Product listing: Intimus S Desktop Envelope Folder / Inserter with FREE 32CC3 Shredder (TSI-4) to D&K Group &K Expression 62 Plus Wide Format Laminator (EXP62+)
-
Intimus S Desktop Envelope Folder / Inserter with FREE 32CC3 Shredder (TSI-4)
- Intelligent and Easy Document Processing. An easy-to-use desktop folder inserter that can be used to process all your mail
- Choices of four configurations to cover all your mail management applications.
- 1 Station
- 1.5 Stations
- 2 Stations
Part #: TSI-4 -
Deluxe Stitcher M30-AST 1-1/4" Single Head Wire Stitcher (M30-AST-114)
- A stitch capacity from 2 sheets up to 1-1/4" [32 mm] standard.
- The ability to run flat, saddle, or corner stitched jobs.
- Stab stitch capability up to 2" (51mm).
- Wire Sizes: 20-28 gauge round or 19 x 21-1/2, 20x24 and 21x25 flat.
- Clinch: moveable clincher for flat stitching and adjustable table height for stab stitching.
Part #: M30-AST-114 -
Graphic Whizard Wizard CreaseMaster Pro Hand Feed Creaser (CreaseMasterProHF)
- Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
- Floor model impact creasing machine for low to mid volume users.
- Pneumatic model (requires compressed air).
- Inverted and regular impact creasing in the same pass!
- Menu driven touch screen controls allow for unequalled ease of use.
Part #: CreaseMasterProHF -
Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter (CH-SPARTAN185A)
- Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
- Independent Clamping Function: Allows for a "clamp only" operation
- Manual Backgauge Control: Hand Wheel Control
- LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
- Laser Red LED Cut Line Light: produces a bright easy to see cut line.
Part #: CH-SPARTAN185A -
Formax ATLAS Air-Feed Document Folder (FDATLAS)
- High-Speed Output: Large jobs are processed quickly at speeds of up to 27,000 pieces per hour.
- Powerful Air Suction Feed Table: Handles a variety of coated and non-coated stock, in a range of.
- paper weights and sizes, up to 25.5" in length.
- Simple, Accurate Alignment : Squares and aligns sheets prior to feeding.
- Low-Pressure Air Chamber: Designed specifically to control curled paper prior to entering fold rollers.
Part #: FDATLAS -
Formax FD 8806CC Cross-Cut Industrial Conveyor Shredder (FD8806CC)
- Belt-Feed Industrial Shredding System: Designed to shred entire files, stacks of computer forms, cardboard, tapes, ribbons, CDs and magnetic disks.
- LED Control Panel: Integrated digital load indicator and sensors.
- Front Waste Bin Access: Front cabinet door allows the shredder to be placed against a wall to maximize space savings.
- Auto Start/Stop Mode: Optical sensor detects paper and starts operation automatically .
- EvenFlow™ Automatic Internal Oiling System: Lubricates cutting blades for optimal performance .
Part #: FD8806CC -
MBM Trimmer for Sprint 3000 and 5000 (BO0847)
- Type: Sprint Trimmer
- Sheet Capacity (20# paper): 25 Sheets
- Compatible Booklet Makers: Sprint 3000 and 5000 Booklet Maker
- Dimensions: 27" W x 22" D x 35" H
- Part Number: BO0847
Part #: BO0847 -
Destroyit MBM Degausser and Hard Drive Punch (HDP0102)
- Security Level: H-3 (HDP unit)
- Hard drive Sizes: 2 1/2" or 3 1/2"
- Erasing Area (H x W x D): 1 1/2" x 4 1/4" x 6"
- Degaussing Cycle: 60 sec.
- Degaussing System: capacitive discharge
Part #: HDP0102 -
Baum 714XLT 8-Page Right Angle Tabletop Paper Folder (BAUM714XLTRA)
- Toner-resistant fold rollers [urethane only].
- Polyurethane fold rolls.
- Gear-driven fold rolls.
- Automatic fold roller tensioning.
- Angular roll cross carrier.
Part #: BAUM714XLTRA -
Renz 500 ES Professional Heavy-Duty Punch (R-500ES)
- Punching patterns for all ring wire, plastic comb, coil, calendars and bespoke dies available on request.
- Fast die changes in under 5 minutes.
- 2 part split dies for calendar work.
- QSA (Quick Size Adjustment).
- Horizontal paper feeding.
Part #: R-500ES -
Formax FD 8806SC Strip-Cut Industrial Conveyor Shredder (FD8806SC)
- Belt-Feed Industrial Shredding System: Designed to shred entire files, stacks of computer forms, cardboard, tapes, ribbons, CDs and magnetic disks.
- LED Control Panel: Integrated digital load indicator and sensors.
- Front Waste Bin Access: Front cabinet door allows the shredder to be placed against a wall to maximize space savings.
- Auto Start/Stop Mode: Optical sensor detects paper and starts operation automatically.
- EvenFlow Automatic Internal Oiling System: Lubricates cutting blades for optimal performance.
Part #: FD8806SC -
Royal Sovereign 55" Heat Assist Wide Formal Roll Laminator (RSC-5500H)
- Fast laminating speeds of up to 28 ft./min.
- Heavy duty construction
- Mounting gap of up to 2”
- Unique FilmSaver system automatically senses when there is no media feeding into the rollers and slows down the rollers to save film waste
- High quality silicone rubber rollers
Part #: RSC-5500H -
Count PerfMaster Air V3 18" Automatic Perforating and Scoring Machine (CPMASTERV3)
- New and improved heavy-duty air feed eliminating marking and scuffing on documents
- Interchangeable paper caliper used for open edge carbonless forms to heavy gauge glossy stock
- 18" wide feed capacity
- Quickly change from perfing to scoring in a matter of minutes
- Simple to use one button operation speed control
Part #: CPMASTERV3 -
Custom Supplies (CUSTOMSUPPLIES)
- Category: New Releases
Part #: CUSTOMSUPPLIES -
Part #: SERVICEEMA
-
Part #: EMA-3PSP
-
Part #: NONSTOCKITEM-BINDEQUIP
-
Part #: NONSTOCKITEM-BINDSUPPLIES
-
Part #: NONSTOCKITEM
-
Non Stock Laminating Equipment (NONSTOCKITEM-LAMEQUIP)
- Category: New Releases
Part #: NONSTOCKITEM-LAMEQUIP -
Part #: NONSTOCKITEM-LAMSUPPLIES
-
Part #: NONSTOCKITEM-OTHEREQUIP
-
Non Stock Other Supplies (NONSTOCKITEM-OTHSUPPLIES)
- Category: New Releases
Part #: NONSTOCKITEM-OTHSUPPLIES -
Part #: NONSTOCKITEM-PACKEQUIP
-
Non Stock Packaging Supplies (NONSTOCKITEM-PACKSUPPLIES)
- Category: New Releases
Part #: NONSTOCKITEM-PACKSUPPLIES -
Part #: SERVICEPARTS
-
Part #: SERVICETRAVEL
-
NeuraLabel 300x CP Narrow-Width High-Speed Full Color Digital Label Printer (PK-300X-CP)
- Handles continuous or pre die-cut rolls of label media.
- Uses media as narrow as 1.5 inches.
- Uses a built-in universal power supply (110V or 220V).
- Prints up to 20 inches per second.
- Media Width: 1.5" - 8.5"
Part #: PK-300X-CP -
Graphtec 25.9" X 19.2" Flatbed Vinyl Cutter and Plotter (FCX4000-50)
- Stronger Media Hold-Down. Holds media by electrostatic that is generated by electrodes arranged inside the panel. This method is suitable for cutting light weight materials.
- Provided tools suitable for many applications. The FCX4000 series has 2 tool holder in the carriage. Using 2 different tools in the same job increases work efficiency.
- Intuitive operation with 3.7" LCD. Settings can be easily set using the large 3.7-inch LCD (240 x 128 dots).
- Offline operation supported by use of USB flash memory. Cut and plot data is created with Cutting Master 4 or Graphtec Pro Studio. That saved data may be transferred to a USB flash memory and the cut plot data file can be selected from the USB on the FCX4000 using its menu operations. This simplified work-flow enables users to operate without being connected to the computer.
- Data management using bar-code function with USB flash memory. When performing contour cutting, also known as “Print & Cut”, the cutting data is automatically selected from the prepared USB flash memory. The FCX4000 scans the bar code printed on the media then automatically performs the contour cutting job. This emerging method helps to prevent operator error of using incorrect data - thus improving workflow efficiency.
Part #: FCX4000-50 -
D&K Group &K Expression 62 Plus Wide Format Laminator (EXP62+)
- Easy to Use
- Mounter, Laminator, Encapsulator (prints up to 61" wide.)
- Fast set-up and easy operation
- Roller lift for easy film loading
- In-line slitter for trimming during lamination (optional)
Part #: EXP62+
