Product listing: Standard Perfect Binding Machine (BQ-160) to Baum 714XAPA Autofold Air Feed Tabletop Paper Folder (BAUM714XA)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Standard Perfect Binding Machine (BQ-160)

    • Easy Operation: Unlike other perfect binders, the BQ-160 requires little adjustment. A simple switch allows the operator to immediately select one of three binding modes: perfect binding with two way notching (for maximum book strength); perfect binding without notching (for very thin books); and padding. The notching, adhesive application and nipper clamping are all automatic. The only thing the operator needs to do is place a cover into position.
    • Precision Engineering: The superior design of the BQ-160 for the cut sheet market lets the operator produce big machine quality without the complication, noise and residual paper dust of bigger perfect binders. Since the on-demand market primarily uses cut sheets and requires a clean operating environment, the BQ-160 is uniquely designed to meet these needs. Its two way notching of the book block provides twice as many notches for maximum adhesive penetration --- creating not only an extra strong bind, but a cleaner, quieter operating environment.
    • Optimum Performance: Another unique feature of the BQ-160, commonly found on more expensive binders, is its dynamic nipper table which automatically senses and adjusts to the size of the book. This not only produces a strong, square bind every time, but simplifies operation as well. A cover detection sensor prevents the unit from cycling until a cover is positioned, minimizing waste and maximizing productivity. Whether you're looking to move up from a table-top binder, or want to bring your binding in-house to improve your turnaround and increase your profitability, the Standard BQ-160 Perfect Binder is the perfect choice.
    • Simple Operator Controls: With no complicated adjustments, the BQ-160's userfriendly design couldn't be easier.
    • Clean Operation: An efficient paper dust vacuum system keeps the environment clean and helps insure a consistently strong bind. An extra large paper dust bag is fully enclosed, but easily accessed and detached for cleaning and emptying.
    Part #: BQ-160

    $17640.00

  2. Vivid Matrix Omni-Flow Fully-Automated Deep Pile Feeder (MX-OMNI-FLOW)

    • Retrofits to all Matrix Pneumatic & Duplex Systems.
    • Quick & easy to set-up.
    • Fully automated lamination & foiling.
    • Change between paper stock in seconds.
    • Great for Use in: Digital print shops, Commercial printers, Copy and print shops, In-house print.
    Part #: MX-OMNI-FLOW

    $17500.00

  3. Royal Sovereign Rollover Classic 55" x 118" Flatbed Applicator for Mounting and Laminating (10314)

    • Key Features:
    • Ideal for rigid panel application and laminating digital prints.
    • Substrates up to 3.5 inches can be handled for perfectly flat applications without bubbles or creases.
    • Applying digital prints and other self-adhesive applications on rigid panels such as composite board, acrylic, aluminum etc., is just one of the areas where Rollover Classic reveals its excellent properties in results and operations.
    • Being able to comfortably operate the laminator with one hand while having free access to roller, media and tabletop, results in smooth and effective handling.
    Part #: 10314

    $17384.29

  4. Royal Sovereign Rollover Flexi 61" x 132" Flatbed Applicator for Mounting and Laminating (10315)

    • Key Features:
    • Comprising all the essential qualities of the existing line of Rollover Classic Flatbed Applicators
    • Offers quick dismantling to facilitate entering of premises having difficult access.
    • Having no overhead gantry above the roller, the access to media and substrates while working is superior.
    • Ideal for rigid panel application and laminating digital prints.
    Part #: 10315

    $17180.00

  5. Tec Lighting TruCoat 21" Hand-Fed UV Coater (TRUV-21D)

    • Apply gloss-satin and matte coatings.
    • Coat toner based, offset or inkjet with ease.
    • Quick change textured rollers for an array of finishes.
    • Speeds of up o 2,000SPH.
    • From start to coating in less than 5 Minutes.
    Part #: TRUV-21D

    $17066.00

  6. Morgana High-Production Booklet Maker (BM2000)

    • Air assist feeder unit.
    • Large LCD programmable display.
    • Up to 4000 sets per hour in collate mode.
    • Feed pre-collated sets from digital devices.
    • Convenient loading stapling head.
    Part #: BM2000

    $17011.00

  7. Formax HDD/SSD Hard Drive Shredder with Recording System (FD 87HDS-R)

    • Standard Features
    • Separate Shredding Chambers: Accommodate 3.5" HDD and 2.5" HDD & SSD drives
    • Recording System: Internal and external cameras for optimal security. System includes a 64GB SD card, a higher capacity SD card can be used for extended recording.
    • Hardened Solid Steel Cutting Blades: Specially ground for strength and durability
    • LED Control Panel: Provides centralized control and displays real-time status
    Part #: FD 87HDS-R

    $16995.00

  8. Formax High-Speed Digital Color Label Printer (ColorMaxLP2)

    • High-Speed Color Printing: Prints labels at up to 12 inches per second / 60 feet per minute
    • Inkjet Technology: Full-color CMYK printing with Memjet thermal technology
    • Intuitive Full-Color Touchscreen: The user-friendly interface allows operators to recall stored files, run and pause jobs, and perform maintenance operations
    • Memjet Print Head: Stationary print head features 70,400 ink nozzles and no moving parts for higher speeds and lower ink and maintenance costs
    • Professional Image Quality: Print resolution of up to 1600 x 1600 dpi produces exceptionally crisp text, barcodes, and images with vibrant color and deep black tones
    Part #: ColorMaxLP2

    $16995.00

  9. James Burn Table-Top Electric Automatic Coil Inserter and Crimper (KOILMATIC)

    • Comes Complete: - Set of 13 Spine Formers. - Photo Instruction Manual & Training DVD.
    • Productivity. Up to 450 books/hour
    • Coil Capabilities. 8 mm to 20 mm (1/8" to 5/8" book thickness)
    • Binding Edge Capabilities. 8.5" / 11" / A5 / A4.
    • Troubleshooting. Onboard electronic diagnostic capabilities.
    Part #: KOILMATIC

    $16990.00

  10. Morgana AutoCreaser Pro 50 High Speed Creasing Machine (AutoCreaser-Pro50)

    • 7" SmartScreen touch screen.
    • 27.5" x 19.6" sheet size.
    • Intuitive and easy to use.
    • Fully automatic.
    • Up to 16 creases per sheet.
    Part #: AutoCreaser-Pro50

    $16990.00

  11. Spiel Sterling Digibinder Plus SG Side Glue Automatic Perfect Binding Machine (DB-PLUS SG)

    • Auto Clamp. The clamp adjusts automatically between two sheets and 2 inches. Both the clamp and nipper are pneumatic, run by the supplied silent compressor.
    • Heavy Duty Notching. The Digibinder Plus sports our heaviest duty roughing blade, designed to grind deeper into the spine to facilitate the binding of problems stocks.
    • Waste Removal. The Digibinder Plus SG includes a vacuum waste removal system. This facilitates the ability to rough and notch deeper to maximize the strength of the book.
    • Side Gluing. The Digibinder Plus SG sports a separate side glue pot, allowing for greater side glue control for hinge covers.
    • Nipper Control. The distance that the nipper travels can be set to produce more square backed books. The dwell time can be set up to 3 seconds. The nipper height can also be adjusted.
    Part #: DB-PLUS SG

    $16950.00

  12. Graphic Whizard Wizard GW 12000 Number/Perf/Score/Slit Machine (GW12000)

    • 12,000 standard-size sheets per hour.
    • 100-job memory to store numbering jobs.
    • Up to 100 numbering positions per head per sheet.
    • Automatic feed; Optional "vertical" air feed available
    • 1-4 PNEUMATIC numbering heads; compressor required but not supplied.
    Part #: GW12000

    $16880.00

  13. Count Air Feed Knife Folder Add-On for Creasers (KF-250)

    • Only automatic stand-alone knife folder available.
    • Because it’s a stand-alone machine, it’s compatible with any existing creaser or multi-directional slitter/cutter/creaser.
    • Bottom vacuum paper feed with built-in register guide.
    • Paper feed stays aligned at all times with fixed, factory set registry guide.
    • Clear top lid provides visibility and easy internal access.
    Part #: KF-250

    $16795.00

  14. Graphic Whizard PT335 A+ Automatic Creaser (PT335-APlus)

    • Processes up to a maximum sheet size of 12.95" x 25.5" / 36.8 cm x 64.75 cm (39"/99.1 cm handfed).
    • Perform up to 16 creases per sheet!
    • Easy to replace front loading interchangeable crease/perf dies.
    • Up to 50 jobs can be stored into long-term memory.
    • Rotary perforation optional.
    Part #: PT335-APlus

    $16755.00

  15. Tec Lighting TruCoat 16" Hand-Fed UV Coater (TRUV-16D)

    • Apply gloss-satin and matte coatings.
    • Coat toner based, offset or inkjet with ease.
    • Quick change textured rollers for an array of finishes.
    • Speeds of up o 2,000 sheets per hour.
    • From start to coating in less than 5 Minutes.
    Part #: TRUV-16D

    $16755.00

  16. US Paper Counters Count-Wise M High Volume Paper Counter and Batch Tabber (CWM)

    • Applications:
    • Exact count deliveries.
    • Maximize efficiency.
    • Control quantity at every stage.
    • Fast, accurate tabbing.
    Part #: CWM

    $16749.00

  17. Deluxe Stitcher Multi-Head Wire Stitcher with G20 Stitch Heads (M27G20-AST)

    • Multi-head stitcher designed to accommodate both light and heavy-duty work
    • Stitch both flat and saddle
    • Accommodates the Side-Feed Style G20 Stitcher Head. Comes standard with two (2) G20 Stitcher Heads but replacement Heads can be added when an application requires it.
    • Stitch any thickness of stock from 2 sheets to 3/4”. When using 4 G20 heads, maximum stitching capacity is 1/2".
    • Up to four heads can be mounted along the machine’s 17" rail at a maximum distance of 13" between Heads.
    Part #: M27G20-AST

    $16720.00

  18. Formax 20.5" Hydraulic Programmable Guillotine Cutter (Cut-True 29H)

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut
    Part #: Cut-True 29H

    $16695.00

  19. Challenge Titan 200 20" Hydraulic Programmable Cutter with Light Beams (CH-TITAN200L)

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200L

    $16695.00

  20. MBM Triumph 6660 25-1/2" Automatic Programmable Cutter with VRCut Software (CU0492)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Easy-To-Use Touchpad The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0492

    $16499.00

  21. Formax Atlas C102 High-Speed Automatic Creaser/Perforator (Atlas-C102)

    • 7" Color touchscreen control panel.
    • Quick-Release Blade System
    • Height-adjustable Outfeed Stacker reduces unloading frequency.
    • Extended Infeed Deck handles sheets up to 35" x 13".
    • Fully automatic setup.
    Part #: Atlas-C102

    $16495.00

  22. Formax ColorMax 7 Digital Color Printer (COLORMAX7)

    • Latest in inkjet technology
    • Full Color CMYK output, up to 16.8 million colors
    • Full bleed capability on media up to 8.5" wide
    • Prints 1600 x 1600 dpi at 6 inches per second
    • Prints 1600 x 800 dpi at 12 inches per second
    Part #: COLORMAX7

    $16195.00

  23. GBC 5031 31" Automatic Cutter (1711987)

    • Speed: Up to 50 fpm
    • Weight: 220 lbs.
    • Power Requirements: 115 V, 2 A
    • Warranty: 90 days labor & 1 year parts
    • Safety Certification: C/UL listed
    Part #: 1711987

    $16116.01

  24. D&K Group &K Expression 44 Twin Laminator (EXP44)

    • Dimensions: 53"x62"x43"
    • Weight: Net 850 lbs
    • Electrical: 220V single phase 30 amps w/ neutral
    • Working Width: 43"
    • Maximum Temperature; 230F
    Part #: EXP44

    $15985.00

  25. Graphic Whizard Wizard CreaseMaster PLUS+ Pneumatic Creaser (CreaseMasterPLUS+)

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Inverted and regular impact creasing in the same pass!
    • Up to 10 impact creases per sheet.
    • Up to 20 jobs can be stored into memory.
    • Easy-to-use programming. Set up in minutes!
    Part #: CreaseMasterPLUS+

    $15965.00

  26. Paitec In-line Pressure Sealer (IM11500)

    • Integrates With a Variety of Printers.
    • Can Be Converted to Standalone Use.
    • Includes Vertical Stacker, Cabinet, and Stand.
    • Reverse Friction Infeed Rollers.
    • Multi Sensor Monitoring System.
    Part #: IM11500

    $15695.00

  27. GBC Spire III 64T 64" Wide Format Laminator (1737175)

    • Simple, intuitive control panel with LED pressure readout
    • Hand crank for opening and closing rollers provides an infinite choice of settings
    • Deep feed table makes feeding larger sheets effortless
    • 20 feet per minute laminating capability
    • Foot pedal for hands-free operation
    Part #: 1737175

    $15661.82

  28. GFP 65" Dual Heat Wide Format Roll Laminator (865DH-3R)

    • Dual heat for thermal and cold applications
    • Front/Rear Swing-out shafts
    • Labor saving swing-out 3" Quick-Grip supply shafts.
    • Two front rewind shafts allow thermal encapsulation of prints from a roll.
    • Drop-in Quick-Grip rewind shafts.
    Part #: 865DH-3R

    $15396.00

  29. MBM Triumph 5260 20-3/8" Automatic Programmable Cutter with VRCut Software (CU0489)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0489

    $15366.00

  30. Baum 714XAPA Autofold Air Feed Tabletop Paper Folder (BAUM714XA)

    • Capability to feed and fold 25.5 inch long paper for tri-folding brochures etc. (The 714XA is the only machine in this size and price range that can do this).
    • Multiple job memory of 20 custom entry folds with easy recall.
    • PLC touch screen control panel with color display and easy to follow pictographs.
    • Batch counter that can count up or count down.
    • BAUM Turbo Wheel air/vacuum feeding technology.
    Part #: BAUM714XA

    $15255.00

Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80   90   100   200   300   400   500   600   700   800   900   1,000