Product listing: MBM Triumph 5255 20.375" Electric Programmable Paper Cutter (MBM-CU0490) to MBM Aerocut NanoPLUS Air Feed Paper Slitter and Cutter (CU0439)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. MBM Triumph 5255 20.375" Electric Programmable Paper Cutter (MBM-CU0490)

    • Transparent Safety Guard. A cut can only be executed if the hinged, electronically controlled safety guard is in the closed position.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Easy-To-Use Touchpad The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0490

    $11549.00

  2. Ledco Econocraft 30" Laminator Roll Applicator (2030102U)

    • A scrap rewind with an adjustable clutch takes up the release liner found on many pressure sensitive films.
    • Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
    • The laminating roller opening is adjustable in seconds and allows operators to work with different thickness materials.
    • A variable speed motor control allows operators to apply different materials to different substrates.
    • Interchangeable rubber rollers help keep maintenance costs down.
    Part #: 2030102U

    $11543.00

  3. Royal Sovereign 65" Heat Assist Wide Format Laminator (RSC-6500H)

    • Max laminating width: 65"
    • Max Mounting Gap: 2"
    • Max Laminating Speed: 28ft/min.
    • Speed Control: Yes
    • Transport Type: 2 Rollers
    Part #: RSC-6500H

    $11519.12

  4. Challenge Spartan 185AEP 18.5' Electronic Programmable Cutter (CH-SPARTAN185AEP)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Electric Powered Backgauge: Controlled by the electronic console with handwheel for micro adjustments
    • 3" Lighted LCD Display: Displays backguague location with +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Programmable: Operator friendly software uses soft key menu prompts for easy programming. During a program the 3" LCD displays up to 5 consecutive cuts to aid the operator in navigating a job.
    Part #: CH-SPARTAN185AEP

    $11495.00

  5. Destroyit 4605 High-Capacity Level P-5 Micro-cut Shredder (DSH0263)

    • Fully enclosed, dust-proof gearbox housing
    • Cabinet door opens from front
    • Mobile shred bin for easy repacment of disposable shred bags
    • 61gallon bin capacity
    • Automatic stop when hopper or cabinet door is opened or when shred bag is full
    Part #: DSH0263

    $11439.00

  6. Destroyit MBM 4605 High Capacity Cross Cut Paper Shredder - DSH0269 (MB-4605CC)

    • Fully enclosed, dust-proof gearbox housing
    • Cabinet door opens from front
    • Mobile shred bin for easy repacment of disposable shred bags.
    • 61gallon bin capacity
    • Automatic stop when hopper or cabinet door is opened or when shred bag is full
    Part #: MB-4605CC

    $11439.00

  7. Brackett Padmaster 2000 Tabletop Automated Padding Machine (Padmaster2000)

    • Features:
    • Simple and Speedy Automatic Tabletop Padder.
    • Frees you from messy, time consuming hand padding.
    • Transforms loose sheets into instant pads (or strips of pads).
    • Handles pads-to-be from two sheets thin up to three inches thick and 17 inches long.
    Part #: Padmaster2000

    $11435.00

  8. Intimus FlashEx SSD/Hard Drive/Tablet Digital Media Shredder (176704)

    • Industrial shredder with security level E-3 ensuring safety of sensitive multimedia and digital information.
    • Shreds USB sticks, Smartphones, Tablets, Mobile Phones, SSD's and more.
    • Plug into a standard wall outlet and start shredding, it's that easy. Special power requirements not needed.
    • Specially designed solid cutting heads hold material with claw like cutting cylinders pulling material into the unit.
    • Automatically reverses material if too thick until the item is totally destroyed.
    Part #: 176704

    $11279.57

  9. Proton Solid State Media Shredder (PDS-88)

    • Able to destroy SSD Drives, Smartphones, mobile phones, mini-tablets, credit cards, CDs/DVDs & USB sticks.
    • Specially designed cutting cylinders to destroy a variety of media devices.
    • Auto-Reverse is enacted to ensure complete destruction of all inserted media.
    • Small media destruction chute and larger media destruction flap built in for safe, efficient feeding.
    • An easy to use control panel resides on the top of the unit that allows users to push a button for all operations.
    Part #: PDS-88

    $11279.00

  10. Graphic Whizard Wizard GW 8000E Number/Perf/Score/Slit Machine (GW8000E)

    • 8,000 standard-size sheets per hour.
    • 100 job memory to store numbering jobs.
    • Up to 100 numbers per head per sheet.
    • Up to 2 heads.
    • Crash number up to 10 part carbonless.
    Part #: GW8000E

    $11275.00

  11. Destroyit MBM 4108 Level P-2 High Capacity Strip-Cut Paper Shredder (DSH0345L)

    • Easy-Switch. Ease of operation: intelligent multifunction switch with integrated optical signals indicating the operational status.
    • Electronic Oil Injection. The automatic oil injection system lubricates the cutting shafts when shredding and guarantees a constantly high shred performance. Oil droplet icon will illuminate when more oil is needed.
    • Pull-out Bag Suspension. Pull-out mechanism on wheels for easy removal of the full shred bag at the rear of the machine.
    • Conveyor Belt. The conveyor belt system guarantees a high work speed without creating paper jams. Also crumpled paper can be fed into the shredding head without problems.
    • Illumination of the Working Area. The feeding area and the conveyor belt are illuminated by LEDs.
    Part #: DSH0345L

    $11249.00

  12. Formax Hard Drive Shredder (FD 87HDS)

    • Standard Features:
    • Separate Shredding Chambers: Accommodate 3.5" desktop and 2.5" laptop hard drives
    • Hardened Solid Steel Cutting Blades: Specially ground for strength and durability
    • LED Control Panel: Provides centralized control and displays real-time status
    • Resettable LED Counters: Each shredding chamber features its own resettable counter, for added accountability
    Part #: FD 87HDS

    $11249.00

  13. Formax Cut-True 29A 20.5" Electric Programmable Guillotine Cutter (CutTrue 29A)

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Electronically-Controlled: Paper clamp pressure and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut, allowing for precise adjustments prior to cutting
    Part #: CutTrue 29A

    $11245.50

  14. Graphic Whizard Wizard CreaseMaster Pro Friction Feed Creaser (CreaseMasterProFF)

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Floor model impact creasing machine for low to mid volume users.
    • Pneumatic model (requires compressed air).
    • Inverted and regular impact creasing in the same pass!
    • Menu driven touch screen controls allow for unequalled ease of use.
    Part #: CreaseMasterProFF

    $11190.00

  15. Formax 6210 Series Fully Automatic Folder and Inserter (FD-6210)

    • Five Models Available: Choose the configuration that best suits your applications
    • Basic 1 (Folder/Inserter with One Sheet Feeder)
    • Advanced 1 (Folder/Inserter with One Sheet Feeders and 1 BRE)
    • Basic 2 (Folder/Inserter with Two Sheet Feeders)
    • Advanced 2 (Folder/Inserter with Two Sheet Feeders and 1 BRE)
    Part #: FD-6210

    $10995.00

  16. Supply55 Guardian 82" Heat Assist Wide Format Laminator (55-LM2100HA-01)

    • Type: Wide Format, Heat Assist
    • Speed: Variable, up to 23 ft/min (7m/min)
    • Laminate Width: 82.67 in (2100 mm)
    • Maximum Media Thickness: 0.57 in (14.48 mm)
    • Power: 120 V / 60Hz, 9A, 1300 Watts, CE Approved
    Part #: 55-LM2100HA-01

    $10995.00

  17. Baum 714XLT 8-Page Right Angle Tabletop Paper Folder (BAUM714XLTRA)

    • Toner-resistant fold rollers [urethane only].
    • Polyurethane fold rolls.
    • Gear-driven fold rolls.
    • Automatic fold roller tensioning.
    • Angular roll cross carrier.
    Part #: BAUM714XLTRA

    $10994.00

  18. Ledco Econocraft 60" Laminator Roll Applicator (2160103U)

    • A scrap rewind with an adjustable clutch takes up the release liner found on many pressure sensitive films.
    • Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
    • The laminating roller opening is adjustable in seconds and allows operators to work with different thickness materials.
    • A variable speed motor control allows operators to apply different materials to different substrates.
    • Interchangeable rubber rollers help keep maintenance costs down.
    Part #: 2160103U

    $10993.67

  19. Ledco Heavy Duty 20" Hot Roll Laminator with Stand (H20)

    • Variable speed. The laminator operates at any speed up to 10 feet / 3 meters per minute. Thicker hot films are generally applied better at mid-range to lower speeds, while 1.5 mil hot films should be applied at mid-range to higher speeds.
    • Attached safety shield. The polycarbonate shield is clear so operators can see their work. It does not conduct heat so they’ll be protected from hot areas. It is fixed to the laminator and the machine will not run if the feed tray and safety shield are not in place.
    • Lamination pressure. The rubber rollers are spring-loaded and preset to ensure correct and even lamination pressure. The pressure is easy to adjust if required when performing routine maintenance.
    • Ease of cleaning. The heated silicone rubber laminating rollers, and the silicone rubber pull rollers of the laminator should be cleaned regularly. The safety shield (see below) on the laminator swings away in seconds, making it easy to clean the laminating rollers.
    • Precision Heat Controls. Individual top and bottom heat controls, as used on our other Digital Laminators, allow for even, consistent heating of the laminating rollers throughout the entire temperature range.
    Part #: H20

    $10993.67

  20. Ledco Signmaster 44" Hot Roll Laminator & Mounter 110V (2044110)

    • A release liner take-up with an adjustable clutch, takes up the release liner found on most pressure-sensitive films.
    • Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
    • A variable speed motor control allows operators to apply different materials to different substrates. A preset 3-function switch allows operation in variable speed mode, a preset film speed mode and a preset pouch speed mode.
    • The feed tray is non-ferrous, so magnetic materials may be applied.
    • The supply roll tension knobs are important, because without some supply roll tension, most films and tapes will wrinkle during application.
    Part #: 2044110

    $10993.67

  21. Therm-O-Type Automatic Foil-Tech Foil Fuser (TOT-AFT)

    • Maximum Sheet Size: 14.5" W x 2' L
    • Maximum Foil Roll Size: 24" W x 2000' L
    • Adjustable Speed: Yes
    • Adjustable Temperature: Yes
    • Core Size: 1"
    Part #: TOT-AFT

    $10799.00

  22. Ledco HD 25 Workhorse 25" Laminator with Stand (7025500)

    • Intelligent heat controllers. These heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
    • Laminating and pull rollers. These rollers are covered with quality silicone rubber for superior release quality, higher lamination quality, and easier cleaning. The laminating rollers and pull rollers are interchangeable.
    • Removable heat shoes. These shoes are teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
    • Built-in retractable slitters. These slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
    • Dual tension knobs. The dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work wrinkle-free.
    Part #: 7025500

    $10794.00

  23. Ledco Econocraft 44" Laminator Roll Applicator (2044102U)

    • A scrap rewind with an adjustable clutch takes up the release liner found on many pressure sensitive films.
    • Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
    • The laminating roller opening is adjustable in seconds and allows operators to work with different thickness materials.
    • A variable speed motor control allows operators to apply different materials to different substrates.
    • Interchangeable rubber rollers help keep maintenance costs down.
    Part #: 2044102U

    $10764.89

  24. Rhin-O-Tuff Heavy Duty Binding Punch with Ejector and Stacker (HD7700PA)

    • 14" ( 356mm ) open ended extra capacity die: Punch up to 55 sheets or 110 pages of 11 inch, 20 lb or 80gsm bond paper.
    • U-View waste tray: Holds up to 150% more waste than any other table top punch & eliminates troublesome overfills.
    • The Accu-Set Paper Stop: Set-up all hole placements easily & accurately, even on odd sized paper.
    • Diagnostic Display Lights: Give indications of important machine conditions.
    • Built in Automatic and Manual Reverse: Providing extra insurance to eliminate costly down time & expensive service calls due to overload jams.
    Part #: HD7700PA

    $10681.08

  25. Formax Low Volume Industrial Burster (FD 550)

    • Paper weight: 100lb total, up to 4 parts (none exceeding 60lb tag stock)
    • Speed: Variable, 0-200 feet per minute
    • Form Size: 2.375" -16"W x 2.75" -12"L (slitting) 2.375" -14.5"W x 2.75" x 12"L (non-Slitting)
    • Dimensions: 59" L x 32" W x 56.5" H with cabinet
    • Weight: 193 lbs
    Part #: FD 550

    $10650.00

  26. Deluxe Stitcher 5/16" Wire Stitcher With Two G8 Heads (M17G8-AST)

    • Designed to staple both flat and saddle work ranging in thickness from 2 sheets to 5/16"
    • Equipped with two heads standard, but can be operated with as many as eight G8 heads installed at one time.
    • Maximum center to enter distance is 18", minimum is approximately 1-7/8".
    • The recommended wire sizes are as follows: 23 - 28 gauge round and 21x25 flat
    • Easily adjusted from saddle work to flat work by means of tilting the 6-1/2" x 33" work table. An adjustable work guide and adjustable work stops are easily attached to work table and provide for accurate registering of flat work for uniform spacing of staples.
    Part #: M17G8-AST

    $10610.00

  27. Formax ColorMaxLP Digital Color Label Printer (FDColorMaxLP)

    • High-speed color printing for a variety of inkjet-compatible label sizes and surfaces including gloss, semi-gloss, matte.
    • Full-color inkjet with Memjet® thermal technology.
    • Speeds of up to 12 inches per second / 60fpm.
    • Up to 1600 x 1600 dpi resolution.
    • LCD control panel with LED indicators.
    Part #: FDColorMaxLP

    $10600.00

  28. Duplo Desktop Perfect Binder (DB-290)

    • Makes a wide range of book sizes from 4.72" x 1.97" to 12.6" x 15.75".
    • Single-operator design for greater productivity.
    • Fast and easy setup and changeover.
    • Unique roughing and notching method provides maximum glue penetration.
    • Side glue provides better adhesion for professionally finished book spines.
    Part #: DB-290

    $10500.00

  29. Truline Preferred Pack High Capacity Shrink Tunnel (PP3610-60)

    • Fully Re-Circulating Chamber.
    • 4 Directional Air Flow.
    • State-of-the-Art AC Varaible.
    • Automatic Tunnel Cool Down with Shut Off.
    • Thermal Overload Protection on All Motors.
    Part #: PP3610-60

    $10500.00

  30. MBM Aerocut NanoPLUS Air Feed Paper Slitter and Cutter (CU0439)

    • Feed table elevates and sinks to separate digital stocks to avoid misfeeds and/or markings.
    • Self-correcting cut mark registration feature ensures accurate cuts every time.
    • Able to cut 250 full bleed business cards in 3 minutes using 24up, 12" x 18" sheets.
    • Handles a variety of digital stocks with weights up to 350 gsm and sheet sizes up to 13 x 19 inches.
    • Density sensor for true double feed detection resulting in faster turn times and greater accuracy.
    Part #: CU0439

    $10499.00

Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80   90   100   110   200   300   400   500   600   700   800   900   1,000   1,107