Product listing: SealerSales Replacement Kit for YC-600HL L-Bar Sealer (RK-24L-YC-600HL) to Fastbind 4" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP4)
-
SealerSales Replacement Kit for YC-600HL L-Bar Sealer (RK-24L-YC-600HL)
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
- For Use With: YC-Series 24" x 32" L-Bar Sealer w/ Film Roller
- Quantity: 1 Set
- Part Number: RK-24L-YC-600HL
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
Part #: RK-24L-YC-600HL -
SealerSales Replacement Kit for W-350L L-Bar Sealer (RK-14L-W-350L)
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
- For Use With: W-Series 14" x 20" L-Bar Sealer w/ Film Roller
- Quantity: 1 Set
- Part Number: RK-14L-W-350L
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
Part #: RK-14L-W-350L -
SealerSales Replacement Kit for W-500L L-Bar Sealer (RK-20L-W-500L)
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
- For Use With: W-Series 20" x 26" L-Bar Sealer w/ Film Roller
- Quantity: 1 Set
- Part Number: RK-20L-W-500L
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
Part #: RK-20L-W-500L -
SealerSales Replacement Kit for W-650L L-Bar Sealer (RK-26L-W-650L)
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
- For Use With: W-Series 26" x 31" L-Bar Sealer w/ Film Roller
- Quantity: 1 Set
- Part Number: RK-26L-W-650L
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
Part #: RK-26L-W-650L -
Logan FoamWerks Cutting Board (W3002)
- A 32” capacity base board
- Mounted aluminum guide rail for guiding FoamWerks tools.
- Squaring bar to hold material at a 90 degree angle.
- 20" fold out measuring bar to speed the sizing of material.
- Using this base board accessory means faster more accurate cuts on foam board and no more use for scrap foam board underlayment.
Part #: W3002 -
Fastbind 1/2" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP.5)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP.5 -
Burgundy Metallic 8" x 100' Laminating / Toner Fusing Foil (RED-41-8)
- Item: RED-41-8
- Color: Burgundy Metallic
- Width: 8"
- Roll Length: 100'
- Core Size: 1/2"
Part #: RED-41-8 -
Burgundy Metallic 12" x 100' Laminating / Toner Fusing Foil (RED-41-12)
- Item: RED-41-12
- Color: Medium Red Metallic
- Width: 12"
- Roll Length: 100'
- Core Size: 1/2"
Part #: RED-41-12 -
Burgundy Metallic 24" x 500' Laminating / Toner Fusing Foil (RED-41-24)
- Item: RED-41-24
- Color: Burgundy Metallic
- Width: 24"
- Roll Length: 500'
- Core Size: 1"
Part #: RED-41-24 -
Burgundy Metallic Laminating / Toner Fusing Foil (MYRED-41)
- Color: Burgundy Metallic
- Width: 8", 12", or 24"
- Roll Length: 100' - 1000'
- Core Size: 1/2" - 1"
- 8", 12", or 24" widths available
Part #: MYRED-41 -
Copper Satin Matte 8" x 100' Laminating / Toner Fusing Foil (SM-COP-40-8)
- Item: SM-COP-40-8
- Color: Copper Satin Matte
- Width: 8"
- Roll Length: 100'
- Core Size: 1/2"
Part #: SM-COP-40-8 -
Copper Satin Matte 12" x 100' Laminating / Toner Fusing Foil (SM-COP-40-12)
- Item: SM-COP-40-12
- Color: Copper Satin Matte
- Width: 12"
- Roll Length: 100'
- Core Size: 1/2"
Part #: SM-COP-40-12 -
Copper Satin Matte 24" x 500' Laminating / Toner Fusing Foil (SM-COP-40-24)
- Item: SM-COP-40-24
- Color: Copper Satin Matte
- Width: 24"
- Roll Length: 500'
- Core Size: 1/2"
Part #: SM-COP-40-24 -
Copper Satin Matte Laminating / Toner Fusing Foil (MYSM-COP-41)
- Color: Copper Satin Matte
- Width: 8", 12", or 24"
- Roll Length: 100' - 1000'
- Core Size: 1/2" - 1"
- 8", 12", or 24" widths available
Part #: MYSM-COP-41 -
Teal Satin Matte 8" x 100' Laminating / Toner Fusing Foil (SM-BLU-35-8)
- Item: SM-BLU-35-8
- Color: Copper Satin Matte
- Width: 8"
- Roll Length: 100'
- Core Size: 1/2"
Part #: SM-BLU-35-8 -
Teal Satin Matte 12" x 100' Laminating / Toner Fusing Foil (SM-BLU-35-12)
- Item: SM-BLU-35-12
- Color: Copper Satin Matte
- Width: 12"
- Roll Length: 100'
- Core Size: 1/2"
Part #: SM-BLU-35-12 -
SealerSales 10" Table-Top Direct Heat Sealer (W-250DATVS)
- Vertical serrated seal lines.
- Consistent seals each time.
- Easy to operate.
- Strong 15mm seal width.
- Protector bars around sealing jaws.
Part #: W-250DATVS -
Teal Satin Matte 24" x 500' Laminating / Toner Fusing Foil (SM-BLU-35-24)
- Item: SM-BLU-35-24
- Color: Copper Satin Matte
- Width: 24"
- Roll Length: 500'
- Core Size: 1/2"
Part #: SM-BLU-35-24 -
Teal Satin Matte Laminating / Toner Fusing Foil (MYSM-BLU-35)
- Color: Teal Satin Matte
- Width: 8", 12", or 24"
- Roll Length: 100' - 1000'
- Core Size: 1/2" - 1"
- 8", 12", or 24" widths available
Part #: MYSM-BLU-35 -
Fuchsia Pink Satin Matte 8" x 100' Laminating / Toner Fusing Foil (SM-PNK-54-8)
- Item: SM-PNK-54-8
- Color: Fuchsia Pink Satin Matte
- Width: 8"
- Roll Length: 100'
- Core Size: 1/2"
Part #: SM-PNK-54-8 -
Fuchsia Pink Satin Matte 12" x 100' Laminating / Toner Fusing Foil (SM-PNK-54-12)
- Item: SM-PNK-54-12
- Color: Fuchsia Pink Satin Matte
- Width: 12"
- Roll Length: 100'
- Core Size: 1/2"
Part #: SM-PNK-54-12 -
Fuchsia Pink Satin Matte 24" x 500' Laminating / Toner Fusing Foil (SM-PNK-54-24)
- Item: SM-PNK-54-24
- Color: Fuchsia Pink Satin Matte
- Width: 24"
- Roll Length: 500'
- Core Size: 1/2"
Part #: SM-PNK-54-24 -
Fuchsia Pink Satin Matte Laminating / Toner Fusing Foil (MYSM-PNK-54)
- Color: Fuchsia Pink Satin Matte
- Width: 8", 12", or 24"
- Roll Length: 100' - 1000'
- Core Size: 1/2" - 1"
- 8", 12", or 24" widths available
Part #: MYSM-PNK-54 -
Fastbind 1" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP1)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP1 -
Fastbind 1.5" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP1.5)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP1.5 -
Fastbind 2" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP2)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP2 -
Fastbind 2.5" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP25)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP25 -
Fastbind 3" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP3)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP3 -
Fastbind 3.5" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP3.5)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP3.5 -
Fastbind 4" Customizable 8.5" x 11" Portrait 3-Ring Binder Kit - 5 Sets (CEBRLP4)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 8.5" x 11" letter portrait blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBRLP4
