Need Help 1-800-944-4573 1-800-944-4573

Product listing: GBC Arctic Matte 51" x 150' (3" Core) - GBC (9300834)   to   HSM Securio C18c Level P-4 Cross Cut Office Shredder - Security Level (HSM-1913)

  1. GBC Arctic Matte 51" x 150'

    Part number: 9300834

    • Film Type: GBC Arctic Matte Thickness: 3mil Roll Width: 51inch Roll Length: 150feet Film Finish: Matte Core Size: 3inch GBC Part Number: 9300834 , G9300834

    List Price: $659.20

    Your Price: $476.09

    You Save: 27%

  2. Mandelli Miracle 107 LMM 105 42" Cut Replacement Blade

    Part number: JH-42330

    • Compatible Models: Mandelli, Miracle 107, LMM 105 Material: Standard Inlay Holes: 9 Length: 50.394inch With: 4.724inch Thickness: 0.433inch Notes: 42inch Cut Part Number: JH-42330 , 42330 , KN42330

    Your Price: $475.89

  3. Harris Macey Omni Double Cut C-635-0-1046 HCHC Replacement Blade

    Part number: JH-42004HCHC

    • Type of Blade: High Carbon High Chrome Dimensions (L x W x T): 14.250inchx3.750inch x .250inch Holes/Slots: 5S

    Your Price: $474.89

  4. Drytac MHL Matt UV 3mil 61" x 500' Low Temp Thermal Laminating Film - Low Melt

    Part number: MM61503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    Your Price: $472.60

  5. Rotatrim 36" Professional Rotary Cutter - Foster Keencut

    Part number: 60150

    • Steel end castings are mounted to a high density laminated particleboard with screen printed grid in inches and metric.
    • 36" rule supplied with adjustable squaring arm.
    • 5 Year full warranty.
    • Self-sharpening tungsten steel cutting blade for clean cuts every time.

    List Price: $575.00

    Your Price: $473.53

    You Save: 17%

  6. Xyron 4400 Laminate / High Tack Adhesive 38" x 300' - Laminating Cartridges

    Part number: LAT3801-300

    • Roll Set Type: One Side Laminate / One Side High Tack Adhesive
    • Width: 38"
    • Length: 300'
    • Part Number: LAT3801-300

    List Price: $718.00

    Your Price: $472.41

    You Save: 34%

  7. 1.3mil Matte Nylon Digital Lay Flat Laminating Film - 24.5" x 1000'

    Part number: CBDLF132451000DM-1

    • Film Type: Nylon Digital Lay Flat Laminating Film Thickness: 1.3Mil Roll Width: 24.5inch Roll Length: 1000feet Film Finish: Matte Core Size: 2.25inch Part Number: CBDLF132451000DM-1

    Your Price: $473.29

  8. MBM Triumph Replacement Blade for 6550 6550EC 6550EP

    Part number: MB-0656

    • Compatible Cutters: MBM Triumph 6550 , 6550EC , 6550EP Length: 29 11/16inch Part Number: MB-0656

    Your Price: $471.76

  9. Lawson Wohlenberg 88T A86 A90 Metric Replacement Blade

    Part number: JH-38560M

    • Compatible Models: Lawson, Wohlenberg 88 T, A 86, A 90 METRIC Material: Standard Inlay Holes: 10 (M12x1.75) Length: 42.126inch With: 4.921inch Thickness: 0.472inch Notes: Part Number: JH-38560M , 38560M , KN38560M

    Your Price: $471.69

  10. Polar 71 72C 75 High Speed Steel Replacement Blade

    Part number: JH-43250HSS

    • Compatible Models: Polar 71, 72C, 75 Material: High Speed Steel Holes: 12 Length: 34.173inch With: 4.094inch Thickness: 0.381inch Notes: Part Number: JH-43250HSS , 43250HSS , KN43250HSS

    Your Price: $471.69

  11. Polar 76EL High Speed Steel Replacement Blade

    Part number: JH-43700HSS

    • Compatible Models: Polar 76 EL Material: High Speed Steel Holes: 14 Length: 36.417inch With: 4.33inch Thickness: 0.382inch Notes: Part Number: JH-43700HSS , 43700HSS , KN43700HSS

    Your Price: $471.69

  12. Wohlenberg Wohl A86 88T A90 Replacement Blade

    Part number: JH-38560

    • Type of Blade: Standard Inlay Dimensions (L x W x T): 42.126inchx4.921inch x .472inch Holes/Slots: 10H

    Your Price: $471.69

  13. GBC / Swingline CombBind C210e Electric Comb Binding Machine

    Part number: 7708175

    • 330 sheet binding capacity.
    • 20 sheet punch capacity.
    • For letter size documents.
    • Accommodates oversize covers.

    List Price: $774.35

    Your Price: $471.24

    You Save: 39%

  14. Drytac Protac High Gloss UV 5.0mil 38" x 150' PS Overlaminate - Pressure Sensitive

    Part number: PLHG3385

    • Film Width: 38"
    • Film Length: 150'
    • Film Thickness: 5.0mil
    • Core Size: 3"

    Your Price: $470.20

  15. Custom Printed Index Tabs - 17 Tabs Per Set

    Part number: CUSTOMTABS17

    • Paper Stock: 90# White (also Typsetting: Standard styles Size: Letter, Legal or Half Letter (You Choose) Orientation: Available in Landscape or Portrait Mylar Color: Clear or Assorted available Collated: Yes Drilling: Available upon request Cut: 1/17Cut (1 Bank of 17 tabs) Quantity: Choose above Part Number: CUSTOMTABS17

    Your Price: $471.19

  16. Tamerica OfficePro-21E Plastic Comb Binding Machine

    Part number: tofficepro21e

    • Binding Capacity: 2inch Punching Capacity: 20sheets (20#) Punching Length: 11.7inch (A4) Punching Format: Electric Binding Format: Manual Hole Pith: 14.3mm Hole Spec: 3x8mm Depth Margin: 2.5 - 6.5mm Punch Holes: 21 Power Supply: 110V/60Hz Machine Dimensions: 18.1inchx11inch x 9inch Weight: 37.4 lbs Warranty: 1Year Manufacturer Warranty Part Number: tofficepro21e

    List Price: $865.00

    Your Price: $469.00

    You Save: 45%

  17. GBC Arctic Gloss 51" x 150

    Part number: 9300815

    • Film Type: GBC Arctic Gloss Thickness: 3mil Roll Width: 51inch Roll Length: 150feet Film Finish: Gloss Core Size: 3inch GBC Part Number: 9300815 , G9300815

    List Price: $540.80

    Your Price: $469.89

    You Save: 13%

  18. GBC Arctic Lustre 55" x 150'

    Part number: 9300827

    • Film Type: GBC Arctic Lustre Thickness: 3mil Roll Width: 55inch Roll Length: 150feet Film Finish: Lustre (Semi-Gloss) Core Size: 3inch GBC Part Number: 9300827

    List Price: $704.97

    Your Price: $469.89

    You Save: 33%

  19. Muller Martini 301 304 361 Top Front HSS Replacement Blade

    Part number: JH-42594HSS

    • Compatible Models: Muller Martini 301, 304, 361 Material: High Speed Steel Holes: 8 Length: 21.654inch With: 3.74inch Thickness: 0.315inch Notes: Top Front Part Number: JH-42594HSS , 42594HSS , KN42594HSS

    Your Price: $469.59

  20. Drytac MediaShield Heatset Matte UV 4mil 25.5" x 328' Overlaminate

    Part number: MT25328

    • MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.

    Your Price: $469.50

  21. 1.2mil Gloss Low Melt Laminating Film - 38" x 3000'

    Part number: CBD12G383000-3

    • Film Type: Premium Low Melt Thickness: 1.2Mil Roll Width: 38inch Roll Length: 3000feet Film Finish: Gloss Core Size: 3inch Operating Temperature: 220 Degrees Part Number: CBD12G383000-3 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

    Your Price: $469.09

  22. Akiles CoilMac ER+ Plus Oval Hole Coil Binding Machine with Inserter

    Part number: Coilmac-ER+

    • Extended Single Punching Length (13") : With open ends & continuous punch guide to easily punch documents of any length (up to 26").
    • High Volume Punch Capacity : Suggested up to 20-sheet* for 20 lbs paper, or 2.6mm (28-sheet equivalent)** for hardboard, in 13" length (53 holes).
    • Super Strength Punch Mechanism with exclusive "Precision Guiding SystemTM" Blade Set : Cast-hardened & heat-treated steel dies provide superior strength & hardness. Exclusive "precision guiding system" guarantees a sharp & clean perforation everytime.
    • Top Electric Roller Coil Inserter (Foot Pedal Operated) : This easy to use and durable roller makes coil inserting surprisingly fast and easy. It is strategically placed on the left side of the machine so your coil will clear the punch handle while you are inserting.

    List Price: $824.00

    Your Price: $469.00

    You Save: 43%

  23. 5mil Gloss Low Melt Laminating Film - 36" x 1000'

    Part number: CBD5G361000-3

    • Film Type: Premium Low Melt Thickness: 5Mil Roll Width: 36inch Roll Length: 1000feet Film Finish: Gloss Core Size: 3inch Operating Temperature: 220 Degrees Part Number: CBD5G361000-3 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

    Your Price: $468.99

  24. Swingline GBC C340 Plastic Comb Binding Machine

    Part number: 7709000A

    • Bind up to 500 sheets using CombBind® spines
    • 25 sheet punch capacity. Unique, gravity fed, low force paper punching makes binding documents easier and faster than ever before.
    • Accommodates letter and oversized documents
    • 2" maximum spine size

    List Price: $834.02

    Your Price: $468.73

    You Save: 43%

  25. GBC Arctic White Mount 43" x 150'

    Part number: 9300905

    • Film Type: GBC Arctic White Mount Thickness: n/a Roll Width: 43inch Roll Length: 150feet Film Finish: n/a Core Size: 3inch GBC Part Number: 9300905

    List Price: $764.04

    Your Price: $467.89

    You Save: 38%

  26. 26 Bit PVC Proximity Cards with Mag Stripe - 100pk

    Part number: MYIDBPROX26H

    • Formatted as standard 26 bit rate High Coercivity magnective stripe. Card Size is credit card size or CR-80 Quantity of 100 cards per pack. MyBinding Part Number MYIDBPROX26H

    Your Price: $466.39

  27. 10mil Matte-Matte 12" x 18" Large Menu Laminating Pouches - 100pk - Matte Writable Pouches

    Part number: LKLP10LGMENUMM

    • Type: Matte Writable Laminating Pouch Size: Large Menu / Full Double Letter (12inchx18inch ) Finish: Matte Matte (Matte Front & Matte Back) Thickness: 10mil Quantity: 100 Per Box (2 Carriers Included) Corners: Round (1/8inch radius) Part Number: LKLP10LGMENUMM

    Your Price: $465.29

  28. Keencut 44" Simplex Sheet Material Cutter - Foster

    Part number: 60455

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.

    Your Price: $463.50

  29. 5mil Matte Digital Ultra Grip Laminating Film - 18" x 1000'

    Part number: CBDUG5181000M-03

    • Film Type: Digital Ultra Grip Laminating Film Thickness: 5Mil Roll Width: 18inch Roll Length: 1000feet Film Finish: Matte / Satin Core Size: 3inch Part Number: CBDUG5181000M-03

    Your Price: $464.39

  30. HSM Securio C18c Level P-4 Cross Cut Office Shredder - Security Level

    Part number: HSM-1913

    • Made in Germany: All HSM Classic & Securio Models are Made in Germany. Precision Engineering. TAA Compliant.
    • Solid Steel Cutting Cylinders: Cutting Heads are Manufactured from 100% Steel. Maintains High Cutting Capabilities While Using Less Energy. V-groove Technology Ensures Precise Cutting.
    • Cutting Cylinder Lifetime Warranty: Lifetime Warranty on Solid Steel Cutting Cylinders. Patented "V-Tek" Cutting Groove Technology. Higher Cutting Capacity. Lower Power Requirements.
    • Anti-Jam Technology with Reverse Function: Prevents Jams When Machine is Overloaded. Increasing Productivity. Saves Unanticipated Repair Costs.

    List Price: $1,008.68

    Your Price: $464.19

    You Save: 53%

Page:   1   10   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   50   60   70   80   90   100   110   120   130   200   300   306