Product listing: Fletcher-Terry FSC Wheel Bearings - 1 Set (05-226) to Style K Imperial/Lihit Standard Drill Bit (MYDB-K)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Fletcher-Terry FSC Wheel Bearings - 1 Set (05-226)

    • Type: Wheel Bearings
    • For Use With: FSC FSC Substrate Cutter's aluminum sheet and composite wheel holders
    • Quantity: 1 Set
    • Part Number: 05-226
    • Type: Wheel Bearings
    Part #: 05-226

    $59.43

  2. Fletcher-Terry FSC V-Groove Replacement Blades - 1 Set (05-233)

    • Type: V-Groove Replacement Blades
    • For Use With: Fletcher FSC Substrate Cutter and V-Groove Blade Holder (04-779)
    • Quantity: Includes 2 blades, 2 screws, and 1 wrench.
    • Part Number: 05-233
    • Type: V-Groove Replacement Blades
    Part #: 05-233

    $132.80

  3. Logan Air-Matic Dual Drive Point Driver (F500-4)

    • Designed to quickly drive either rigid or flexible points pneumatically using a common air compressor at 52 psi.
    • Used in picture framing for securing glazing, mounted art and backing material into wood frame moulding.
    • Fast repeat firing for high production framing.
    • Approximately 300 point magazine capacity.
    • Includes 100 rigid points and 100 flex points
    Part #: F500-4

    $107.85

  4. Rapid 49 Heavy Duty All-Steel 170-Sheet Stapler (RAPID49)

    • Staples up to 170 sheets of paper.
    • Steel frame construction.
    • Built-in staple crown support that assures no bent staples or deformed crowns.
    • Uses staple sizes from 5/16" to 3/4".
    • Adjustable throat depth to 2 3/4".
    Part #: RAPID49

    $96.49

  5. Rapid 9 Heavy Duty 100-Sheet Stapler (Rapid9)

    • A rugged and durable heavy duty stapler.
    • Adjustable throat depth up to 3 1/2".
    • Easy staple back load system.
    • Will staple up to 100 sheets 20 lb. bond.
    • Uses Rapid Staples 9-8, 9-10, 9-12, and 9-14.
    Part #: Rapid9

    $38.63

  6. Book Clamps for Booklet Trimming - 2/Set (MYBC)

    • Cut books quickly, safely and professionally
    • Made of solid cast brass, the clamps safely hold down the folded or stitched side of booklets, pamphlets or catalogs while being trimmed in the paper cutter.
    • Eliminate the common and dangerous practice of holding them down manually.
    • Quantity: 2/Set
    • Cut books quickly, safely and professionally
    Part #: MYBC

    $34.90

  7. Laminator Roller Cleaning Bar (1-1/2" x 4") (MYLCB)

    • A light abrasive bar that will not damage rollers.
    • Ideal for removing built up adhesives on laminator rollers.
    • Size: 1-1/2" x 4".
    • Quantity: 1pk
    • A light abrasive bar that will not damage rollers.
    Part #: MYLCB

    $12.99

  8. Hollow Drill Chip Remover (MYCR)

    • Use to remove paper chips from hollow drills.
    • Just place under the drill bit and manually bring down drill head.
    • Works on sizes from 3/16" to 1/2".
    • Quantity: 1pk
    • Use to remove paper chips from hollow drills.
    Part #: MYCR

    $24.69

  9. Quik-Pik-R Sheet Picker Finger Counter Ring (MYFCR)

    • Convenient, efficient, and simple tool that helps you count and separate our stacks of paper into designated stack thicknesses.
    • Just set the depth by rotating the screw, slide the device onto your ring finger (or any finger you prefer), and run it over your stack.
    • Separator base will easily glide between sheets without damaging them, allowing you to grab the pre-determined stack easily.
    • Ppaper counting ring can greatly increase speed and productivity, while eliminating headaches and hassle with hand-counting stacks.
    • Accurate counter and sheet separating tool ensures your binding punch is not overloaded or working below it's potential by ensuring the proper number of sheets are inserted for each punch.
    Part #: MYFCR

    $29.95

  10. 5" Squeegee for Window Clings and Decals - 10/Pk (MYSQU)

    • Product Type: Laminating Accessory
    • Size: 5"
    • For Use With: window film, paint protection film, decals, auto wrap materials
    • Quantity: 10/Pk
    • Product Type: Laminating Accessory
    Part #: MYSQU

    $19.80

  11. 1/8" Style E Uchida Standard Drill Bit (DB-E1-8)

    • Size (Diameter): 1/8"
    • Drill Capacity: : 1.5" (40mm)
    • Style: "E"
    • Designed For: European style drill including Uchida, MBM, Standard Citoborma and Corta
    • Size (Diameter): 1/8"
    Part #: DB-E1-8

    $25.19

  12. 1/4" Style E Uchida Standard Drill Bit (DB-E1-4)

    • Size (Diameter): 1/4"
    • Drill Capacity:: 2" (50mm)
    • Style: "E"
    • Designed For: European style drill including Uchida, MBM, Standard Citoborma and Corta
    • Size (Diameter): 1/4"
    Part #: DB-E1-4

    $25.19

  13. 5/16" Style E Uchida Standard Drill Bit (DB-E5-16)

    • Size (Diameter): 5/16"
    • Drill Capacity: Drill Capacity: 2" (50mm)
    • Style: "E"
    • Designed For: European style drill including Uchida, MBM, Standard Citoborma and Corta
    • Size (Diameter): 5/16"
    Part #: DB-E5-16

    $25.19

  14. 3/8" Style E Uchida Standard Drill Bit (DB-E3-8)

    • Size (Diameter): 3/8"
    • Drill Capacity: 2" (50mm)
    • Style: "E"
    • Designed For: European style drill including Uchida, MBM, Standard Citoborma and Corta
    • Size (Diameter): 3/8"
    Part #: DB-E3-8

    $25.19

  15. Style E Uchida Standard Drill Bit (MYDB-E)

    • Size (Diameter): Choose Above
    • Drill Capacity: 1.5" (40mm) or 2" (50mm)
    • Style: "E"
    • Designed For: European style drill including Uchida, MBM, Standard Citoborma and Corta
    • Available in 4 Different Sizes
    Part #: MYDB-E

    $25.19

  16. 1/4" Style B Lawson Standard Drill Bit (DB-B1-4)

    • Size (Diameter): 1/4"
    • For Use With: Lawson Paper Drill
    • Style: "B"
    • Drill Bits Capacity: 2 1/4"
    • Size (Diameter): 1/4"
    Part #: DB-B1-4

    $26.79

  17. 5/16" Style B Lawson Standard Drill Bit (DB-B5-16)

    • Size (Diameter): 5/16"
    • For Use With: Lawson Paper Drill
    • Style: "B"
    • Drill Bits Capacity: 2-1/4"
    • Size (Diameter): 5/16"
    Part #: DB-B5-16

    $24.95

  18. Style B Lawson Standard Drill Bit (MYDB-B)

    • Size (Diameter): Choose Above
    • For Use With: Lawson Paper Drill
    • Style: "B"
    • Drill Bits Capacity: 2 1/4"
    • Available in 2 Different Sizes
    Part #: MYDB-B

    $24.95

  19. 1/8" Style C Baum/Nygren Dahly Standard Drill Bit (DB-C1-8)

    • Size (Diameter): 1/8"
    • For Use With: Baum/Nygren Dahly paper drills
    • Style: "C"
    • Drill Bits Capacity: 2"
    • Size (Diameter): 1/8"
    Part #: DB-C1-8

    $26.79

  20. 5/32" Style C Baum/Nygren Dahly Standard Drill Bit (DB-C5-32)

    • Size (Diameter): 5/32"
    • For Use With: Baum/Nygren Dahly Paper Drills
    • Style: "C"
    • Drill Bits Capacity: 2"
    • Size (Diameter): 5/32"
    Part #: DB-C5-32

    $26.79

  21. 1/4" Style C Baum/Nygren Dahly Standard Drill Bit (DB-C1-4)

    • Size (Diameter): 1/4"
    • For Use With: : Baum/Nygren Dahly Paper Drills
    • Style: "C"
    • Drill Bits Capacity: 2"
    • Size (Diameter): 1/4"
    Part #: DB-C1-4

    $26.79

  22. 5/16" Style C Baum/Nygren Dahly Standard Drill Bit (DB-C5-16)

    • Size (Diameter): 5/16"
    • For Use With: Baum/Nygren Dahly Paper Drills
    • Style: "C"
    • Drill Bits Capacity: 2"
    • Size (Diameter): 5/16"
    Part #: DB-C5-16

    $26.79

  23. 3/8" Style C Baum/Nygren Dahly Standard Drill Bit (DB-C3-8)

    • Size (Diameter): 3/8"
    • For Use With: Baum/Nygren Dahly Paper Drills
    • Style: "C"
    • Drill Bits Capacity: 2"
    • Size (Diameter): 3/8"
    Part #: DB-C3-8

    $26.79

  24. 1/2" Style C Baum/Nygren Dahly Standard Drill Bit (DB-C1-2)

    • Size (Diameter): 1/2"
    • For Use Wth: Baum/Nygren Dahly Paper Drills
    • Style: "C"
    • Drill Bits Capacity: 2"
    • Size (Diameter): 1/2"
    Part #: DB-C1-2

    $26.79

  25. Style C Baum/Nygren Dahly Standard Drill Bit (MYDB-C)

    • Size (Diameter): Choose Above
    • For Use With: Baum/Nygren Dahly Paper Drills
    • Style: "C"
    • Drill Bits Capacity: 2"
    • Available in 7 Different Sizes
    Part #: MYDB-C

    $26.79

  26. 1/8" Style K Imperial/Lihit Standard Drill Bit (DB-K1-8)

    • Size (Diameter): 1/8"
    • For Use With: Martin Yale 202, Imperial, and Lihit Paper Drills
    • Style: "K"
    • Drill Bit Capacity: 2"
    • Size (Diameter): 1/8"
    Part #: DB-K1-8

    $26.79

  27. 3/16" Style K Imperial/Lihit Standard Drill Bit (DB-K3-16)

    • Size (Diameter): 3/16"
    • For Use With: Martin Yale 202, Imperial, and Lihit Paper Drills
    • Style: "K"
    • Drill Bit Capacity: 2"
    • Size (Diameter): 3/16"
    Part #: DB-K3-16

    $26.79

  28. 1/4" Style K Imperial/Lihit Standard Drill Bit (DB-K1-4)

    • Size (Diameter): 1/4"
    • For Use With: Martin Yale 202, Imperial, and Lihit Paper Drills
    • Style: "K"
    • Drill Bit Capacity: 2"
    • Size (Diameter): 1/4"
    Part #: DB-K1-4

    $26.79

  29. 5/16" Style K Imperial/Lihit Standard Drill Bit (B-K5-16)

    • Size (Diameter): 5/16"
    • For Use With: Martin Yale 202, Imperial, and Lihit Paper Drills
    • Style: "K"
    • Drill Bit Capacity: 2"
    • Size (Diameter): 5/16"
    Part #: B-K5-16

    $26.79

  30. Style K Imperial/Lihit Standard Drill Bit (MYDB-K)

    • Size (Diameter): Choose Above
    • Bit Description: Standard
    • Style: "K"
    • Drill Bits Capacity: 2"
    • Available in 4 Different Sizes
    Part #: MYDB-K

    $26.79

Items 1-15 of 22

Display Type List Grid
Page:   1   100   200   300   400   500   600   700   800   920   930   940   950   960   970   980   990   1,000   1,009   1,010   1,011   1,012   1,013   1,014   1,015   1,016   1,017   1,018   1,019   1,020   1,021   1,022   1,023   1,024   1,025   1,026   1,027   1,028   1,029   1,030   1,031   1,032   1,033   1,034   1,035   1,036   1,037   1,038   1,040   1,050   1,060   1,070   1,080   1,090   1,091