Product listing: GBC AP2 Ultra VeloBind Die Set (0177499400) to Dahle CleanTec Level P-4 Oil-Free Cross-Cut Department Shredder (51514)
-
GBC AP2 Ultra VeloBind Die Set (0177499400)
- Type: GBC AP2 Ultra Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC Velobind
- Pitch: 1" On Center
- Hole Shape: Round
Part #: 0177499400 -
James Burn DocuPunch MINI 3:1 Square Hole Wire Die Set (04JBDOCUM31S)
- Type: DocuPunch MINI Interchangeable Die Set
- Punching Pattern: 3:1 Pitch Wire
- Hole Shape: Square
- Hole Size: 4mm
- Usage: For Wire-O documents from 1/8" to 1/2"
Part #: 04JBDOCUM31S -
Keencut 144" Evolution-E2 Precision Cutter (60390)
- Single handed positions, cutting, and clamping.
- Straight and accurate cuts to within 0.008" by adjustable levelers.
- Integral extruded alloy cutting base.
- 5 year general warranty on all parts (except blades).
- 20 year warranty on cutting bearings.
Part #: 60390 -
Drylam School-Lam 27" Complete School Laminator System (DL-20013)
- Laminates up to 27" wide.
- Fixed speed at 5' per minute
- Uses school grade films , including GBC NAP LAM I
- 1.5 mil and 3.0 mil
- Hand held slitter with convenient storage on the machine
Part #: DL-20013 -
Plastikoil PBS 2300 Coil Inserter and Crimper (PBS-2300)
- No tools required for basic setup and changeover.
- Small and compact, it can fit on any desk or countertop.
- Consistent crimping. Uses the same patented crimping technology as Gateway’s TCB - Total Cut & Bend.
- The front alignment channel curves the book to follow the curve of the coil allowing for easier coil insertion.
- Large top surface can be used as a workspace or as a location for a punch machine.
Part #: PBS-2300 -
Royal Sovereign Commercial Grade School Laminator Starter Kit with 4 Rolls of Film and Optional Work Station (RSL-ALEXIS-K)
- Laminating speed of up to 8.2 feet per minute
- Takes only 10 minutes to heat up & be ready to laminate
- Silicone rubber rollers to be easily cleaned & maintained
- School laminating film 1.5 or 3 mil
- Reverse function to clear up jams
Part #: RSL-ALEXIS-K -
Therm-O-Type Foil Fusing Starter Kit with 2 Foil Colors and Optional Foil Cutter & Work Station (TOT-FT10-K)
- Category: Foiling Machines >> Finishing Equipment >> Starter Kits
- Manufacturer: MyBinding
Part #: TOT-FT10-K -
James Burn Lhermite AlphaDoc MK4 14" Punch - 3:1 Round Hole Wire Die Set (04ALPHAMK431R)
- Type: Alpha-Doc MK4 Interchangeable Die Set
- Punching Pattern : 3:1 Pitch
- Hole Shape: Round
- Hole Size: 4mm
- Part Number: 04ALPHADOC31R
Part #: 04ALPHAMK431R -
GBC AP2 Ultra 2-4 Round Hole 1/4" Looseleaf Die Set (0177498800)
- Type: GBC AP2 Ultra Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: 2-4 hole 1/4"
- Pitch: n/a
- Hole Shape: Round
Part #: 0177498800 -
GBC AP2 Ultra 2-4 Round Hole 5/16" Looseleaf Die Set (0177499600)
- Type: GBC AP2 Ultra Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: 2-4 hole 5/16"
- Pitch: n/a
- Hole Shape: Round
Part #: 0177499600 -
GBC AP2 Ultra 3-5-7 Round Hole 5/16" Looseleaf Die Set (0177498000)
- Type: GBC AP2 Ultra Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: 3-5-7 Round 5/16"
- Pitch: n/a
- Hole Shape: Round
Part #: 0177498000 -
GBC Die Sets for AP2 Ultra Punch (GBCAP2DS)
- Type: GBC AP2 Ultra Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: Varies
- Pitch: 9/16" Pitch
- Hole Shape: Rectangle
Part #: GBCAP2DS -
HSM ProfiPack C400 Tabletop Cardboard Shredder (1528)
- Hardened cutting rollers for ripping through one layer of tough cardboard while conveniently resting on your tabletop.
- Specially shaped cutting rollers guarantee even, optimum padding of the material.
- Continuous Duty Operation ensures continual shredding with no down time.
- Sturdy sheet steel housing is ideal for use in dispatch and warehouse areas.
- Thermal fuse to protect against overheating.
Part #: 1528 -
Model 479 Foot-Operated Grommet Press (GM479)
- Offering increased productivity over the Model 405.
- Foot-operated hand-fed grommet machine
- Heavy duty cast iron frame
- Comes standard with a 5/16" die.
- Offering increased productivity over the Model 405.
Part #: GM479 -
James Burn DocuPunch MINI Plastic Comb Binding Die Set (04JBDOCUMPB)
- Type: DocuPunch MINI Interchangeable Die Set
- Punching Pattern: 9/16" Pitch
- Hole Shape: Rectangular
- Hole Size: 8mm x 3mm
- Usage: For Plastic Comb
Part #: 04JBDOCUMPB -
Formax OnSite FD 8602sc Strip-Cut Paper Shredder - FD8602SC (FD-8602SC)
- Auto Start/Auto Stop: Optical sensor detects paper and starts operation automatically
- LED Control Panel with Load Indicator
- Door Safety Sensor: Motor stops automatically if cabinet door is opened
- Auto Reverse: In case of paper jam, built-in controls switch motor into reverse to clear jam
- Heat-Treated Steel Cutters: Specially ground for longevity and require minimal oiling
Part #: FD-8602SC -
James Burn Lhermite PB3300 3:1 Pitch Die Set with Thumb Cut (04JBP31SQTHM)
- Type: PB3300 Interchangeable Die Set
- Punching Pattern : 3:1 Pitch with Thumb Cut
- Hole Shape: Square
- Hole Size: 4mm
- Part Number: 04JBP31SQTHM
Part #: 04JBP31SQTHM -
Polar E 25" Electric Cold Mount Roll Laminator Starter Kit (CL25E-KIT)
- Starter Kit Includes:
- 25” Polar E Laminator
- Laminator Stand
- Image Edge 48" Foam Board Cutter
- 24" x 36" PSA Adhesive Foam Boards (10pk)
Part #: CL25E-KIT -
GBC HeatSeal H700pro Pouch Laminator (1700500)
- 4 rollers (hot rollers) laminate up to 18" wide, including .10" mounting boards.
- Formerly the GBC 4500 Pouch Laminator
- 4 heated rollers and 2 heated plates provide the highest quality lamination on the market.
- One-touch digital keypad with LCD readout.
- Adjustable temperature with cooling fans.
Part #: 1700500 -
Fellowes Powershred 425Ci Cross-Cut Shredder (38425)
- 100% Jam Proof System eliminates paper jams and powers through tough jobs.
- Designed and assembled in the USA and meets strict TAA guidelines.
- Auto-Oil automatically lubricates the cutters to enhance performance and extend shredder life.
- SafeSense Technology stops shredding when hands touch the paper opening.
- Energy Savings System provides optimal energy efficiency 100% of the time-in use and out of use.
Part #: 38425 -
Graphic Whizard PT 330 Mini Handfed Tabletop Creaser (PT 330-Mini)
- True die crease to eliminate toner cracking.
- Tabletop machine for ease of storage.
- Removable trays to save space.
- Keypad programming for efficient set-up.
- 1 year parts /electronics warranty.
Part #: PT 330-Mini -
James Burn Lhermite PB3400 3:1 Pitch Square Hole Die Set (04JBP340031SQ)
- Type: PB3400 Interchangeable Die Set
- Punching Pattern : 3:1 Pitch
- Hole Shape: Square
- Hole Size: 4mm
- Part Number: 04JBP340031SQ
Part #: 04JBP340031SQ -
Rhin-O-Tuff Onyx OD4012 11" Electric Punch (OD4012-ONYX)
- Automatic and Manual Reverse feature to reduce jamming in the punch
- Punches up to 30 sheets or 60 pages of 20 lb paper
- Rate of 25 cycles per minute
- Auto and manual reverse clears most punching jams
- Quick Change Die System with easy disengageable pins
Part #: OD4012-ONYX -
Therm-O-Type FT-10 Foil Fuser (TOT-FT10)
- Maximum Sheet Size: 12.6" Wide
- Maximum Foil Roll Size: 500' long foil roll wound on a standard 1" core
- Adjustable Speed: Yes
- Adjustable Temperature: Yes
- Core Size: 1"
Part #: TOT-FT10 -
Keencut Evolution3 124" SmartFold Cutter (61389)
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Swing-down under-bench storage to leave work surface clear.
Part #: 61389 -
Formax FD 8300HS Level 6 Cross-Cut Paper Shredder (FD8300HS)
- Meets the requirements of NSA/CSS specification for Level 6 Security shredding.
- LED control panel with digital load indicator.
- Compact design for under-desk operation.
- Auto Start/Stop for care-free use.
- Door Safety Sensor stops motor automatically if door is opened.
Part #: FD8300HS -
James Burn DocuPunch MINI 2:1 Square Hole Wire Die Set (04JBDOCUM21S)
- Type: DocuPunch MINI Interchangeable Die Set
- Punching Pattern: 2:1 Pitch Wire
- Hole Shape: Square
- Hole Size: 6mm
- Usage: For Wire-O documents from 1/8" to 1/2"
Part #: 04JBDOCUM21S -
Keencut Ultimat Futura 48" Mat Cutter (61312)
- Cutting head is mounted on roller bearings running on steel tracks.
- 20 year warranty on the bearings.
- Cuts up to 5mm thick semi-rigid substrates.
- Designed to cut bevels on 3.5mm thick conservation board.
- Easy to change blade cartridges mean switching between cutting different materials can be done in seconds.
Part #: 61312 -
Dahle CleanTEC 41334 Level P-7 Cross Cut High Security Paper Shredder (DA41334)
- Quality German engineering ensures precision, durability and silent operation
- Designed to shred up to 5 sheets at once. The 41334 offers quick and easy destruction of confidential materials.
- 10 1/4" Feed opening for easy shredding of letter and legal sized paper
- CleanTEC Filtration eliminates up to 98% of the fine dust particles produced, providing improved air quality and promoting a healthier work environment
- Safe Technology offers revolutionary Verbal and Contact Emergency Shutdown System. In an emergency, simply yell "Stop" or tap the top cover for immediate shutdown.
Part #: DA41334 -
Dahle CleanTec Level P-4 Oil-Free Cross-Cut Department Shredder (51514)
- CleanTEC Fine Dust Filtration
- Closed system collects up to 98% fine dust particles
- Provides cleaner, healthier work environment
- Oil-Free / Hassle-Free Shredding
- Maintains performance without the need for oil
Part #: 51514
