Product listing: GBC ColorCoil .250 Round Hole USP13 Die Set (0314150000) to Challenge 2436A 24" x 36" Combination Flat/Tilt Paper Jogger (CH-2436A)
-
GBC ColorCoil .250 Round Hole USP13 Die Set (0314150000)
- Type: GBC / Sickinger USP13 Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC ColorCoil
- Pitch: 4:1 Pitch (0.250)
- Hole Shape: Round
Part #: 0314150000 -
Ledco Premier 4 25" Roll Laminator 110V - 4025100C (4025110-A)
- Variable Speed. Operates at any speed up to 10 feet per minute. Thicker films are generally applied better at mid-range to lower speeds, while 1.5 mil film should be applied at mid-range to higher speeds.
- Digital thermometer and temperature control. Makes it easy to set and maintain the right temperature. The digital indicator light flashes as the machine warms up. At set temperature the indicator light stops flashing and a ready light comes on.
- Simple controls. Membrane switches provide a compact, reliable control pad. Icons and international symbols are used for controls and safety warnings so that understanding operation of the laminator is "intuitive" and not language dependent.
- Slitters. Experts know the value of slitters for laminating a quantity of same-size sheets. The slitters remove the side scrap from both sides of each sheet as it goes through the laminator. This greatly reduces the amount of time required for trimming.
- Glitch-proof threading. Threading can be the most difficult aspect of using a laminator, so the Premier 4 has built-in threading aids. The top idler is guarded from the top heat shoe for safety and easy threading. The bottom idler is attached to the feed tray. Once the upper and lower webs of film have been run through the machine, bottom idler threading is automatic when the operator puts the feed tray on the machine.
Part #: 4025110-A -
GBC 3-5-7 Round Hole Looseleaf USP13 Die Set (0312190100)
- Type: GBC / Sickinger USP13 Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: 3-5-7 Round 5/16"
- Pitch: n/a
- Hole Shape: Round
Part #: 0312190100 -
GBC ColorCoil 5:1 Pitch Die Set for USP13 (0312011500)
- Type: GBC / Sickinger USP13 Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC ColorCoil
- Pitch: 5:1 Pitch
- Hole Shape: Round
Part #: 0312011500 -
GBC VeloBind Die Set for USP13 (0314280000)
- Type: GBC/Sickinger USP13 Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC Velobind
- Pitch: 1" On Center
- Hole Shape: Round
Part #: 0314280000 -
Formax Paper Folder with Touch Screen (FD-346)
- Color Touchscreen Control Panel: Graphics-based and designed for easy, walk-up use.
- Fast Processing: Large jobs are processed quickly at speeds of up to 15,500 pieces per hour.
- Drop-In Feed System: Three roller drop-in feed system produces dependable feeding of forms with no fanning required.
- Adjustable Stacker Wheels: Stacker wheels can be manually adjusted to neatly and sequentially stack different paper sizes and fold types.
- Telescoping Conveyor System: Conveyor can be set between 14" (356mm) and 36" (915mm) in length and holds up to 500 folded pieces.
Part #: FD-346 -
Foster On-A-Roll Lifter Low Profile Grande Max (61546)
- Designed to handle large diameter, heavy rolls that require lower clearances.
- Front caster wheels are fixed to allow the front to fit under tight areas.
- Lets one operator move rolls as heavy as 2,200 lbs
- Pair of heavy-duty rear swivel casters with easy step-on locking brake.
- Specially designed tray for easy loading and unloading rolls.
Part #: 61546 -
HSM Pure 830c Level P-4 Cross Cut Paper Shredder (HSM2383)
- Made for office use by 6 to 11 users.
- High quality materials and "Made in Germany" quality for security and durability.
- Cutting rollers made of hardened steel with lifetime warranty.
- Power motor allows for continuous operation.
- Quiet operation minimizes noise development in the workplace.
Part #: HSM2383 -
James Burn Lhermite AlphaDoc MK3 13" Punch - 2:1 Square Hole Wire Die Set (04ALPHADOC21)
- Type: Alpha-Doc MK3 Interchangeable Die Set
- Punching Pattern : 2:1 Pitch
- Hole Shape: Square
- Hole Size: 6mm
- Part Number: 04ALPHADOC21
Part #: 04ALPHADOC21 -
GBC TL2900 Modular 12" Electric Wire Closer (7301200)
- Electric binding increases productivity with a quality crimp in 1 second.
- Wire hooks provide a single-position load and crimp station for both 3:1 and 2:1 Twin Loop wire, eliminating movement of the document to a separate closing station.
- Single adjustment knob provides one-step size adjustment and precision binding.
- Dual activation buttons are designed to prevent misuse.
- Four LED's guide the user easily through the binding process.
Part #: 7301200 -
MBM 307A Automatic Tabletop Paper Folding Machine - Open Box (MYR-18-182-8)
- Three roller friction feed system
- Pre-programmed with 6 standard folds
- Stores 18 custom folds in memory
- Control panel includes LED four digit counter with batch and total functions
- Test button folds 2 sheets for inspection
Part #: MYR-18-182-8 -
Royal Sovereign 98" Wide Format Electric Trimmer (RET-2502)
- Fast cutting with up to 6.6ft/sec blade speed.
- Long activation bar running the length of the unit .
- Included foot pedal for hands-free operation.
- Open back design for trimming longer prints .
- Bidirectional self-sharpening rotary blade .
Part #: RET-2502 -
GBC ColorCoil 3.2:1 Pitch Die Set for USP13 (0314200000)
- Type: GBC/Sickinger USP13 Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC ColorCoil
- Pitch: 3.2:1 Pitch
- Hole Shape: Round
Part #: 0314200000 -
Challenge 2026A 20" x 26" Combination Flat/Tilt Paper Jogger (CH-2026A)
- Mechanical jogging action providing an efficient process
- Manual and automatic operation option, machine or foot dial
- 60 degrees table tilt control ensuring a great productive system
- Included: (1) 12 foot electrical cord & tools.
- Mechanical jogging action providing an efficient process
Part #: CH-2026A -
Swingline CX22-44 TAA Compliant Cross-Cut Shredder - 1758582B (SWI-1758582)
- TAA Compliant; made in Germany
- Cross-cut shredder meets everyday security needs (Level P-3)
- Shreds up to 22 sheets at a time
- 44-gallon pull-out waste bin with bin full indicator
- Extra-wide 15" paper entry facilitates shredding of large format sheets
Part #: SWI-1758582 -
Powis Parker Fastback Scoring/Creasing Machine (PPSM)
- Transparent die guide lets you see where each score goes
- Patented Centering Guide eliminates any guesswork from the process
- No make-ready is required
- Interchangeable dies let you choose between single and double scores
- Ergonomic design helps avoid work-related injuries
Part #: PPSM -
James Burn EX380 / EPX700 3:1 Round Hole Wire Die Set (04JBEX38031R)
- Type: EX380 / EPX700 Interchangeable Die Set
- Punching Pattern: 3:1 Pitch Wire
- Hole Shape: Round
- Hole Size: 4mm
- Usage: For Wire-O documents from 1/8" to 1/2"
Part #: 04JBEX38031R -
James Burn Lhermite DocuPunch 3:1 Square Hole Wire Die Set (04DOCUPUN31S)
- Type: DocuPunch Interchangeable Die Set
- Punching Pattern : 3:1 Pitch
- Hole Shape: Square
- Hole Size: 4mm
- Part Number: 04DOCUPUN31S
Part #: 04DOCUPUN31S -
Plastikoil PBS TCB Dual Sided Crimping Unit (PBS-TCB)
- No tools required for size changeovers.
- Accommodates coil diameters from 6 mm to 50 mm without the need to change crimp heads.
- Min/Max binding edge 5.5" ? 17" (14 cm ? 43 cm)
- Easy to follow decals guide the operator through setup.
- Removable off-cut tray makes accumulation and disposal of off-cuts neat and tidy.
Part #: PBS-TCB -
Challenge 2840A 28" x 40" Combination Flat/Tilt Paper Jogger (CH-2840A)
- Mechanical jogging action
- Dual switch for manual and automatic operation
- Tilting control of up to 60 degrees
- Included: (1) 12 foot electrical cord and tools
- Mechanical jogging action
Part #: CH-2840A -
GBC 4:1 WireCoil Die Set for USP13 (0312020700)
- Type: GBC / Sickinger USP13 Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: Wire Coil
- Pitch: 4:1 Pitch
- Hole Shape: Round
Part #: 0312020700 -
Afinia Label UW300 Unwinder & RW300 Rewinder for L801 Label Printer (AFN26674)
- Use uprated motors to ensure that heavier rolls can be handled with ease.
- The RW300’s user-controlled clutch allows for roll tension to be adjusted easily, allowing narrow labels to be rewound precisely without excessive tension that normally causes print errors.
- The maximum roll diameter of 300mm allows for a longer uninterrupted workflow, delivering labels directly onto a roll ready for application.
- Can be used independently or as a complete roll to roll system.
- Maximum Roll OD: 11.8" (300mm)
Part #: AFN26674 -
Heavy Duty Electronic Table-Top Slot Punch with Centering Guides (3943-1600)
- Type: Heavy Duty Electronic Slot Punch
- Slot Size: 1/8" x 9/16" (3mm x 14.3mm)
- Centering Guides: Yes
- Construction: Steel
- Application: Industrial
Part #: 3943-1600 -
Fellowes Powershred 485Ci Cross Cut Paper Shredder (38485)
- 100% Jam Proof System eliminates paper jams.
- Auto-Oil automatically lubricates the cutters.
- Patented SafeSense Technology stops shredding when hands touch the paper opening .
- 120V machine.
- 5/32-Inch x 1-1/8-Inch cross-cut particles (Security Level P-4).
Part #: 38485 -
HSM Securio P40s 1/8" Strip-cut 45-47 Sheet Shredder - HSM1880 (HSM-1880)
- Made in Germany. The high quality materials and proven HSM "Made in Germany" quality guarantee you are receiving a safe and durable machine – and also 3 years warranty.
- Solid steel cutting rollers with lifetime warranty. The induction-hardened, solid steel cutting rollers with a lifetime warranty can easily cope with staples and paper clips and guarantee durability.
- Drive and operating concept IntelligentDrive. The innovative drive and operating concept IntelligentDrive offers an increase in performance of up to 40 %. One of three operating modes can be selected as required: silent for particularly quiet operation, standard with an optimum throughput rate and low noise level and performance for maximum cutting and throughput performance.
- Operation via touch display. Intuitive operation and multi-language menu selection via the high resolution 4,3" touch display. Relevant information such as operating modes and status reports are displayed. Consumable material, machine and contact details can be called up.
- Intelligent paper jam prevention. Due to the intelligent paper jam prevention feature, the system recognises automatically and quickly whether too much paper has been fed in. The machine goes into reverse or increases the power temporarily and pulls the paper in.
Part #: HSM-1880 -
Rhin-O-Tuff Medium Duty Electric ProClick Punch System (4012PC)
- Die with easy disengageable pins - Included
- P75 ProClick spine opener/closer - Included
- Automatic and Manual Reverse feature to reduce jamming in the punch
- Punches up to 30 sheets or 60 pages of 20 lb paper
- Rate of 25 cycles per minute
Part #: 4012PC -
Formax FD 8400HS High Security Level 6 Paper Shredder with Auto Oiler (FD8400HS-1)
- Evaluated by NSA: Meets the requirements of NSA/CSS specifi cation 02-01 for Level 6 High-Security cross-cut paper shredders
- Auto Start/Auto Stop: Optical sensor detects paper and starts operation automatically
- Door Safety Sensor: Motor stops automatically if cabinet door is opened
- Auto Reverse: In case of paper jam, built-in controls switch motor into reverse to clear jam
- Heat-treated steel cutters are specially ground for longevity and require minimal oil
Part #: FD8400HS-1 -
Safety Speed H5 Full-Sized 64" Vertical Panel Saw (SS-H5)
- 3 1/4 Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 3/4" steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
Part #: SS-H5 -
HSM 390.3 Level P-7 High Security Cross-Cut Shredder with Auto Oiler (HSM16604)
- Cutting type: Cross Cut
- Cutting size: 1/32" x 3/16"
- Security level: 6
- Security levels DIN 66399: P-7 (Old level 6)
- Cutting capacity: 10 - 12 sheets
Part #: HSM16604 -
Challenge 2436A 24" x 36" Combination Flat/Tilt Paper Jogger (CH-2436A)
- User friendly and simple dual switch operation
- Quick mechanical jogging action
- Flat or tilt in a perfect 60 degrees table control for a perfect stack
- Included: (1) 12 foot electrical cord & tools.
- User friendly and simple dual switch operation
Part #: CH-2436A
