Product listing: Afinia Label DLP 2100 Digital Label Press with L901 Printer (DLP-2100) to Destroyit 5009 Level P-3 High Capacity Cross-cut Shredder (DSH0331)
-
Afinia Label DLP 2100 Digital Label Press with L901 Printer (DLP-2100)
- Can print, die cut, and finish labels at up to 60 feet per minute, making it the fastest and most advanced digital label press in its class.
- This full-featured workhorse is capable of laminating, die cutting, waste matrix removal, slitting and rewinding to finished rolls that are compatible with automatic application systems.
- With the Afinia Label L901 Digital Label Printer inline, the DLP-2100 can produce more than 25,000 full-color 3 x 4 inch labels per hour.
- For larger brands, this makes it ideal for bringing label production in house.
- Print shops can offload their small- to mid-sized label runs, freeing up large format presses while reducing costs and setup times.
Part #: DLP-2100 -
Royal Sovereign 79" Calender Heat Transfer System With 14" Oil Drum (RHPO-2135)
- Extra-long self-contained oil heated drum to ensure complete heat distribution and coverage.
- Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
- Universal core adapters and shaft-less unwinding technology.
- Images are permanent and do not peel or fade.
- Bonding of the dye to the synthetic fibers creates extraordinarily vivid colors.
Part #: RHPO-2135 -
Truline Preferred Pack Inline Fully Automatic Sleeve Wrapper with Attached Tunnel (SFE-1800NF)
- Speed: 5 to 20 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 80 Amp
- Seal Size: 70"
- Max Roll Width: 65.5"
- Max Package Height: 17"
Part #: SFE-1800NF -
Royal Sovereign 79" Calender Heat Transfer System With 14" Oil Drum (RHCO-2135)
- Extra-long oil drum to ensure complete heat distribution and coverage.
- Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
- Universal core adapters and shaft-less unwinding technology.
- Easy to reach front and rear facing emergency stops.
- Emergency Reverse.
Part #: RHCO-2135 -
James Burn Lhermite EX610 Automatic Punch with High Pile Reception Unit (04JBEX610)
- Maximizes productivity at up to 8,400 cycles/hour, at up to 20 sheets of 60# offset.
- Capable of producing up to 125,000 punched sheets per hour
- Automatic for up to 24" sheet widths. Allows you to punch tabbed stock pre-collated into the book.
- So powerful it punches virtually any type of stock and material for practically any application.
- Continuous paper loading speeds productivity without stopping the machine.
Part #: 04JBEX610 -
James Burn EX380 High Speed Automatic Punch with Conveyor (04JBEX380+CON)
- Maximizes productivity at up to 8,400 cycles/hour, at up to 20 sheets of 60# offset.
- Will handle a sheet sizes from a 4 1/4" (punched edge) x 3 7/8" (non-punched edge) to a max size of 15" x 15".
- Allows you to punch tabbed stock pre-collated into the book. Tabs must have a minimum of 1/4" shoulders. For larger width applications the Lhermite EX610 Auto Punch will handle widths up to 24"
- Reduces the minimum unbound edge to 5 1/4".
- Punches virtually any type of stock and material for practically any application.
Part #: 04JBEX380+CON -
Morgana DigiBook 300XL Pro Automatic PUR Perfect Binding Machine (DigiBook-300XL-Pro)
- 300 books per hour.
- Touch screen operation complete with automatic format change.
- Pneumatic opening and closing of clamp.
- Binding length (spine) from 3.93" up to 17.71".
- Spine thickness from 0.07" to 1.96".
Part #: DigiBook-300XL-Pro -
James Burn EX380 High Speed Automatic Punch with Jogger (04JBEX380+JOG)
- Maximizes productivity at up to 8,400 cycles/hour, at up to 20 sheets of 60# offset.
- Will handle a sheet sizes from a 4 1/4" (punched edge) x 3 7/8" (non-punched edge) to a max size of 15" x 15".
- Allows you to punch tabbed stock pre-collated into the book. Tabs must have a minimum of 1/4" shoulders. For larger width applications the Lhermite EX610 Auto Punch will handle widths up to 24"
- Reduces the minimum unbound edge to 5 1/4".
- Punches virtually any type of stock and material for practically any application.
Part #: 04JBEX380+JOG -
James Burn BB50H High Speed Semi-Automatic Wire Binding Machine (04JBBB50)
- Versatile: BB50H Finishes documents and calendars up to 20" in width.
- Productive: High output speeds of 600-1200 books per hour, depending on finishing type and operator skill.
- Easy to Use: Automatically cuts wire to length, feeds and positions wire for insertion, and finishes hand fed pre-punched documents and calendars.
- Adaptable: Accommodates all Wire-O sizes from 1/4" up to 1", using either standard or jumbo spools in 3:1 and 2:1 pitches.
- Skip Binds: With or without calendar hangers.
Part #: 04JBBB50 -
Intimus VZ14.00 2mm x 4.5mm Cross Cut Industrial Shredder with Baler (553914)
- Shredded material from the first stage drops directly onto a conveyor belt which takes it straight to the final stage cutting mechanism
- Cross-cut particles drop into the compacting chamber of the 8 ton hydraulic baler and are compressed into compact bales
- Audible "bale completed" signal
- The compressed bale is simply ejected from the compacting chamber by a push-button - directly into a heavy-duty plastic bag
- Shredded material from the first stage drops directly onto a conveyor belt which takes it straight to the final stage cutting mechanism
Part #: 553914 -
Formax FD 8906B Industrial Shredder and Baler (FD8906B)
- Designed to shred entire files, stacks of computer forms, cardboard, tapes, ribbons, CDs and magnetic disks.
- Heat-treated solid steel cutters are specially ground for longevity and require minimal oil.
- LED Control Panel features visual load indicator.
- Output Baler continually compacts shredded material into a bale, increasing capacity and minimizing the frequency of unloading.
- Auto Start/Stop mode uses optical sensors to detect paper and start operation automatically.
Part #: FD8906B -
Formax FD 7202 Series High-Volume Folder and Inserter (FD-7202)
- Modular Design: Flexibility to add feed stations, from 1 to 11.
- Intuitive User Interface: 22" color touchscreen, with context-sensitive help on every screen.
- Quick and Easy Setup: Automatic job setup with document & envelope library.
- Programmable Jobs: Unlimited.
- Flats Insertion: Inserts into landscape format flat envelopes, up to 10" x 13".
Part #: FD-7202 -
Intimus VZ14.00 2mm x 15mm Cross Cut Industrial Shredder with Baler (553904)
- Shredded material from the first stage drops directly onto a conveyor belt which takes it straight to the final stage cutting mechanism
- Cross-cut particles drop into the compacting chamber of the 8 ton hydraulic baler and are compressed into compact bales
- Audible "bale completed" signal
- The compressed bale is simply ejected from the compacting chamber by a push-button - directly into a heavy-duty plastic bag
- Shredded material from the first stage drops directly onto a conveyor belt which takes it straight to the final stage cutting mechanism
Part #: 553904 -
MBM AeroCut Prime Complete Air Feed Paper Slitter-Cutter-Creaser-Perforator Digital Finisher (Aerocut-Prime)
- Basic Functions:
- Creasing Unit. Channel creasing is equipped on the AeroCut Prime, allowing the machine to offer world-class creases on digitally printed stocks. Creasing pressure can be adjusted in 5 levels instantly by shifting the lever.
- Slitting / Cutting Units. The AeroCut Prime features 2 single blade slitters to trim top & bottom margins of sheets, and 2 double blade slitters, bleed centre gutters and deflect wastes into a waste bin. The durable guillotine cuts stocks up to 400gsm in weight. All the slitter and guillotine blades are self-sharpening.
- Feeding Unit. The AeroCut Prime feeds printed stocks one-by-one from the top of the ream on the feed tray. The air-suction top feed system feeds even coated stock precisely without damage. There are several features to ensure feeding several weights and qualities of stocks every time.
- Features:
Part #: Aerocut-Prime -
HSM SP5088C Shredder/Baler Combination (HSM-365511 )
- Optimized cutting device technology destroys 500-550 sheets of paper, creating 150 particles per page; 3-7 bales per hour;
- Also shreds staples, paper clips, credit/store cards, CDs/DVDs, floppy disks, and USB sticks.
- Obliterates large quantities such as archives and bulk storage.
- Material feed via electronic conveyor belt.
- Anti-Jam Technology prevents jams when machine is overloaded.
Part #: HSM-365511 -
D&K Group &K Double Kote Digital Narrow Format Laminating System (DOUBLEKOTEDIGITAL)
- New pivoting belt table on the automatic sheet feeder offers easy access for film setup and changeovers.
- Improved inline slitting system with new scrap takeup mandrel.
- Digital touch pad control panel for precision adjustments and reduced scrap.
- Operator friendly lamination system designed to run stock films from standard up to 5 mils thick.
- Lamination working width up to 22? wide to handle virtually all digital printed stock.
Part #: DOUBLEKOTEDIGITAL -
Formax FD 7104 Series High-Volume Folder and Inserter (FD-7104)
- Modular Design: Flexibility to add up to 8 modules with up to 17 feed stations.
- Intuitive User Interface: 22" color touchscreen.
- Quick and Easy Setup: Automatic job setup.
- Programmable Jobs: Unlimited.
- Versatile: Inserts sets up to 6mm thick.
Part #: FD-7104 -
Truline Preferred Pack Right Angle Fully Automatic Sleeve Wrapper with Attached Tunnel (SFE-1500AU)
- Speed: 5 to 15 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 65 Amp
- Seal Size: 57"
- Max Roll Width: 54.5"
- Max Package Length: 27"
Part #: SFE-1500AU -
HSM SP 5080 Level 3 Shredder Baler Combination (HSM-365520)
- Optimized cutting device technology destroys 500-550 sheets of paper, creating 150 particles per page;
- Compresses 4-9 bales per hour.
- Also shreds staples, paper clips, credit/store cards, CDs/DVDs, floppy disks, and USB sticks.
- Obliterates large quantities such as archives and bulk storage.
- Material feed via electronic conveyor belt.
Part #: HSM-365520 -
Truline Preferred Pack Inline Fully Automatic Sleeve Wrapper with Attached Tunnel (SFE-1500NF)
- Speed: 5 to 20 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 80 Amp
- Seal Size: 57"
- Max Roll Width: 54.5"
- Max Package Height: 17"
Part #: SFE-1500NF -
Royal Sovereign 67" Calender Heat Transfer System With 14" Oil Drum (RHCO-1835)
- Optimal Working Width: 67"
- Maximum Temperature: 446°F (230°C)
- Maximum Speed: 7.2ft./min. / 2375 ft²/min.
- Heat System: Self-Contained Oil
- Warm Up Time: 1 Hour
Part #: RHCO-1835 -
Royal Sovereign 67" Calender Heat Transfer System With 14" Oil Drum (RHPO-1835)
- Extra-long self-contained oil heated drum to ensure complete heat distribution and coverage.
- Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
- Universal core adapters and shaft-less unwinding technology.
- Images are permanent and do not peel or fade.
- Bonding of the dye to the synthetic fibers creates extraordinarily vivid colors.
Part #: RHPO-1835 -
SEAL 65 Pro MD 65" Wide Format Roll Laminator (SEAL-65ProMD)
- Dual IR Quartz heated rollers capable of running both hot and cold films.
- 65" working width to handle a wide range of media.
- Maximum operating speed of 15’/minute.
- 2" nip with precision pneumatic rollers for even speed and pressure to ensure smooth, wrinkle-free graphics.
- Bi-directional operation allows for efficient operating.
Part #: SEAL-65ProMD -
Truline Preferred Pack Semi Automatic Sleeve Wrapper with Attached Tunnel (SFE-1800SA)
- Speed: 5 to 15 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 80 Amp
- Seal Size: 68"
- Max Roll Width: 65"
- Max Package Length: 36"
Part #: SFE-1800SA -
Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)
- Up to 24 cuts per minute.
- Virtually maintenance-free design.
- Fully-adjustable knife bar gibs (front and rear).
- Electronically-adjustable and programmable clamp pressure.
- Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
Part #: CH-370TC -
Royal Sovereign 77" Calender Heat Transfer System With 14" Infra-Red Quartz Drum (RHCI-2135)
- Extra-long infra-red quartz heated drum to ensure complete heat distribution and coverage.
- Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
- Universal core adapters and shaft-less unwinding technology.
- Easy to reach front and rear facing emergency stops.
- Emergency Reverse.
Part #: RHCI-2135 -
Royal Sovereign 77" Calender Heat Transfer System With 14" Infra-Red Quartz Drum (RHPI-2135)
- Extra-long infra-red heated drum to ensure complete heat distribution and coverage.
- Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
- Universal core adapters and shaft-less unwinding technology.
- Images are permanent and do not peel or fade.
- Bonding of the dye to the synthetic fibers creates extraordinarily vivid colors.
Part #: RHPI-2135 -
Challenge CMT-130TC Book Trimmer (CMT-130BT)
- Trim up to 2" / 50.8 mm thick perfect-bound books.
- 10.5" Color Touch screen controller with graphical display of the system with live book location.
- Fully-automated size change in under 10 seconds with no tools required.
- Modular design – can be configured off-line, near-line, or in-line at any time.
- Integrated bar code reader automates size changes between jobs.
Part #: CMT-130BT -
HSM FA500.3 Level P-5 Cross-cut Industrial Shredder (HSM1993)
- Order number: HSM1993
- EAN Code: 4026631033213
- Shredder material: Paper, CD/DVD, Floppy Disk, USB Stick, Paper Clip and Credit/Store Cards
- Cutting type: Cross Cut
- Security level (DIN 66399): P-5 (Old Level 4)
Part #: HSM1993 -
Destroyit 5009 Level P-3 High Capacity Cross-cut Shredder (DSH0331)
- Dual high powered 3 phase motor rated for continuous operation
- Fully enclosed, dust-proof gearbox housing
- Large shred compartment with easy-access door located in back of machine
- Pull-out bag frame mechanism mounted on rollers for easy replacement of disposable shred bags
- 79 gallon bin capacity
Part #: DSH0331
