Product listing: Intimus 175CC4 5/64" x 19/32" Micro Cut Shredder (297144) to Graphic Whizard Motorized Transport System (GW-TRANSPORT-SYSTEM)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Intimus 175CC4 5/64" x 19/32" Micro Cut Shredder (297144)

    • New i-control system informs user of shredder status
    • Silentec whisper quiet operation
    • 2x2 system separates paper and non-paper waste
    • New contemporary design
    • Reverse function
    Part #: 297144

    $3362.35

  2. Swingline Stack-and-Shred 600M Auto-Feed Micro Cut Shredder (SWI-1758577)

    • Spend less time shredding versus a traditional shredder - just stack, shut and you're done
    • Micro-cut shredder meets high security needs (Level P-5)
    • Shred up to 600 sheets with automatic shredding and up to 9 sheets at a time during manual feed shredding
    • 21-gallon pull-out waste bin with bin full indicator
    • Continuous duty run time lets you shred more paper faster
    Part #: SWI-1758577

    $3359.68

  3. PostMark 3030 Rotary Letter Opener (P-3030)

    • Rotary. Cuts wide and deep.
    • Efficient. Opens flats, Tyvek and plastic envelopes - and much more.
    • Easy to Operate. Ideal opener when large quantity of flats or other hard to open envelopes are used.
    • Waste Disposal "bin" included. Optional large waste disposal bin available.
    • Low Cost. A machine that pays for itself even for the small user.
    Part #: P-3030

    $3347.14

  4. Martin Yale Smartfold Electronic Paper Folding Machine (2051)

    • Handles paper weight from 18lb. to 90 lb. index, 68GSM to 166GSM.
    • Variable speed ranges from 3,000 to 15,000 sheets per hour.
    • Folds sheet sizes from 2.5" x 5.2" to 12" x 18".
    • Feed table capacity can hold up to 500 sheets of 8.5" x 11", 20 lb. bond.
    • High memory capacity with 7 preset folds and 10 custom folds.
    Part #: 2051

    $3346.51

  5. Drylam 18" Versatile Tabletop Multi-Laminator and Mounter (LPP4513)

    • One Side Laminating – System has a built-in decurler bar to produce flat sheets. Built-in perforator wheel weakens the edge of the lamination for easy hand sheet separation.
    • Two Side Laminating – Film thicknesses from 1.2 mil through 5 mil.
    • Mounting – Roller pressure gaps to allow insertion of foam boards for mounting as well as simultaneous mounting and laminating for signs, trade show displays, etc.
    • Foot pedal web advance included.
    • Easy set temperature dial, ready light when set temperature is achieved.
    Part #: LPP4513

    $3344.00

  6. Rhin-O-Tuff Medium Duty Electric Plastic Comb Binding System (4012PB)

    • Comb Die with easy disengageable pins - Included
    • 14" manual comb inserter - Included
    • Attachment kit for mounting comb inserter on top of punch - Included
    • Automatic and Manual Reverse feature to reduce jamming in the punch
    • Punches up to 30 sheets of 20 lb paper
    Part #: 4012PB

    $3340.00

  7. Polar Prism Saber 107EL, 112EL, 115EL, 115CE Tungsten Carbide Blade (JH-44750TCT)

    • Material: Tungsten carbide tipped
    • Compatible Models: Polar Prism Saber 107EL, 112EL, 115EL, 115CE.
    • Holes: 26 Staggered Holes
    • Hole Size: M12
    • Length: 54.724"
    Part #: JH-44750TCT

    $3336.19

  8. GBC AP2 Ultra ColorCoil .2475 Oversize Oval Die Set (0177487400)

    • Type: GBC AP2 Ultra Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: GBC ColorCoil
    • Pitch: 4:1 Pitch (0.2475)
    • Hole Shape: Oversize Oval
    Part #: 0177487400

    $3334.00

  9. Rhin-O-Tuff Medium Duty Electric 2:1 Wire Binding System (4012W2)

    • 2:1 Wire Die with easy disengageable pins - Included
    • 14" manual flat bar wire inserter - Included
    • Attachment kit for mounting wire inserter on top of punch - Included
    • Automatic and Manual Reverse feature to reduce jamming in the punch
    • Punches up to 30 sheets of 20 lb paper
    Part #: 4012W2

    $3330.00

  10. Rhin-O-Tuff Medium Duty Electric 3:1 Wire Binding System (4012W3)

    • 3:1 Wire Die with easy disengageable pins - Included
    • 14" manual flat bar wire inserter - Included
    • Attachment kit for mounting wire inserter on top of punch - Included
    • Automatic and Manual Reverse feature to reduce jamming in the punch
    • Punches up to 30 sheets of 20 lb paper
    Part #: 4012W3

    $3558.86

  11. Standard Dial-A-Fold Desktop Paper Folder (PF-P3100)

    • Simplicity and Performance: The PF-P3100's innovative LED assisted manual set-up makes selecting between six preset standard folds and four common paper sizes fast and easy. Simply select a preset paper size and a fold format on the control panel and the LED fold position indicators automatically illuminate the corresponding fold alignment positions. The bright pinpoint settings of the LED system accurately highlights where to manually align each preset fold on the PF-P3100, making set-up a simple task for any operator. Highly productive with feeding speeds up to 240 sheets per minute, the PF-P3100 superior friction-feed system with three speed settings is flexible and reliable. Other key productivity features include a single sheet test feed button to assist set-up and a delivery conveyor to neatly stack folded sheets during production.
    • Selecting A Fold: The PF-P3100 offers six standard folds: letter, z-fold, gate, half, engineering, and double parallel for each of the four preset paper sizes. It is also simple to manually set-up a custom fold application with the PF-P3100's helpful calibrated fold positioning guide. It's fast. It's compact. It's easy to operate and maintain.
    • Preset Fold Formats: Letter Fold, Half Fold, Double Parallel Fold, Engineering Fold, Z-Fold, Gate Fold
    • Simplicity and Performance: The PF-P3100's innovative LED assisted manual set-up makes selecting between six preset standard folds and four common paper sizes fast and easy.
    • Selecting A Fold: The PF-P3100 offers six standard folds: letter, z-fold, gate, half, engineering, and double parallel for each of the four preset paper sizes.
    Part #: PF-P3100

    $3330.00

  12. Rhin-O-Tuff Large Office Electric Coil Binding System (4000C4)

    • Die with easy disengageable pins - Included
    • Electric coil inserter and crimpers - Included
    • Mounting kit - Included
    • Automatic and Manual Reverse feature to reduce jamming in the punch
    • Punches up to 20 sheets of 20 lb paper
    Part #: 4000C4

    $3474.86

  13. SealerSales High Profile Pallet Stretch Wrapping Turntable (SPW-59THP)

    • Versatile, economical turntable ideal for wrapping large pallets.
    • Loading ramp can be easily changed from side to front loading.
    • Foot pedal operated.
    • Machine dimensions: 83"L x 59"W x 19"H.
    • Variable speed 0-12RPM with soft start.
    Part #: SPW-59THP

    $3323.00

  14. Rhin-O-Tuff Onyx APES-14 Automatic Paper Ejector and Stacker (APES14-ONYX)

    • APES-14 attaches to the HD7700, HD7000 or HD6500 HD Punches
    • Ejects & Stacks in One Operation.
    • Extends the Useful Life of your Existing Equipment.
    • Increases Punching Output without a Large Capital Outlay.
    • Increases Productivity up to 50% without the Hiring of Additional Help.
    Part #: APES14-ONYX

    $3321.75

  15. HSM Securio P36ic IntelligentDrive Level P-6 Cross-Cut High-Security Shredder (HSM1855)

    • Drive and operating concept IntelligentDrive. Intelligent paper jam prevention due to the intelligent paper jam prevention feature, the system recognises automatically and quickly whether too much paper has been fed in. The machine goes into reverse or increases the power temporarily and pulls the paper in.
    • Operation via touch display. Operation via touch display with Intuitive operation and multi-language menu selection via the high resolution 4.3" touch display. Relevant information such as operating modes and status reports are displayed. Consumable material, machine and contact details can be called up.
    • Intelligent paper jam prevention. Due to the intelligent paper jam prevention feature, the system recognises automatically and quickly whether too much paper has been fed in. The machine goes into reverse or increases the power temporarily and pulls the paper in.
    • Low power consumption. The stand-by and automatic switch-off features ensure a high degree of energy saving when the shredder is not in use.
    • For continuous operation. Continuous Duty Operation ensures continual shredding with no down time.
    Part #: HSM1855

    $3311.28

  16. James Burn Lhermite AlphaDoc MK3 13" Punch - 3:1 Square Hole Wire Die Set (04ALPHADOC31S)

    • Type: Alpha-Doc MK3 Interchangeable Die Set
    • Punching Pattern : 3:1 Pitch
    • Hole Shape: Square
    • Hole Size: 4mm
    • Part Number: 04ALPHADOC31S
    Part #: 04ALPHADOC31S

    $3300.00

  17. Xyron 4400 44" Wide Format Cold Process Laminator (XRN4400)

    • Aggressive adhesive, coupled with high pressure rollers, improves both transfer and bonding qualities
    • Patented supplies allow quick and easy application changes
    • Even, edge-to-edge adhesive application
    • Environmentally safe
    • Footprint: 51" x 19" x 17" (130cm x 49cm x 44cm)
    Part #: XRN4400

    $3298.99

  18. Afinia Label L502 Industrial Color Label Printer With Duo Ink Technology (FREE INK) (AFNL502)

    • Print vibrant and colorful prime labels with dye-based inks.
    • Use pigment inks for exceptional water, abrasion, and UV resistance.
    • Industrial steel construction.
    • Flexibility to change label designs and content on the fly.
    • Best for short- to mid-sized print runs.
    Part #: AFNL502

    $3295.00

  19. Howard Model 45PN Air-Operated Hot Foil Stamping Machine (HD-45PN-AIR)

    • Solid-state dwell timer (controls how long head stays down).
    • 4-digit reset counter (counts number of impressions).
    • Built-in speed controls (can increase for faster production).
    • Air pressure gauge & regulator (controls how hard machine presses).
    • Maintenance free air cylinder.
    Part #: HD-45PN-AIR

    $3575.41

  20. NeuraLabel Rolled Media Unwind/Rewind System for 300X Label Printer (26807)

    • Provides more flexibility to your Neuralabel 300X label printer.
    • System is composed of a label unwinder, an adjustable slide-out printer shelf, and a label rewinder
    • The take-up reels keep the tension adjusted just right, feeding label material at the correct speed.
    • Equipped with adjustable table for easy line up of your variable sized label jobs.
    • The powered rewinder keeps the label rolls tight and ready to use on your label applicator.
    Part #: 26807

    $3250.00

  21. Baum AutoBaum B12M Desktop Paper Folder (Manual Setup) (BAUMB12M)

    • Manual setup of fold plates, manual setup of delivery wheels.
    • Multiple set feeder optional.
    • 15,500 folds per hour letter fold A4 or 11" long paper.
    • Pre-marked for six standard fold settings in common paper sizes.
    • Batch counter to process pre-set number of sheets and stops.
    Part #: BAUMB12M

    $3157.00

  22. Demo Pitney Bowes Relay 1000 Two Station Inserter (R4PIR10002S)

    • The Relay 1000 inserting system will:
    • Add Productivity: Automating mail folding and inserting saves time.
    • Ensure Accuracy: Eliminate costly delays in mailing due to manual errors.
    • Easy to use out of the box operation: Plug it in, load your materials and you’re ready to produce.
    • Provides flexible processing: Invoices, statements, letters, promotions and other correspondence are folded, inserted and securely sealed in envelopes, ready for mailing.
    Part #: R4PIR10002S

    $3229.05

  23. Plastikoil PBS TCB Dual Sided Crimping Unit (PBS-TCB)

    • No tools required for size changeovers.
    • Accommodates coil diameters from 6 mm to 50 mm without the need to change crimp heads.
    • Min/Max binding edge 5.5" ? 17" (14 cm ? 43 cm)
    • Easy to follow decals guide the operator through setup.
    • Removable off-cut tray makes accumulation and disposal of off-cuts neat and tidy.
    Part #: PBS-TCB

    $3231.43

  24. Swingline CM11-44 TAA Compliant Micro-Cut Shredder - 1753240B (SWI-1753240)

    • TAA Compliant; made in Germany
    • Micro-cut shredder meets high security needs (Level P-5)
    • Shreds up to 11 sheets at a time
    • 44-gallon pull-out waste bin with bin full indicator
    • Extra-wide, 16" paper entry facilitates shredding of large format sheets
    Part #: SWI-1753240

    $3413.98

  25. HSM 411.2 Level P-7 High Security CC Auto Oiler Shredder (HSM15644)

    • Cutting type: Cross Cut
    • Cutting size: 1/32" x 3/16"
    • Security level: P-7 (Old level 6)
    • Security levels DIN 66399: P-7 / F-3
    • Cutting capacity: 4 - 16 sheets
    Part #: HSM15644

    $3207.5965

  26. Formax Cut-True 22S 17" Electric Paper Cutter (FDCT22S)

    • Guillotine cutter accurately cuts through paper stacks up to 1.75" high, up to 16.9" wide
    • Semi-automatic with electronically-controlled two-hand operation
    • LED Laser cut line for pinpoint accuracy
    • High-quality hardened steel blade
    • Spindle-guided back gauge with LED display
    Part #: FDCT22S

    $3188.00

  27. Renz 500E Oval Hole 0.2475 Pitch Coil Binding Die Set (RZ500E2475OV)

    • Pitch Pattern: 4:1 (0.2475) Spiral Coil
    • Hole Shape : Oval
    • Hole Size: 5mm x 4mm
    • Thumbcut: No
    • Die Style: One Part Die
    Part #: RZ500E2475OV

    $3178.00

  28. Renz 500E Round Hole 5mm Coil Binding Die Set (RZ500E5MMRD)

    • Pitch Pattern: 5mm (5:1)
    • Hole Shape : Round
    • Hole Size: 3.6mm
    • Thumbcut: No
    • Die Style: One Part Die
    Part #: RZ500E5MMRD

    $3178.00

  29. Renz 500E Round Hole 6mm Coil Binding Die Set with Thumbcut (RZ500E6MMRD)

    • Pitch Pattern: 6mm (4:1)
    • Hole Shape : Round
    • Hole Size: 4mm
    • Thumbcut: Yes
    • Die Style: One Part With Thumbcut
    Part #: RZ500E6MMRD

    $3178.00

  30. Graphic Whizard Motorized Transport System (GW-TRANSPORT-SYSTEM)

    • Stand alone, motorized conveyor system.
    • Connect any machine to another eliminating the need for additional handling.
    • Pneumatic cylinder allows for height adjustment from a low 32"(81.25cm) to a maximum of 38"(96.5cm) With up to 30° of incline and decline available.
    • Allows machines of different heights to be easily connected.
    • Variable speed control up to 20,000 sheets per hour.
    Part #: GW-TRANSPORT-SYSTEM

    $3170.00

Items 1-15 of 22

Display Type List Grid
Page:   1   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   50   60   70   80   90   100   110   120   200   300   400   500   600   700   800   900   1,000   1,102