Product listing: HSM SP4040c Cross-Cut Shredder/Baler Combination (HSM-3514) to Royal Sovereign 65" Calender Heat Transfer System W/ 10" Infra-Red Quartz Drum and Work Table (PX-180)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. HSM SP4040c Cross-Cut Shredder/Baler Combination (HSM-3514) - $22756.53

    • Optimized cutting device technology destroys 120 sheets of paper, creating 208 cross-cut / confetti-cut particles per page;
    • Compresses 6-8 bales per hour.
    • Also shreds staples, paper clips, credit/store cards, CDs/DVDs, floppy disks, and USB sticks.
    • Obliterates large quantities such as archives and bulk storage.
    • Material feed via electronic conveyor belt.
    Part #: HSM-3514

    $22756.53

  2. Royal Sovereign 65" Belt-Free Fixation Calender with 10" Infra-Red Drum (RFCI-1826) - $22900

    • Optimal Transfer Width: 65" (1650 mm)
    • Drum Diameter: 10" (260 mm)
    • Max. Temperature: 428°F (220°C)
    • Max. Speed: 6.5 ft./min. (2 m/min.)
    • Warm Up Time: 1 Hr.
    Part #: RFCI-1826

    $22900.00

  3. Tec Lighting TruCoat 30" Hand-Fed UV Coater (TRUV-30A) - $22935

    • Apply gloss-satin and matte coatings.
    • Coat toner based, offset or inkjet with ease.
    • Quick change textured rollers for an array of finishes.
    • Speeds of up o 2,000SPH.
    • From start to coating in less than 5 Minutes.
    Part #: TRUV-30A

    $22935.00

  4. Formax Standard High Volume Industrial Burster (FD 676) - $23695

    • Paper weight: up to 104 lb card stock, up to 8 parts
    • Speed: Variable, 30 -500 feet per minute
    • Form Size: 2.75" -19"W x 2.75" -17"L (slitting) 2.75" -16.75"W x 2.75" ? 17"L (non-Slitting)
    • Dimensions: 58" L x 41" W x 56.5" H with cabinet
    • Weight: 428 lbs
    Part #: FD 676

    $23695.00

  5. Standard Horizon BQ-160 PUR Single-Clamp Perfect Binder (BQ-160PUR) - $23760

    • Suitable to produce personalized photo book production such as wedding albums and travel albums.
    • Perfect binding, tape binding and lining binding (for case binding) can be performed.
    • Up to 40mm thickness of book can be produced.
    • Optional CRB-160 impact creaser can be on-line to prepare creased (up to 8 line) cover.
    • Optional VS-160 fume extractor is available for clean operation.
    Part #: BQ-160PUR

    $23760.00

  6. GBC 5031TS Roll Laminator (1711718) - $23982.29

    • Film speed: 4 to 35 feet per minute
    • Maximum film width: 31"
    • Film gauge: 1.5 mil to 10 mil
    • Accommodates 10" diameter rolls for fewer film changes on long runs
    • Three slitters allow edge and center slitting of 2-up jobs
    Part #: 1711718

    $23982.29

  7. Morgana AutoCut Pro Slitter-Cutter-Creaser (AutoCut-Pro) - $23990

    • Max sheet size: 13" x 19" or 13" x 27.5" with optional long sheet kit.
    • 8 13"x19" sheets per minute (24 up business cards).
    • 32 - 130lb cover.
    • 150 job recall.
    • Up to 5000 letter sheets per hour when creasing.
    Part #: AutoCut-Pro

    $23990.00

  8. HSM HDS 230-1 Hard Drive & Back Up Media Single Stage Shredder (HSM1778) - $24034.5

    • Order number: HSM1778
    • Shredder material: Paper, Paper Clip, CD/DVD, Floppy Disk, Flash Drive and Credit/Store Cards
    • Cutting type: Cross Cut
    • Security level (DIN 66399): O-1 / T-2 / E-2/ H-4
    • Cutting width: 0.78 in
    Part #: HSM1778

    $24034.50

  9. Plastikoil PBS 3000 QS Automatic Coil Inserter and Crimper (PBS-3000QS) - $24400

    • Comes Complete: - Set of 15 Spine Formers - Tool Kit - Photo Instruction Manual & Instructional DVD
    • Productivity. - As high as 600 books/hour (Available in .2475" OR 4:1 OR 6 mm Pitch) - For diameters from 6 mm to 20 mm
    • Recommended Wider 3:1 OR 2.5:1 Pitch For larger diameters up to 30 mm
    • Coil Capabilities. - 6 mm through 20 mm - Up to 30 mm in wider pitch options
    • Available Formats. - 12"/A4 model (Binding edges from 5" to 12"/12.7 to 30.5 cm) - 17"/A3 model (Binding edges from 5" to 17"/12.7 to 43 cm)
    Part #: PBS-3000QS

    $24400.00

  10. Afinia Label DLF-220L All-in-One Digital Label Finisher (AFN28053) - $24400

    • All-in-one system that unwind, laminate, digitally plotter-cut, remove waste, slit, and rewind that produces professionally cut and finish short-run labels from your digital color label printers
    • Has an advanced plotter cutting technology that allows you to cut different types of material and shapes, on the fly, without the additional cost of dies
    • Equipped with a cutter management tool/camera black-mark registration system that provides cutting speed optimization without synchronization issues
    • Its ultra-precise cutting abilities, easily produce beautiful full-bleed labels.
    • Can also laminate labels for added durability—no need for special label media
    Part #: AFN28053

    $24400.00

  11. Paitec Heavy Duty Desktop Pressure Sealer and Folder (MX17000) - $24495

    • Adjustable Speed. Allows operator to work at a comfortable speed and quiet environment.
    • Heavy Duty Cycle. Quality-engineered parts allow the MX17000 to process up to 500,000 sheets per month.
    • Reverse (RFR) Friction Roller. Unique RFR system, automatically detects, singulates, and corrects doubles without any operator intervention for increased productivity.
    • Four Roller Sealing Unit. A second pair of sealing rollers enables enhanced sealing quality at higher speed.
    • Optional 50" conveyor which holds up to 1,200 completed forms.
    Part #: MX17000

    $24495.00

  12. Morgana High-Production Booklet Maker (BM2000S) - $24645

    • Air assist feeder unit.
    • Large LCD programmable display.
    • Up to 4000 sets per hour in collate mode.
    • Feed pre-collated sets from digital devices.
    • High quality ISP stitching head.
    Part #: BM2000S

    $24645.00

  13. Truline Preferred Pack Semi Automatic Sleeve Wrapper with Attached Tunnel (SFE-800SA) - $24650

    • Speed: 5 to 15 PPM (Depending on product size and film thickness.)
    • Electrical: 220 Volt, 3 Phase, 60 Amp
    • Seal Size: 29.5"
    • Max Roll Width: 27"
    • Max Package Length: 19.5"
    Part #: SFE-800SA

    $24650.00

  14. James Burn Lhermite EPX 700 Heavy Duty Punch (04JBEPX700) - $24695

    • Effective Punching thickness: 3-5mm dependant on materials
    • Operating speed: 120 strokes/minute
    • Sheet width: 700mm
    • Punching capacity : 4mm
    • Max Sheet Width: 700mm
    Part #: 04JBEPX700

    $24695.00

  15. Graphic Whizard Wizard CreaseMaster Platinum Pneumatic Creaser (CreaseMasterPLTNM) - $24775

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Inverted and regular impact creasing in the same pass!
    • Up to 10 impact creases per sheet.
    • Up to 20 jobs can be stored into memory.
    • Easy-to-use programming. Set up in minutes!
    Part #: CreaseMasterPLTNM

    $24775.00

  16. Royal Sovereign Rollover Classic 55" x 236" Flatbed Applicator for Mounting and Laminating (10614) - $24821

    • Key Features:
    • Ideal for rigid panel application and laminating digital prints.
    • Substrates up to 3.5 inches can be handled for perfectly flat applications without bubbles or creases.
    • Applying digital prints and other self-adhesive applications on rigid panels such as composite board, acrylic, aluminum etc., is just one of the areas where Rollover Classic reveals its excellent properties in results and operations.
    • Being able to comfortably operate the laminator with one hand while having free access to roller, media and tabletop, results in smooth and effective handling.
    Part #: 10614

    $24821.00

  17. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494) - $24999

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494

    $24999.00

  18. James Burn CB30QS 12" Automatic Coil Inserter and Crimper (04JBCB30QS) - $24999

    • Setup is quick and no tools are required for basic setup and operation.
    • So easy to use that it automatically inserts pre-cut coil lengths into pre-punched books and simultaneously crimps both ends in a single operation.
    • Comes with 8 to 20mm Crimper Head
    • Production speeds up to 600 books per hour.
    • Comes standard as .2475 pitch and requires a 5 x 4mm oval punch die. (Optional 3:1 pitch available which requires a 6.5 x 5.5 mm oval punch dies for 22mm to 30mm size coil.)
    Part #: 04JBCB30QS

    $24999.00

  19. Graphic Whizard Wizard PT375 AKF+ Automatic Creaser/Folder (PT375+AKF) - $25185

    • Electrical: 220-240V 50/60Hz, 20A
    • Speed: 2250 sph (based on 8.5" x 11" run landscape, 1 crease)
    • Maximum stock size: 14.5" x 25.5" (36.8cm x 64.75cm)
    • Minimum stock size: 4.75" x 3.25" (12.06cm x 8.25cm)
    • Stock weight: 26# bond - 16 pt
    Part #: PT375+AKF

    $25185.00

  20. Formax FD 282 Double-Head Edge Tabber with Heavy Duty Feeder (FD 282HF) - $25495

    • Revolutionary design applies tabs to opposite sides of the mailpiece, simultaneously.
    • Tabs up to 25,000 pieces per hour (single tab).
    • Central control panel with LCD display.
    • Program up to 4 custom jobs.
    • Designed to handle a variety of tab stock including translucent and paper.
    Part #: FD 282HF

    $25495.00

  21. Formax Multi-Function Slitter-Cutter-Creaser (Atlas-TRIO15) - $25500

    • High-Speed Cutting/Slitting: Up to eight 12" x 18" sheets per minute (24-up business cards)
    • High-Speed Creasing: Up to 5,000 letter-size sheets per hour
    • Powerful Feed System: Upper belt tri-suction feeding accurately handles large and heavy stocks
    • 4" Color Touchscreen: Program and make adjustments easily with graphics-based menus and three modes - preset, manual and custom/flex
    • Pre-Set and Programmable Jobs: Up to 150 custom jobs can be saved for quick recall
    Part #: Atlas-TRIO15

    $25500.00

  22. Graphic Whizard PT375 CKF Automatic Creaser/Folder (PT375CKF) - $25695

    • Auto sheet measure.
    • Auto setup.
    • Air fed suction feeder.
    • Interchangeable crease/cross-perf dies.
    • Linear rotary and cross perf Impact in a single pass.
    Part #: PT375CKF

    $25695.00

  23. Paitec High Volume Inline Pressure Sealer (IM17100) - $25995

    • Easy & Friendly User Interface.
    • Auto Start And Auto Stop Functionality.
    • Adjustable Alignment To Printer Output.
    • Double Feed Detection.
    • Optical Sensor Halts Feeding Process If Double Feed Is Detected.
    Part #: IM17100

    $25995.00

  24. Formax High Volume Industrial Burster with Imprinter (FD 680) - $25995

    • Paper weight: up to 104 lb card stock, up to 8 parts
    • Speed: Variable, 30 -500 feet per minute
    • Form Size: 2.75" -19"W x 2.75" -17"L (slitting) 2.75" -16.75"W x 2.75" ? 17"L (non-Slitting)
    • Dimensions: 58" L x 41" W x 56.5" H with cabinet
    • Weight: 428 lbs
    Part #: FD 680

    $25995.00

  25. Graphtec 68.5" x 36" Flatbed Vinyl Cutter and Plotter (FCX2000-180VC) - $26000

    • Stronger Media Hold Down. Distance between the holes has been improved from 30 mm on FC2250 Series to 20 mm on FCX2000 Series, as a result, FCX2000 Series provides stronger suction power to hold heavier and thicker medias down.
    • Improved Vacuum Suction! holds media with the use of external electric vacuum pump. This is the preferred method for heavier and thicker media. The Redesigned Cutting Table has increased hold-down capability by its increased number of vacuum holes. This redesign is significantly valuable when cutting smaller objects that have less of surface area.
    • Dual tool holder with 500 gf on tool 1 and 1,000 gf on tool 2
    • Provided tools suitable for many applications.
    • The FCX2000 series has 2 tool holder in the carriage.
    Part #: FCX2000-180VC

    $26000.00

  26. Spiel Sterling Wiremaster Semi-Automatic Double Loop Wire Binding Machine (WM-SEMI) - $26340

    • Economical solution for wire binding.
    • Capable of binding books at the brisk pace of 1,200 per hour.
    • It changes over in about five minutes.
    • The operator hangs the book on the wire and the Wiremaster Semi delivers the book to the closing station, and then to the delivery conveyor.
    • Can bind up to 4 skips.
    Part #: WM-SEMI

    $26340.00

  27. Count AccuCreaser Air Modular Digital Creasing Machine w/ KF200 Knife Folder (ACTREG/KF200) - $26455

    • Count AccuCreaser Details:
    • Provides modes for creasing, perforating or feeding.
    • Bottom vacuum feed with sheet spacing control.
    • CAM actuated compression creasing ensures maximum crease accuracy.
    • Automated distance recognition allows auto setups for your most common creases and corresponding folds, including perfect bind.
    Part #: ACTREG/KF200

    $26455.00

  28. Vivid Matrix 13" Pneumatic Single Sided Roll Laminator (MX-370P) - $26495

    • Pneumatic pressure.
    • Retrofits to existing models.
    • Easy-to-use control panel.
    • Anti-curl technology.
    • Semi-automatic feed.
    Part #: MX-370P

    $26495.00

  29. Formax 6406 Series Mid-Volume Inserter and Folder (FD-6406) - $26495

    • Full-Color Touchscreen: 7" touchscreen display features graphic icons for simple, intuitive use.
    • Modular Flexibility: Configurations are available with 2-6 fully-automatic feed stations.
    • AutoSetTM: Load envelopes and documents and the 6406 Series will adjust all settings automatically.
    • Paper & Envelope Presence Sensors: Control panel displays which feeders need to be refilled.
    • Mid-Volume Processing Speed: Processes up to 4,000 envelopes per hour.
    Part #: FD-6406

    $26495.00

  30. Royal Sovereign 65" Calender Heat Transfer System W/ 10" Infra-Red Quartz Drum and Work Table (PX-180) - $26499

    • Extra-long infra-red quartz heated drum to ensure complete heat distribution and coverage.
    • Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
    • Universal core adapters and shaft-less unwinding technology.
    • Easy to reach front and rear facing emergency stops.
    • Emergency Reverse.
    Part #: PX-180

    $26499.00

Items 1-15 of 22

Display Type List Grid
Page:   1   100   200   300   400   500   600   700   800   990   1,000   1,010   1,020   1,030   1,040   1,050   1,060   1,070   1,071   1,072   1,073   1,074   1,075   1,076   1,077   1,078   1,079   1,080   1,081   1,082   1,083   1,084   1,085   1,086   1,087   1,088   1,089   1,090   1,091   1,092   1,093   1,094   1,095   1,096   1,097   1,098   1,099   1,100