Product listing: GBC Arctic Textured Satin 3mil 51" x 150' (3247011) to 5mil Matte Low Melt Laminating Film - 25" x 1000' (3 Inch Core) (CBD5M251000-3)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. GBC Arctic Textured Satin 3mil 51" x 150' (3247011)

    • Film Type: GBC Arctic Textured Satin
    • Thickness: 3mil
    • Roll Width: 51"
    • Roll Length: 150'
    • Film Finish: Textured Satin
    Part #: 3247011

    $634.19

  2. SEAL 51" x 200' 2.75mil Print Mount Plus Pressure-Sensitive Mounting Adhesive (SPMP1347-1)

    • 2.75 mil solvent acrylic adhesive with clear polyester carrier and single release paper.
    • Perfect for mounting digital, photographic and reprographic prints to a variety of substrates including cardboard, foam board, wood, and plastic.
    • Provides a strong permanent bond and can be used in both indoor and outdoor applications.
    • Get 1 roll on every order.
    • 2.75 mil solvent acrylic adhesive with clear polyester carrier and single release paper.
    Part #: SPMP1347-1

    $634.00

  3. Luxor Black 18 Tablet and Laptop Computer Charging Cart (LLTP18-B)

    • Sleek and mobile unit capable of charging and securing up to 18 laptops or Chromebooks (sold separately).
    • Measures 25"W x 21.25"D x 39.75"H.
    • All steel construction.
    • Ventilated on all four sides allowing air to circulate freely through the unit.
    • Rack shelves are 20"W x 16"D with 12"H of top clearance.
    Part #: LLTP18-B

    $633.36

  4. Swingline DS22-19 Jam Free Departmental Strip-Cut Shredder - 1758595B (SWI-1758595)

    • Strip-cut shredder meets basic security needs (Level P-2)
    • Shreds up to 22 sheets at a time
    • 19-gallon pull-out waste bin with bin full indicator
    • Continuous duty run time lets you shred more paper faster
    • Ultra quiet (≤60dB) to ensure minimal disruption in the office environment
    Part #: SWI-1758595

    $633.00

  5. Formax Cut-True 13M 14.5" Tabletop Manual Paper Cutter (Cut-True-13M)

    • Guillotine cutter accurately cuts through paper stacks up to .75" high, up to 14.5" wide
    • LED Laser cut line for pinpoint accuracy
    • High-quality steel blade
    • Front and rear safety covers
    • Two-handed cutter arm and safety switch operation
    Part #: Cut-True-13M

    $632.00

  6. Mactac Permacolor ColorTrans Optically Clear 61" x 150' Perm/Rem Mounting Film (CT2261L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2261L150

    $631.90

  7. SealerSales 2.8mil 12" x 16" Shrink Bags for Meat and Cheese - 1250pk (MSB-1216-1250)

    • High clarity - co-extruded, multi-layered construction.
    • Meets FDA specifications for direct food contact.
    • Ideal for meat or cheese shrink wrapping.
    • Thickness: 2.8mil.
    • Size: 12" x 16"
    Part #: MSB-1216-1250

    $631.46

  8. SealerSales 2.8mil 8" x 14" Shrink Bags for Meat and Cheese - 2000pk (MSB-0814-2000)

    • High clarity - co-extruded, multi-layered construction.
    • Meets FDA specifications for direct food contact.
    • Ideal for meat or cheese shrink wrapping.
    • Thickness: 2.8mil.
    • Size: 8" x 14"
    Part #: MSB-0814-2000

    $631.36

  9. Mactac Permacolor Gemini XT 51" x 400' Opaque White Rubber Back Mounting Film (PP5051L400)

    • Features and Benefits:
    • High-tack, high-peel adhesions and high cohesive strength for quick adhesion
    • Good for low energy surfaces such as Sintra, plastic and styrene
    • Typical Uses:
    • General purpose mounting of digital images
    Part #: PP5051L400

    $631.09

  10. GBC / Swingline CombBind C450E Electric Comb Binding Machine (7709100A)

    • Includes a new "Document Separator" that divides your sheets into perfect groups ready for punching.
    • Has a new "Auto Centering System" that positions paper for perfect punching every time.
    • Uses push Button Electric Punching
    • Can punch up to 25 sheets of 20lb bond at one time.
    • Can bind books up to 500 sheets with a maximum thickness of 2"
    Part #: 7709100A

    $630.33

  11. Rotatrim 54" Professional Rotary Cutter (60170)

    • Steel end castings are mounted to a high density laminated particleboard with screen printed grid in inches and metric.
    • 54" rule supplied with adjustable squaring arm.
    • Free spare clear plastic clamp strip with each Professional Rotatrim.
    • 5 Year full warranty.
    • Self-sharpening tungsten steel cutting blade for clean cuts every time.
    Part #: 60170

    $630.00

  12. SealerSales 18" Foot-Operated Impulse Sealer w/ Sliding Cutter and Film Roller (WNR-450FC)

    • Ideal for high volume poly bag and other thermoplastic sealing.
    • Capable of 15-20 seals per minute.
    • Allows the user to keep both hands free for quicker and more accurate sealing.
    • Seal width – 5mm.
    • Can seal and cut materials up to 18” and 10 mil total thickness.
    Part #: WNR-450FC

    $629.88

  13. 10mil Gloss Low Melt Laminating Film - 38" x 500' (3 Inch Core) (CBD10G38500-3)

    • Film Type: Premium Low Melt
    • Thickness: 10 Mil
    • Roll Width: 38"
    • Roll Length: 500'
    • Film Finish: Gloss
    Part #: CBD10G38500-3

    $629.53

  14. Fellowes Powershred 125Ci Jam Proof Cross Cut Shredder (3312501)

    • Shreds 20 sheets of paper per pass into 397 (5/32 x 1-1/2” Security Level P-4) cross-cut particles for enhanced security on highly confidential documents to help keep your information safe. Also shreds staples, credit cards, paper clips, staples and junk mail.
    • Continuous duty motor for non-stop shredding allows you to finish shred jobs in one sitting.
    • Patented 100% Jam Proof System eliminates paper jams and powers through tough jobs for frustration-free shredding.
    • SafeSense Technology automatically disables shredder when hands touch the paper opening, helping to protect more than just your identity.
    • Large 14 gallon removable corrugate bin and LED bin-full indicator eliminates the need for frequent emptying with high-volume shred jobs.
    Part #: 3312501

    $629.50

  15. Mactac Permacolor ColorTrans Optically Clear 54" x 150' Perm/Self-Wetting Rem Mounting Film (CT2554W54L150)

    • Physical Properties Property Typical Values Test Method Thickness, inches (µm) Carrier plus adhesive Total product 0.0032 (81) 0.007 (178) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Glass - 30 minutes 4.6 (17.5) 1.0 (5.2) 5.2 (22.7) 1.0 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 300°F (-29° to 150°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Durability CT2500 will give satisfactory performance for up to 3 years outdoor. Indoor durability can be up to 20 years under standard conditions and with high quality printing inks.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    Part #: CT2554W54L150

    $628.29

  16. 1.2mil 12" x 2000' Silk Matte Soft Touch Thermal Laminating FIlm (3" Core) - 2 Rolls (SMN1202000)

    • Film Type: Soft Touch Matte Laminating Film
    • Thickness: 1.2 Mil
    • Roll Width: 12"
    • Roll Length: 2000'
    • Film Finish: Elegant Silk Matte
    Part #: SMN1202000

    $628.28

  17. Destroyit 2445 Level P-5 Cross-Cut Paper Shredder (DSH0065)

    • Solid Steel Cutting Shafts. High grade, hardened steel cutting shafts are milled in our Balingen factory and warranted for life.
    • Easy Switch. Multifunction control element uses optical signals to indicate operational status and functions as an emergency stop switch.
    • Patented Safety Shield. Electronically controlled, transparent safety shield keeps fingers out of the feed opening.
    • Environmentally Friendly Bin. Durable, lightweight shred bins can be used wit or without disposable bags.
    • Lead-Free Soldering. Only environmentally friendly, lead-free soldering is used in the production of our electrical components.
    Part #: DSH0065

    $628.00

  18. Rotatrim 42" Professional Rotary Cutter (60160)

    • Steel end castings are mounted to a high density laminated particleboard with screen printed grid in inches and metric.
    • 42" rule supplied with adjustable squaring arm.
    • 5 Year full warranty.
    • Self-sharpening tungsten steel cutting blade for clean cuts every time.
    • Unique twin-guide rail design and nylon bearings ensure silent, resistant-free and accurate cutting.
    Part #: 60160

    $626.99

  19. Drytac Protac Polycarbonate 15.0mil 38" x 75' Overlaminating Film (PPC38075-15)

    • Ideal for pop-up booths and exhibition back walls.
    • The scratch-resistant surface will ensure long lasting protection.
    • Combined with Drytac’s backing fi lms, Protac Polycarbonate will produce durable rollable graphic panels.
    • Size: 38" x 75'
    • Film: 15 mil Pebble Textured Velvet Matte Polycarbonate
    Part #: PPC38075-15

    $626.22

  20. Fastbind C400 Manual Creaser (FBC400)

    • Two Alignment Guides. Fastbind’s C400 is specially designed to crease soft book covers for perfect binding, spread prints for Fotomount binding and cards for on-demand publishing. With two alignment guides, you can make two different setups, for example, to fold a letter-size sheet along three lines, or the make the standard four creases for soft book covers.
    • Adjustable Creasing Power. Although manually operated, you can adjust the C400 to consistently give a deeper or shallower crease using the adjusters located under the creasing bar.
    • Manual Creasing Machine.
    • 1-4 Creases with One Setup.
    • Precise Creases.
    Part #: FBC400

    $626.05

  21. GBC Arctic Image Barrier 1 Mil 61" x 150' (3" Core) (3245218)

    • Film Type: GBC Arctic Image Barrier
    • Thickness: 1 Mil
    • Roll Width: 61"
    • Roll Length: 150'
    • Core Size: 3"
    Part #: 3245218

    $624.59

  22. Formax FD 300 Desktop Paper Folder - Open Box (MYR-18-148-8)

    • Compact Size: Ideal for small organizations / offices with folding needs.
    • Easy to Use: Quick set-up right out of the box, with simple push-button operation
    • Pre-Marked for Four Popular Folds: Letter "C", Accordion "Z", Half "V" and Double Parallel fold in 11" and 14" lengths
    • Speed: Folds approximately 123 sheets per minute
    • Paper Sizes: Up to 8.5" x 14"
    Part #: MYR-18-148-8

    $623.57

  23. SEAL 51" x 150' 3mil PrintGuard UV Satin Matte Heat-Activated Laminating Film (SPGUV2274)

    • Low-reflecting finish virtually eliminates glare while protecting prints from fading and handling.
    • Offers UV protection and is an excellent choice for wall mounted displays.
    • Constructed of a thin vinyl based film.
    • Low activation temperature (185-195° F) solvent adhesive for maximum flexibility and conforming properties.
    • Can be applied with any SEAL multi-temperature roller laminator.
    Part #: SPGUV2274

    $622.60

  24. Cardinal HOLDit! 8.5 x 5 Letter Pocket 1000pk (CRD-21170)

    • Color(s): Clear
    • Quantity: 1000
    • Size: 8 1/2" x 5"
    • Orientation: Top Load
    • Post-Consumer Recycled Content Percent : 0%
    Part #: CRD-21170

    $622.09

  25. HSM Pure 530 Level P-2 Strip Cut Paper Shredder (HSM2351)

    • High quality materials and "Made in Germany" quality for security and durability.
    • Cutting rollers made of hardened solid steel with lifetime warranty.
    • Powerful motor allows for continuous operation.
    • Quiet operation minimizes noise development in the workplace.
    • Low power consumption in standby mode.
    Part #: HSM2351

    $622.09

  26. SEAL 51" x 150' 2mil PrintGuard UV Gloss Heat-Activated Laminating Film (SPGUV2072)

    • Constructed with a high grade, ultra clear polyester film that features superb ultraviolet protection.
    • Low activation temperatures (185° F - 195° F) and an aggressive solvent acrylic adhesive.
    • Offers excellent UV protection and image enhancement with an ultimate gloss finish.
    • For use on a wide range of medias and display applications.
    • Can be applied with any SEAL multi-temperature roller laminator.
    Part #: SPGUV2072

    $621.05

  27. GBC Octiva 5mil 43" x 500' Lo-Melt 3/2 Gloss (3" Core) (3032028A)

    • Gauge: 5 mil
    • Roll Width: 43"
    • Roll Length: 500'
    • Core Diameter : 3"
    • Part Number: 3032028A
    Part #: 3032028A

    $620.99

  28. Drytac Protac High Gloss UV 5.0mil 51" x 150' PS Overlaminate (PLHG3515)

    • Film Width: 51"
    • Film Length: 150'
    • Film Thickness: 5.0mil
    • Core Size: 3"
    • Finish: Gloss
    Part #: PLHG3515

    $620.55

  29. 1.7mil Gloss Low Melt Laminating Film - 43" x 3000' (3 Inch Core) (CBD17G433000-3)

    • Film Type: Premium Low Melt
    • Thickness: 1.7 Mil
    • Roll Width: 43"
    • Roll Length: 3000'
    • Film Finish: Gloss
    Part #: CBD17G433000-3

    $620.36

  30. 5mil Matte Low Melt Laminating Film - 25" x 1000' (3 Inch Core) (CBD5M251000-3)

    • Film Type: Premium Low Melt
    • Thickness: 5 Mil
    • Roll Width: 25"
    • Roll Length: 1000'
    • Film Finish: Matte / Satin
    Part #: CBD5M251000-3

    $619.12

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   60   70   80   90   100   110   120   130   200   300   400   500   527