
- Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
- Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
- Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
- Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
- General Comments
Part #: CT2261L150 -
Formax Replacement Blade for Cut-True 31A and 31H Cutters (FDCT31-10) - $586.25
- Product Type: Replacement Blade
- Designed for: Formax Cut-True 31A and 31H
- Product Number: FDCT31-10
- Product Type: Replacement Blade
- Designed for: Formax 31A and 31H
Part #: FDCT31-10 -
Mactac Permacolor Gemini XT 51" x 400' Opaque White Rubber Back Mounting Film (PP5051L400) - $564
- Features and Benefits:
- High-tack, high-peel adhesions and high cohesive strength for quick adhesion
- Good for low energy surfaces such as Sintra, plastic and styrene
- Typical Uses:
- General purpose mounting of digital images
Part #: PP5051L400 -
Quartet 6' x 4' Motion Marker and Bulletin Room Divider (QRT-6640MB) - $585.2
- Double-sided room divider is also a mobile presentation easel and collaboration system
- DuraMax® porcelain whiteboard writing surface will not stain, ghost, scratch or dent
- Fabric bulletin board posting surface is self-healing to eliminate unsightly pin holes
- Repositionable flipchart holders also included
- 4'W x 6'H size provides privacy without being bulky
Part #: QRT-6640MB -
Dahle 799 Stand for Model 472 Premium Rolling Trimmer (DA799) - $625.92
- Type: Stand for Professional Rolling Trimmer
- Compatible With: Dahle Model 472 Premium Rolling Trimmer
- Dimensions : 79 1/2" W x 15 1/8" L
- Quantity: 1 Unit per Carton
- Part Number: 799
Part #: DA799 -
Fellowes Refurbished Powershred 225Ci Cross Cut Paper Shredder - 3825001 (3944701) - $583.32
- Auto Start/Stop: Yes - Electronic
- Run Time: Continuous
- Color: Black/Dark Silver
- Casters: Yes
- Basket Capacity (gallons): 16
Part #: 3944701 -
Mactac Permacolor ColorTrans Optically Clear 54" x 150' Perm/Self-Wetting Rem Mounting Film (CT2554W54L150) - $583.29
- Physical Properties Property Typical Values Test Method Thickness, inches (µm) Carrier plus adhesive Total product 0.0032 (81) 0.007 (178) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Glass - 30 minutes 4.6 (17.5) 1.0 (5.2) 5.2 (22.7) 1.0 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 300°F (-29° to 150°C)
- Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
- Durability CT2500 will give satisfactory performance for up to 3 years outdoor. Indoor durability can be up to 20 years under standard conditions and with high quality printing inks.
- Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
- Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
Part #: CT2554W54L150 -
19-7/8" x 19-7/8" Crystal Clear Adhesive Vinyl Pockets 100pk (STB-375) - $582.99
- Pocket Material: High Quality Crystal Clear Vinyl
- Pocket Thickness: 8 ga.
- Adhesive Type: Permanent (Sticks To Almost Any Flat Surface)
- Opens On: Short Side With 1/4" Lip
- Inside Dimensions: 19-7/8" x 19-7/8"
Part #: STB-375 -
HSM Securio B26c Level P-4 Cross Cut Shredder (HSM-1803) - $582.17
- Made in Germany: All HSM Classic & Securio Models are Made in Germany. Precision Engineering. TAA Compliant.
- Solid Steel Cutting Cylinders: Cutting Heads are Manufactured from 100% Steel. Maintains High Cutting Capabilities While Using Less Energy. V-groove Technology Ensures Precise Cutting.
- Cutting Cylinder Lifetime Warranty: Lifetime Warranty on Solid Steel Cutting Cylinders. Patented "V-Tek" Cutting Groove Technology. Higher Cutting Capacity. Lower Power Requirements.
- Anti-Jam Technology with Reverse Function: Prevents Jams When Machine is Overloaded. Increasing Productivity. Saves Unanticipated Repair Costs.
- Continuous Duty Motor: Allows for Continual Shredding with no Down Time. Longer Run Time Resulting in Reduced Labor Cost. Increasing Productivity.
Part #: HSM-1803 -
Drytac MediaTac 51" x 328' Pressure Sensitive Aqueous Adhesive (PSA26-51328) - $582.04
- Roll Width: 51"
- Roll Length: 328'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
Part #: PSA26-51328 -
1.7mil Matte Digital Ultra Grip Laminating Film - 15" x 3000' (CBDUG17153000M-03) - $582.04
- Film Type: Digital Ultra Grip Laminating Film
- Thickness: 1.7 Mil
- Roll Width: 15"
- Roll Length: 3000'
- Film Finish: Matte / Satin
Part #: CBDUG17153000M-03 -
Quartet 6' x 3' Indoor Enclosed Cork Bulletin Board (QRT-2366) - $582.003
- Enclosed bulletin board has a natural cork surface
- Designed for indoor use
- 6'W x 3'H**
- 3 locking, shatterproof, acrylic doors protect items
- Full-length hinges make it easier to change signage
Part #: QRT-2366 -
SealerSales 12" Automatic Impulse Sealer w/ 10mm Seal Width (W-3010A) - $581.97
- Automatic impulse sealing with precise electronic control.
- Dual mode operation: automatic or manual.
- Foot switch allows both hands to be free.
- 3 separate control settings for sealing time, recycle time, and congealing time to produce consistent seals.
- Includes electric foot switch and worktable.
Part #: W-3010A -
Renz Combi S Plastic Comb Binding Machine (RCombiS) - $581
- Binds up to 480 sheets
- Closure control guarantees easy comb closure
- Gauge to alter margin for a stronger bind
- Special hardened punch pins for long lasting life
- Staggered punching pins for better punching
Part #: RCombiS -
Keencut 44" Evolution 2 Bench (60949) - $580.5
- Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
- Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
- Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
- Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
- When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
Part #: 60949 -
Keencut Evolution 2 Bench (FK-E2B) - $580.5
- Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
- Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
- Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
- Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
- When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
Part #: FK-E2B -
MBM Ideal Triumph 7228, 721-06 LT Replacement Blades (MB-AC0657) - $498.1
- Compatible Models: 7228, 721-06 LT
- Length: 33-1/8"
- Part Number: MB-AC0657
- Compatible Models: 7228, 721-06 LT
- Length: 33-1/8"
Part #: MB-AC0657 -
MasterBind Master Set of 4mm Standard Fonts USA (1161-D4000) - $580
- Includes: Capital and small caps letter, numerical numbers and symbols
- Font Sizes: 4mm (0.16")
- Part Number: 1161-D4000
- Capital and small caps letter, numerical numbers and symbols
- 4mm font size
Part #: 1161-D4000 -
MasterBind Master Set of 9mm Standard Fonts USA (1161-D5000) - $580
- Includes: Capital and small caps letter, numerical numbers and symbols
- Font Sizes: 9mm (0.35")
- Part Number: 1161-D5000
- Includes capital and small caps letter, numerical numbers and symbols
- 9mm font size
Part #: 1161-D5000
