Need Help 1-800-944-4573 1-800-944-4573

Product listing: MBM Triumph Cabinet for 4205, 4215, 4250, 4300, 4305, 4315, and 4350 Cutters (MB0461)   to   17-7/8" x 24-5/8" Crystal Clear Adhesive Vinyl Pockets 100pk (STB-176)

  1. MBM Triumph Cabinet for 4205, 4215, 4250, 4300, 4305, 4315, and 4350 Cutters

    Part number: MB0461

    • Compatible Cutters: MBM Triumph 4205 4215 and 4250 Cutters Part Number: MB-0461

    Your Price: $599.00

  2. Fletcher-Terry Titan 60" Board Cutter Stand - Fletcher Terry

    Part number: Titan60Stand

    • Material waste catcher to keep your shop clean.
    • Locking wheels for easy mobility.
    • Fits the Fletcher-Terry Titan 60" Board Cutter.
    • Squaring arm to keep your materials square and secure.

    Your Price: $599.00

  3. Akiles Electric Coil Binding System

    Part number: AlphaCoil-E

    • Punching Operation Electric Foot Pedal/ Manual Button
    • Inserting Operation Electric Foot Pedal
    • Punching Capacity Up to 20 sheets of 20Lb paper
    • Hole Size Round (4mm)

    List Price: $999.00

    Your Price: $599.00

    You Save: 40%

  4. Akiles Diamond 6 or 7 Knife 5/8" Radius Thick Blade Only - Corner Rounders

    Part number: AD6-7-K16-1

    • Product Type: Akiles Knife Thick Blade
    • Knife Radius: 5/8"
    • Cutting Capacity: 2" of material
    • Compatibility: Akiles Diamond 6 or 7 Corner Rounder

    Your Price: $599.30

  5. Akiles Diamond 6 or 7 Knife 3/8" Radius Thick Blade Only - Corner Rounders

    Part number: AKAD6/7-K10-1

    • Product Type: Akiles Knife Thick Blade
    • Knife Radius: 3/8"
    • Cutting Capacity: 2" of material
    • Compatibility: Akiles Diamond 6 or 7 Corner Rounder

    List Price: $600.00

    Your Price: $599.30

    You Save: 0%

  6. Akiles Diamond 6 or 7 Knife 1/8" Radius Thick Blade Only - Corner Rounders

    Part number: AKAD6/7-K3.5-1

    • Product Type: Akiles Knife Thick Blade
    • Knife Radius: 1/8"
    • Cutting Capacity: 2" of material
    • Compatibility: Akiles Diamond 6 or 7 Corner Rounder

    List Price: $600.00

    Your Price: $599.30

    You Save: 0%

  7. Akiles Diamond 6 or 7 Knife 1/4" Radius Thick Blade Only - Corner Rounders

    Part number: AKAD6/7-K6-1

    • Product Type: Akiles Knife Thick Blade
    • Knife Radius: 1/4"
    • Cutting Capacity: 2" of material
    • Compatibility: Akiles Diamond 6 or 7 Corner Rounder

    List Price: $600.00

    Your Price: $599.30

    You Save: 0%

  8. Akiles Diamond 6 or 7 Knife 1/2" Radius Thick Blade Only - Corner Rounders

    Part number: AKAD6/7-K13-1

    • Product Type: Akiles Knife Thick Blade
    • Knife Radius: 1/2"
    • Cutting Capacity: 2" of material
    • Compatibility: Akiles Diamond 6 or 7 Corner Rounder

    List Price: $600.00

    Your Price: $599.30

    You Save: 0%

  9. Akiles Diamond 6 or 7 Large Work Desk - Corner Rounders

    Part number: AKAD6/7WD

    • Product Type: Akiles Large Work Desk
    • Dimensions: 20" x 11-3/4" (500 x 300mm)
    • Compatibility: Akiles Diamond 6 or 7 Model Corner Rounders
    • Part Number: AKAD6/7-WD

    Your Price: $600.00

  10. Drytac Protac Polycarbonate UV 10.0mil 51" x 75' PS Overlaminate - Pressure Sensitive

    Part number: PPC51075-10

    • Film Width: 51"
    • Film Length: 75'
    • Film Thickness: 10.0mil
    • Core Size: 3"

    List Price: $857.92

    Your Price: $600.54

    You Save: 30%

  11. 5mil Matte Low Melt Laminating Film - 25" x 1000'

    Part number: CBD5M251000-3

    • Film Type: Premium Low Melt Thickness: 5Mil Roll Width: 25inch Roll Length: 1000feet Film Finish: Matte / Satin Core Size: 3inch Operating Temperature: 220 Degrees Part Number: CBD5M251000-3 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

    Your Price: $601.09

  12. Drytac MHL Gloss 10mil 43" x 250' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD43210

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $860.36

    Your Price: $602.25

    You Save: 30%

  13. 1.7mil Gloss Low Melt Laminating Film - 43" x 3000'

    Part number: CBD17G433000-3

    • Film Type: Premium Low Melt Thickness: 1.7Mil Roll Width: 43inch Roll Length: 3000feet Film Finish: Gloss Core Size: 3inch Operating Temperature: 220 Degrees Part Number: CBD17G433000-3 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

    Your Price: $602.29

  14. Black 1/2" Foam Core 48" x 96" Mounting Boards - 12pk

    Part number: 550391B

    • Board Type: Uncoated Foam Core Mounting Boards Board Thickness: 1/2inch Board Size: 48inchx96inch Board Color: Black Quantity: 24 Per Box Part Number: 550391B

    Your Price: $604.19

  15. GBC Octiva Heat Set 2mil Lustre 51" x 150' - GBC

    Part number: 9300709

    • Film Type: GBC Octiva Lo-Melt Heat Set Thickness: 2mil Roll Width: 51inch Roll Length: 150feet Film Finish: Lustre Core Size: 3inch GBC Part Number: 9300709 , G9300709

    List Price: $695.06

    Your Price: $604.49

    You Save: 13%

  16. Black 3/16" Foam Core 48" x 96" Mounting Boards - 25pk

    Part number: 550440

    • Board Type: Uncoated Foam Core Mounting Boards Board Thickness: 3/16inch Board Size: 48inchx96inch Board Color: Black Quantity: 50 Per Box Part Number: 550440

    Your Price: $605.69

  17. Drytac MHL Frost UV 6mil 38" x 250' Low Temp Laminating Film - Low Melt

    Part number: MZ38206

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $867.19

    Your Price: $607.03

    You Save: 30%

  18. HSM Securio B24c Level P-5 Micro-cut 11-13 Sheet Shredder - Security Level

    Part number: HSM1782

    • Order number: HSM1782 EAN Code: 4026631028141 Shredder material: Paper, Paper Clip, and Credit/Store Cards Cutting type: Cross Cut Security level (DIN 66399): P-5 / T-5 / E-4/ F-2 Security level (DIN 32757-1): 4 Cutting width: 1/16 in Particle length: 9/16 in Intake width: 9.5 in Container volume: 9 gal Cutting capacity: 11 - 13sheets Noise level (idle operation): 55-58 dB Power consumption of the motor: 500 W Voltage: 120 V Frequency: 60 Hz Depth: 15.5 in Width: 12.5 in Height: 23.8 in Weight: 45lb Colour: white Driving power: 0.67 kW

    List Price: $1,995.56

    Your Price: $607.26

    You Save: 69%

  19. Rhin-O-Tuff Comb Die Set For OD4012 - Modular Punch Diesets

    Part number: 04235A

    • Plastic Comb Die
    • 9/16" Hole Spacing
    • .125 x .312 Hole Size
    • Rhin-O-Tuff Part Number: 04235A

    Your Price: $607.70

  20. Rhin-O-Tuff 3:1 Square Die Set For OD4012 - Modular Punch Diesets

    Part number: 74231A

    • 3:1 Square Hole Die
    • .333 Hole Spacing
    • .156 Hole Size
    • Rhin-O-Tuff Part Number: 74231A

    Your Price: $607.70

  21. Rhin-O-Tuff 3:1 Square Die Set For OD4000 and OD4800 - Modular Punch Diesets

    Part number: 04231A

    • 3:1 Pitch Square Hole Die
    • .333 Hole Spacing
    • .156 Square Hole Size
    • Rhin-O-Tuff Part Number: 04231a

    Your Price: $607.70

  22. Rhin-O-Tuff 2:1 Square Die Set For OD4012 - Modular Punch Diesets

    Part number: 74221A

    • 2:1 Square Hole Die
    • .500 Hole Spacing
    • .250 Hole Size
    • Rhin-O-Tuff Part Number: 74221A

    Your Price: $607.70

  23. Rhin-O-Tuff 2:1 Square Die Set For OD4000 and OD4800 - Modular Punch Diesets

    Part number: 04221A

    • 2:1 Pitch Square Hole Die
    • .500 Hole Spacing
    • .250 Square Hole Size
    • Rhin-O-Tuff Part Number: 04221a

    Your Price: $607.70

  24. Rhin-O-Tuff 2:1 Rectangle Die Set For OD4000 and OD4800 - Modular Punch Diesets

    Part number: 04226A

    • 2:1 Pitch Rectangle Hole Die
    • .500 Hole Spacing
    • .125 x .250 Hole Size
    • Rhin-O-Tuff Part Number: 04226a

    Your Price: $607.70

  25. Seybold 41" 42" Saber Citation Sixty Replacement Blade

    Part number: JH-48500

    • Compatible Models: Seybold 41inch , 42inch , Saber Citation, Sixty Material: Standard Inlay Holes: 24 Length: 53inch With: 5inch Thickness: 0.495inch Notes: Part Number: JH-48500 , 48500 , KN48500

    Your Price: $609.49

  26. HSM Securio B22c Level P-5 Micro-cut 9-11 Sheet Shredder - HSM1832 - Security Level

    Part number: HSM-1832

    • Order number: HSM1832 EAN Code: 4026631027991 Shredder material: Paper, Paper Clip, and Credit/Store Cards Cutting type: Cross Cut Security level (DIN 66399): P-5 / T-5 / E-4 / F-2 Security level (DIN 32757-1): 4 Cutting width: 1/16 in Particle length: 9/16 in Intake width: 9.4 in Container volume: 8.7 gal Cutting capacity: 9 - 11sheets Noise level (idle operation): 55-58 dB Power consumption of the motor: 440 W Voltage: 120 V Frequency: 60 Hz Depth: 11.3 in Width: 14.8 in Height: 23.1 in Weight: 26.5lb Colour: white Driving power: 0.59 kW

    List Price: $1,711.03

    Your Price: $609.51

    You Save: 64%

  27. HSM Securio B26s Level P2 1/8" Strip Cut Shredder - Cut Type

    Part number: HSM-1800

    • Order Number: HSM1800 EAN Code: 4026631047609 Shredder material: staples, paper clips, credit/store cards, and CDs/DVDs Cutting type: Strip Cut Security Levels DIN 66399: P-2 / 0-2 / T-2 / E-2 Security level (DIN 32757-1): 2 Cutting width: 1/8 in Intake width: 11 in Container volume: 14.5 gal Cutting capacity: 22-24sheets Noise level (idle operation): 55-58 dB Power consumption of the motor: 500 W Voltage: 115 V Frequency: 60 Hz Depth: 15.5 in Width: 19.6 in Height: 26.6 in Weight: 53.4lb Color: White Driving power: 0.67 kW

    List Price: $1,218.90

    Your Price: $610.10

    You Save: 49%

  28. 10mil Gloss Low Melt Laminating Film - 38" x 500'

    Part number: CBD10G38500-3

    • Film Type: Premium Low Melt Thickness: 10Mil Roll Width: 38inch Roll Length: 500feet Film Finish: Gloss Core Size: 3inch Operating Temperature: 220 Degrees Part Number: CBD10G38500-3 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

    Your Price: $611.19

  29. Keencut 104" Simplex Sheet Material Cutter - Foster

    Part number: 60458

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.

    List Price: $680.00

    Your Price: $612.00

    You Save: 10%

  30. 17-7/8" x 24-5/8" Crystal Clear Adhesive Vinyl Pockets 100pk

    Part number: STB-176

    • Pocket Material: High Quality Crystal Clear Vinyl Pocket Thickness: 8 ga. Adhesive Type: Permanent (Sticks To Almost Any Flat Surface) Opens On: Short Side With 1/4inch Lip Inside Dimensions: 17-7/8inchx24-5/8inch Outside Dimensions: 18-1/4inchx25inch Opening: 17-7/8inch Quantity: 100pk Part Number: STB-176

    Your Price: $612.19

Page:   1   180   190   200   210   220   230   240   250   260   270   271   272   273   274   275   276   277   278   279   280   281   282   283   284   285   286   287   288   289   290   291   292   293   294   295   296   297   298   299   300   309