Product listing: Lassco Wizer Plastic Pile Separator (W179) to Count Standard 5-1 18 Teeth Perf Blade (CSTANDBLADE18)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Lassco Wizer Plastic Pile Separator (W179)

    • 6" long, 3/4" wide, 1-3/8" high
    • Longer taper than wooden wedges
    • Permits closer adjustment
    • Prevents messes, dripping, and folding under
    • Part Number is W179
    Part #: W179

    $7.50

  2. Lassco Wizer Numbering Head - Gothic Type (W100A)

    • Gothic Type
    • Six wheel numbering head
    • Number from 1 to 999999
    • Sinkable zeros
    • Forward action
    Part #: W100A

    $149.54

  3. Lassco Wizer Numbering Head - Roman Type (W100B)

    • Roman Type
    • Six wheel numbering head
    • Number from 1 to 999999
    • Sinkable zeros
    • Forward action
    Part #: W100B

    $154.10

  4. Lassco Wizer 2" Right Angle Push Blocks for Cornerrounders (CR55-PB)

    • Right angle 90° block for use with up to 2" stacks
    • Designed to assist with the corner cutting of smaller products like business cards
    • Prevents the product from slipping or being pushed out while cutting
    • Helps to maintain a properly squared stack
    • Part Number is CR55-PB
    Part #: CR55-PB

    $14.60

  5. Spinnit FMMH 2.1 2-Spindle Hydraulic Lift Paper Drill (FMMH-2.1)

    • With two moveable heads
    • Two spindles with a 2-1/2" drilling capacity
    • Powerful hydraulic lift with foot pedal activation
    • Sturdy adjustable back-gauge
    • Easy to adjust moveable head design
    Part #: FMMH-2.1

    $5174.12

  6. Spinnit 2-Spindle Hydraulic Lift Paper Drill (FMMH-2.1C)

    • Designed specifically for Casino’s to cancel decks of cards.
    • Has a fixed drawer system which allows easy drilling of six decks of cards at one time.
    • Two spindles with a 2-1/2" drilling capacity
    • Powerful hydraulic lift with foot pedal activation
    • Sturdy adjustable back-gauge
    Part #: FMMH-2.1C

    $6878.57

  7. Spinnit 2-Spindle Hydraulic Lift Paper Drill (FMMH-2)

    • With two moveable heads
    • Two spindles with a 2" drilling capacity
    • Powerful hydraulic lift with foot pedal activation
    • Sturdy adjustable back-gauge
    • Easy to adjust moveable head design
    Part #: FMMH-2

    $5615.00

  8. Lassco Wizer 1/4" Red Streak Staples - 5000/Box (LW-W102)

    • Staples work with Rapid 106 and Rapid 101 Stapler Booklet Makers.
    • Chisel point for optimal performance.
    • Staple Size: 1/4"
    • Quantity: 1 Box (5,000 staples per box)
    • Part Number: LW-W102
    Part #: LW-W102

    $7.09

  9. Lassco Wizer 5/16" Premium Staples - 5000/Box (LW-W105)

    • Staples work with Rapid 106 and Rapid 101 Stapler Booklet Makers.
    • Chisel point for optimal performance.
    • Staple Size: 5/16"
    • Quantity: 1 Box (5,000 staples per box)
    • Part Number: LW-W105
    Part #: LW-W105

    $5.89

  10. Lassco Wizer 6-5/8" x 1-1/4" x 5/16' Paper Drill Block - 36pk (HL3G06)

    • Fits Spinnit and Challenge Paper Drill machines.
    • Made of solid hard wood.
    • Size: 6-5/8" x 1-1/4" x 5/16'
    • Quantity: 36pk (3 dz)
    • Part Number: HL3G06
    Part #: HL3G06

    $28.19

  11. Lassco Wizer Lube and Clean for Numbering Heads (W100L)

    • Clean and lubricate the numbering heads in one easy step: Simply brush on and wipe away the excess ink.
    • Don't wait until your machine becomes clogged; use it after each job to ensure crisp clean numbering and extend the life of your numbering head.
    • Good for use on Lassco Wizer numbering machines along with Count Machinery, Graphic Wizard and all other brands of metal numbering machines.
    • Lassco Wizer Lube and Clean is sold in one quart containers.
    • Clean and lubricate the numbering heads in one easy step: Simply brush on and wipe away the excess ink.
    Part #: W100L

    $28.61

  12. Lassco Wizer Black Metal Numbering Ink - 1oz (W100C)

    • Type: Numbering Ink
    • Compatible Model/s: Lassco Wizer W200 Number All and W100-3 Number Rite
    • Color: Black
    • Quantity: 1 oz. bottle
    • Part Number: W100-C
    Part #: W100C

    $7.01

  13. Lassco Wizer Red Metal Numbering Ink - 1oz (W100D)

    • Type: Numbering Ink
    • Compatible Model/s: Lassco Wizer W200 Number All and W100-3 Number Rite
    • Color: Red
    • Quantity: 1 oz. bottle
    • Part Number: W100-D
    Part #: W100D

    $7.01

  14. Lassco Wizer Blue Metal Numbering Ink - 1oz (W100D2)

    • Type: Numbering Ink
    • Compatible Model/s: Lassco Wizer W200 Number All and W100-3 Number Rite
    • Color: Blue
    • Quantity: 1 oz. bottle
    • Part Number: W100-D2
    Part #: W100D2

    $6.00

  15. Lassco Wizer Paper Drill Sharpening Stone (EBM-41)

    • Type: Sharpening Stone
    • Dimension (L x W x H): 3" x 1" x .50"
    • Part Number: EBM-41
    • Type: Sharpening Stone
    • Removes and smoothes drill burrs
    Part #: EBM-41

    $7.60

  16. Lassco Wizer Skrebba Heavy Duty Flat and Saddle Stapler (W115)

    • Flat and saddle stapler
    • Binds up to 55 sheets at a time
    • Manual with lever action
    • Easy to use clamp for mounting on any desk or bench
    • Part Number: W115
    Part #: W115

    $202.21

  17. Lassco Wizer 1/8" Corner Rounder Blade for CR-55 Cutter (CR55-18)

    • Type: Corner Rounder Blade
    • Compatible Model/s: Lassco Wizer CR-55 Manual Corner Cutter
    • Size: 1/8"
    • Part Number: CR55-18
    • Type: Corner Rounder Blade
    Part #: CR55-18

    $187.97

  18. Lassco Wizer 1/4" Corner Rounder Blade for CR-55 Cutter (CR55-14)

    • Type: Corner Rounder Blade
    • Compatible Model/s: Lassco Wizer CR-55 Manual Corner Cutter
    • Size: 1/4"
    • Part Number: CR55-14
    • Type: Corner Rounder Blade
    Part #: CR55-14

    $190.00

  19. Lassco Wizer 3/8"Corner Rounder Blade for CR-55 Cutter (CR55-38)

    • Type: Corner Rounder Blade
    • Compatible Model/s: Lassco Wizer CR-55 Manual Corner Cutter
    • Size: 3/8"
    • Part Number: CR55-38
    • Type: Corner Rounder Blade
    Part #: CR55-38

    $190.00

  20. Lassco Wizer 1/2"Corner Rounder Blade for CR-55 Cutter (CR55-12)

    • Type: Corner Rounder Blade
    • Compatible Model/s: Lassco Wizer CR-55 Manual Corner Cutter
    • Size: 1/2"
    • Part Number: CR55-12
    • Type: Corner Rounder Blade
    Part #: CR55-12

    $190.00

  21. Lassco Wizer Numbering Ink Pads - 12pk (W100F)

    • Type: Numbering Ink Pads
    • Compatible Model/s: W200 Number All and W100-3 Number Rite
    • Quantity: 12 Numbering Ink Pads
    • Size: 1/4" thick + 7/17" x 1-1/8"
    • Part Number: W100-F
    Part #: W100F

    $10.60

  22. Lassco Wizer Green Numbering Strike Pad (W100G)

    • Type: Numbering Strike Pad
    • Color: Green
    • Material : Rubber with Sticky Back
    • Compatible Model/s: W100-3 Number Rite
    • Quantity: 1 Numbering Strike Pad
    Part #: W100G

    $5.77

  23. Lassco Wizer Numbering Ink Pad Clip (W100E)

    • Type: Numbering Ink Pad Clip
    • Compatible Model/s: W200 Number All, W100-3 Number Rite and More
    • Quantity: 1 Clip
    • Part Number: W100-E
    • Holds the felt ink pad in place for easy re-inking
    Part #: W100E

    $10.60

  24. Lassco Wizer Metal Numbering Ink - 1oz (LW-MNI)

    • Type: Numbering Ink
    • Compatible Model/s: Lassco Wizer W200 Number All and W100-3 Number Rite
    • Color: Black, Blue and Red
    • Quantity: 1 oz. bottle
    • Type: Numbering Ink
    Part #: LW-MNI

    $6.00

  25. Lassco Wizer Numbering Head (LW-NH)

    • Roman or Gothic Type
    • Six wheel numbering head
    • Number from 1 to 999999
    • Sinkable zeros
    • Forward action
    Part #: LW-NH

    $149.54

  26. Lassco Wizer Corner Rounder Blades for CR-55 Cutter (LW-CRB)

    • Type: Corner Rounder Blade
    • Compatible Model: Lassco Wizer CR-55 Manual Corner Cutter
    • Available Sizes: 1/8", 1/4", 3/8" or 1/2"
    • Cutting Capacity: 2"
    • Type: Corner Rounder Blade
    Part #: LW-CRB

    $187.97

  27. Count Friction-Fed Digital Creasing/Perforating/Numbering Machine (FC114)

    • Simple programming allows you to number, perforate or crease individually.
    • Creasing:
    • Rotary-actuated impact creasing.
    • Two-sided creasing die - one side has a narrow crease and the other a wide crease for heavier stock to change, simply remove the die and flip it over.
    • Automated Distance Recognition - allows auto setups for your most common creases and corresponding folds.
    Part #: FC114

    $13015.00

  28. Count FC114 A Air-Fed Digital Creasing/Perforating/Numbering Machine (FC114A)

    • Simple programming allows you to number, perforate or crease individually.
    • Creasing:
    • Rotary-actuated impact creasing.
    • Two-sided creasing die - one side has a narrow crease and the other a wide crease for heavier stock to change, simply remove the die and flip it over.
    • Automated Distance Recognition - allows auto setups for your most common creases and corresponding folds.
    Part #: FC114A

    $17740.00

  29. Count PerfMaster Dash Hand Crank Perforating and Scoring Machine (CPMASTERDASH)

    • Easy-to-use hand crank operation is simple and affordable.
    • Removable receiving tray and magnetic guide rails make for easy mobility and tabletop use.
    • Quickly change from perforating to scoring in seconds.
    • Easily set Perf/Score depth control.
    • 18" wide feed capacity.
    Part #: CPMASTERDASH

    $3513.00

  30. Count Standard 5-1 18 Teeth Perf Blade (CSTANDBLADE18)

    • Type: Perforating Blade
    • Compatible Model/s: All Perforating Machines
    • Teeth: 18
    • Part Number: CSTANDBLADE18
    • Type: Perforating Blade
    Part #: CSTANDBLADE18

    $42.19

Items 1-15 of 22

Display Type List Grid
Page:   1   100   200   300   400   500   610   620   630   640   650   660   670   680   690   697   698   699   700   701   702   703   704   705   706   707   708   709   710   711   712   713   714   715   716   717   718   719   720   721   722   723   724   725   726   730   740   750   760   770   780   790   800   810   900   1,000   1,100   1,102