Product listing: Spiel Sterling Coilmaster Jr. TS Automatic Coil Binding Machine (SPL-CMJR-TS) to Morgana FSN Suction Feed Rotary Numbering Machine (65031)
-
Spiel Sterling Coilmaster Jr. TS Automatic Coil Binding Machine (SPL-CMJR-TS)
- It inserts plastic spiral from the first hole onwards, then cuts and crimps automatically.
- This tabletop unit is affordable and can bind books up to 20mm using coils between 8mm to 25 mm. Speeds of up to 600 books per hour can be attained.
- This plastic coil binder can bind books of any pitch, with round or oval holes.
- The touchscreen facilitates ease of use set up.
- The margins can be slim or wide, up to 3/8" / 9.5 mm, meaning that you can pull punch pins prior to punching, and center the sheet.
Part #: SPL-CMJR-TS -
Spiel Sterling Digibinder Plus Automatic Perfect Binding Machine (SPL-DB-PLUS)
- Auto Clamp. The clamp adjusts automatically between two sheets and 2.25 inches. Both the clamp and nipper are pneumatic, run by the supplied silent compressor.
- Roughing Blade. The unique roughing blade includes a serrated edge which can also hold up to six notching pins. This allows for maximum glue penetration and book strength.
- Side Gluing. The Digibinder side glues the rear of the spine by use of a side gluing pin. The book is then nipped in such a way that glue is forced into the front of the book creating a line of side glue there as well.
- Twin Glue Rollers. Two glue rollers saturate the spine with glue. A third metering roller smooths out the glue to the desired thickness.
- Nipper Control. The distance that the nipper travels can be set to produce more square backed books. The dwell time can be set up to 3 seconds. The nipper height can also be adjusted.
Part #: SPL-DB-PLUS -
Formax Atlas C102 High-Speed Automatic Creaser/Perforator (Atlas-C102)
- 7" Color touchscreen control panel.
- Quick-Release Blade System
- Height-adjustable Outfeed Stacker reduces unloading frequency.
- Extended Infeed Deck handles sheets up to 35" x 13".
- Fully automatic setup.
Part #: Atlas-C102 -
Formax 20.5" Hydraulic Programmable Guillotine Cutter (Cut-True 29H)
- Hardened Steel Blade: Designed for accurate cuts and long life
- Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier
- False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
- Touchscreen Control Panel: Easily set, adjust and program jobs
- LED Cutting Line: Bright red LED line indicates exactly where the blade will cut
Part #: Cut-True 29H -
Graphtec 24" x 36" Flatbed Vinyl Cutter and Plotter (FCX2000-60VC)
- Stronger Media Hold Down. Distance between the holes has been improved to 20 mm , as a result, FCX2000 Series provides stronger suction power to hold heavier and thicker medias down.
- Improved Vacuum Suction! holds media with the use of external electric vacuum pump. This is the preferred method for heavier and thicker media. The Redesigned Cutting Table has increased hold-down capability by its increased number of vacuum holes. This redesign is significantly valuable when cutting smaller objects that have less of surface area.
- Dual tool holder with 500 gf on tool 1 and 1,000 gf on tool 2
- Provided tools suitable for many applications.
- The FCX2000 series has 2 tool holder in the carriage.
Part #: FCX2000-60VC -
GFP 65" Dual Heat Wide Format Roll Laminator (865DH-3)
- Dual heat for thermal and cold applications
- Front/Rear Swing-out shafts
- Labor saving swing-out 3" Quick-Grip supply shafts.
- Two front rewind shafts allow thermal encapsulation of prints from a roll.
- Drop-in Quick-Grip rewind shafts.
Part #: 865DH-3 -
US Paper Counters Count-Wise I High Volume Paper Counter and Batch Tabber (CW1)
- Applications:
- Exact count deliveries.
- Maximize efficiency.
- Control quantity at every stage.
- Fast, accurate tabbing.
Part #: CW1 -
Morgana BM350 Hand-Fed Modular Booklet Maker (10206010)
- It can staple and fold up to 30 sheets of 80gsm paper, creating 140-page booklets
- Intuitive user interface.
- Patented folding mechanism provides a sharp professional finish.
- Book thickness measuring automatically sets the fold rollers.
- Heavy duty stapling heads with 5000 staple cartridge.
Part #: 10206010 -
Fastbind PUREVA XT Perfect Binder (FB-PUREVAXT)
- PUR & EVA Hot Melt binding in one machine.
- Produces hard and soft cover books in a variety of sizes and thickness.
- New dust free PGO Microcut spine roughening.
- Easy to use and low maintenance.
- Interchangable glue cartridges that allows you to easily change between PUR & EVA glues.
Part #: FB-PUREVAXT -
GBC Spire III 64T 64" Wide Format Laminator (1737175)
- Simple, intuitive control panel with LED pressure readout
- Hand crank for opening and closing rollers provides an infinite choice of settings
- Deep feed table makes feeding larger sheets effortless
- 20 feet per minute laminating capability
- Foot pedal for hands-free operation
Part #: 1737175 -
Fujipla Duo System Wide Format Laminator (LPV1200)
- Maximum Laminating Width: 47 inches
- Maximum Laminating Thickness: 1 inch
- Laminating Film Thickness: 1.2 - 10 mil
- Film Types: PSA and Thermal
- Temperature Range: Room Temperature to 270° F
Part #: LPV1200 -
MBM Triumph 6655 25.5" Electric Programmable Paper Cutter (MBM-CU0491)
- Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
- Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
- Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
- Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
- Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
Part #: MBM-CU0491 -
Revo -T14 12" Automatic Roll Laminator With Paper Feeder, Cutter and Stand Cabinet (RV-T14)
- Use as a desktop system or floor standing.
- Automatic paper feed, laminate and cut in one process.
- One button push start - will stop automatically when complete.
- Six roller system delivers consistent quality with four heated and two steel rollers.
- Simple access from top for easy film roll change and roller cleaning.
Part #: RV-T14 -
HSM V-Press 820 Plus Vertical Baling Press (HSM6143)
- State-of-the-art microprocessor controller and membrane keypad with LED display.
- Special retaining claws optimize the compression of the pressing material, increasing both loading volume and bale output.
- Quick and easy press assembly.
- Loading flap with hand wheel door lock.
- Color: Light Grey
Part #: HSM6143 -
Formax Medium Volume Standard Industrial Burster (FD 666)
- Paper weight: 100lb total, up to 4 parts (none exceeding 60lb tag stock)
- Speed: Variable, 30 -350 feet per minute
- Form Size: 2.375" -16"W x 2.75" -17"L (slitting) 2.375" -14.5"W x 2.75" ? 17"L (non-Slitting)
- Dimensions: 58" L x 41" W x 56.5" H with cabinet
- Weight: 352 lbs
Part #: FD 666 -
MBM Triumph 5260 20-3/8" Automatic Programmable Cutter with VRCut Software (CU0489)
- IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
- Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
- Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
- Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
- Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
Part #: CU0489 -
Ledco Heavy Duty 15" Roll Laminator with Automatic Feeder (HDF-15)
- HD 15 Features:
- Independent, intelligent heat controls display both set and actual temperature. Control microprocessor learns to anticipate the heat demand of each job and maintains within a few degrees of the set temperature.
- Driven, interchangeable silicone laminating and pull rollers provide superior release, high laminating quality, and easy cleaning while avoiding the wrinkling that can occur with only one driven roller.
- Built in retractable slitters save labor time by automatically trimming side scrap during the laminating process. Slitter head can be adjusted precisely and independently.
- Large film roll capacity.
Part #: HDF-15 -
HSM 40VL Baler for FA400 Shredders (HSM6111167)
- Automatically and economically compresses material into bales suitable for recycling.
- Ejection lever for quick and easy removal of baled material.
- Wear-free hydraulic system requires very little maintenance.
- Shredder/baler combinations are manufactured with dust-free connections.
- Easy to use control panel for a safe and efficient operation.
Part #: HSM6111167 -
Challenge Titan 200BC 20" Electric Paper Cutter with Light Beam (TITAN200BCLB)
- 20" Cutting Width, 3-1/4" Clamp Opening.
- Hydraulic Clamping & Cutting.
- Has laser light beams for safety that detect if anything is in the way
- Adjustable Clamp Pressure.
- Cutting Area Protection - Plexiglas Safety Shield.
Part #: TITAN200BCLB -
HSM FP3000 Barrel Crusher (HSM6820-FP3000)
- Low height and small footprint.
- Press ram with spikes for opening the barrels and collector tray for residual liquid.
- Enclosed on all sides with inspection window for safety and dust reduction.
- Membrane key-pad with LED for operator safety.
- Automatic return stroke saves time, overhead and personnel costs.
Part #: HSM6820-FP3000 -
Count AccuCreaser Air Modular Digital Creasing Machine (CATMDCM)
- Provides modes for creasing, perforating or feeding.
- Bottom vacuum feed with sheet spacing control.
- CAM actuated compression creasing ensures maximum crease accuracy.
- Automated distance recognition allows auto setups for your most common creases and corresponding folds, including perfect bind.
- Perform up to 4 perfs at a time (including micro perf).
Part #: CATMDCM -
Afinia Label s Tabletop Digital Label Finisher (DLF-140)
- Featuring ultra-precise cutting abilities, the DLF-140 easily produces beautiful full-bleed labels without a need for costly dies.
- A digital cut file guides the DLF-140’s plotter as it converts uncut, continuous-printed media to fully-finished labels.
- Has advanced plotter cutting technology that allows you to cut different types of material and shapes, on the fly, without the additional cost of dies.
- Equipped with a camera-based black mark registration system for pinpoint accuracy and consistency.This provides cutting speed optimization without synchronization issues.
- Input / Output Roll Diameter: 200mm (7.87")
Part #: DLF-140 -
SEAL 62 Base 61" Wide Format Heat Assist Roll Laminator (SEAL-62-Base)
- Heat assisted top roller for superb lamination performance.
- 61" working width to handle a wide range of media.
- Adjustable pressure and speed settings with maximum operating speed of 16.4’ft/min.
- 2" nip with manual adjustment suitable for working with a sled for road signs.
- Auto-grip shafts for user friendly webbing.
Part #: SEAL-62-Base -
GBC 620os-1 Automated Feeder (1880012)
- Capable to handle paper stock ranging from 80lb. text to 12 pt. cover stock
- Adjustable vaccum, air blast and separator fingers to prevent double feeding and miss feeding
- Adjustable magnetic side guides for easy set-up and perfect feeding
- Easy Laminator settings for length and overlaps
- Sheet feed counter tracks input
Part #: 1880012 -
Graphic Whizard Wizard PT375 A+ Automatic Creaser (PT375A+)
- Electrical: 220-240V 50/60Hz, 20A
- Speed: 4250 sph (based on 8.5" x 11" run landscape, 1 crease )
- Maximum stock size: 14.5" x 25.6" (36.8cm x 65cm)
- Minimum stock size: 4.75" x 3.25" (12.06cm x 8.25cm)
- Stock weight: 26# bond - 16 pt
Part #: PT375A+ -
Paitec IM9100 High-Volume Pressure Sealer (PIM9100)
- Integrates With a Variety of Printers.
- Can Be Converted to Standalone Use.
- Includes Vertical Stacker, Cabinet, and Stand.
- Reverse Friction Infeed Rollers.
- Multi Sensor Monitoring System.
Part #: PIM9100 -
Standard PF-40L Auto Suction Feed Tabletop Folder with Stand (PF-40L-MT-40L)
- Quick and Easy Setup. Simply select sheet size and fold pattern and each section sets-up automatically. The folder is equipped with 2 buckles to meet a variety of folds. Fine-tune adjustment can be done at 0.1 mm for accurate folding.
- Simple Operation Panel. User friendly operator console for easy operation and setting. Programming such as pre-set counting and job memory can be set-up for efficient production.
- High Performance Suction Rotor Feeding. Uniquely designed suction rotor feeding is employed to meet high speed production up to 390 sheets per minute, wide range of paper stock can be fed with ease.
- High Capacity Feeder. High capacity feed table (1,300 sheets of 64 gsm can be loaded) to minimize sheet loading during longer production runs.
- Crisp Tight Fold Quality. Crisp tight fold quality is ensured with uniquely designed combination of soft polyurethane foam rubber and steel rollers. Roller gap can be adjusted with a simple dial to fold thinner to thicker sheets.
Part #: PF-40L-MT-40L -
Paitec MX13000 High-Volume Desktop Pressure Sealer and Folder (Formely MX8000) (PMX13000)
- Adjustable Speed. Adjustable speed allows operator to work at a comfortable speed and quiet environment.
- Heavy Duty Cycle. Enhanced parts an life cycle on rollers allow MX13000 to operate up to 400,000 sheets per month.
- Reverse (RFR) Friction Roller. Unique RFR system, automatically detects, singulates, and corrects doubles without any operator intervention for increased productivity.
- Four-roller Sealing Unit. A second pair of sealing rollers enables enhanced sealing quality at higher speed.
- Large Infeed Capacity. The easy-to-load, auto-lift infeed hopper holds up to 1,400 sheets for time saving throughout processing.
Part #: PMX13000 -
Drytac 50.25" x 98.25" Hot Press Heated Glass Top Vacuum Press with Stand (HGP560)
- Glass top allows most applications to remain visible even when the press is closed.
- State-of-the-art heating system that ensures fast, even heating.
- Programmable vacuum cycle for consistent results.
- Adjustable pressure control.
- Dedicated vacuum pump.
Part #: HGP560 -
Morgana FSN Suction Feed Rotary Numbering Machine (65031)
- Precision-feeding and sheet control.
- Up to 8 parallel or convex heads.
- Full safety enclosures and interlocks.
- High power vacuum and air pump.
- Fast, simple make-ready.
Part #: 65031
