Product listing: White Pigment 24" x 1000' Laminating / Toner Fusing Foil (PG-WHT-36-1000) to Black 3/16" Gator Foam Mounting Boards 30" x 40" - 10pk (SGP-BG3040)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. White Pigment 24" x 1000' Laminating / Toner Fusing Foil (PG-WHT-36-1000)

    • Item: PG-WHT-36-1000
    • Color: White
    • Width: 24"
    • Roll Length: 1000'
    • Core Size: 1"
    Part #: PG-WHT-36-1000

    $484.71

  2. 24" x 1000' Pigment Laminating Foil (MYPIG-24X1000)

    • Color: Choose Above
    • Width: 24"
    • Roll Length: 1000'
    • Core Size: 1"
    • Color: Available in 2 different colors
    Part #: MYPIG-24X1000

    $484.71

  3. Challenge Handy Padder Portable Padding Press (CH-HANDYPADDER)

    • Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
    • Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
    • Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
    • Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
    • Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
    Part #: CH-HANDYPADDER

    $479.00

  4. White 1/2" Foam Core Permanent Adhesive 30" x 40" Mounting Boards - 25pk (AG-550433)

    • Board Type: Gator Board with permanent adhesive
    • Board Thickness: 1/2"
    • Board Size: 30" x 40"
    • Board Color: White
    • Quantity: 25 Per Box
    Part #: AG-550433

    $483.37

  5. 1.2mil PlatinumPET Gloss Low Melt Laminating Film - 38" x 3000' (3 Inch Core) (MYLFPGD3380003000)

    • Film Type: Premium Low Melt
    • Thickness: 1.2 Mil
    • Roll Width: 38"
    • Roll Length: 3000'
    • Film Finish: Gloss
    Part #: MYLFPGD3380003000

    $483.16

  6. 5mil PlatinumPET Gloss Low Melt Laminating Film - 36" x 1000' (3 Inch Core) (MYLFPGN3360001000)

    • Film Type: Premium Low Melt
    • Thickness: 5 Mil
    • Roll Width: 36"
    • Roll Length: 1000'
    • Film Finish: Gloss
    Part #: MYLFPGN3360001000

    $483.06

  7. SEAL 51" x 250' 10mil ThermaShield Gloss Heat-Activated Laminating Film (STS62417)

    • Economical, high-activation temperatures (185- 235°F) laminating film.
    • Designed to protect and enhance images in a variety of display applications.
    • Gloss finish and 10mil thick.
    • Ideal for use on any SEAL multi-temperature roller laminator.
    • Roll Width: 51"
    Part #: STS62417

    $482.96

  8. Samsill Sterling Zipper Pad Holder and Ring Binder - 10pk (SAM-15650)

    • Padded vinyl cover features look and feel of Napa leather with wraparound zipper
    • Features a writing pad
    • Includes 2 exterior storage pockets, zippered security compartment, pen loop and more
    • Offers sleek radius corners
    • Sheet size: 8.50" Width x 11" Length
    Part #: SAM-15650

    $481.85

  9. SpeedPress 4' x 8' Rhino Self-Healing Large Cutting Mat with Direct Print Grid (SP-CM152DP)

    • Perfect for your cutting tables.
    • It has a grid silk screen printed on surface for precise and accurate cutting.
    • It is thick, durable and long-lasting, manufactured of 180-gauge (3/16") polyethylene plastic.
    • The translucent, non-glare cutting mat looks and functions great.
    • Ideal for quilters, printers, signmakers, framers, photographers, designers, crafts, sewing, model making, chef cutting boards, and more.
    Part #: SP-CM152DP

    $156.41

  10. Black 36" x 48" Gloss Gator Pouch Boards - 5pk (MYB62323G)

    • Pouch Board for ProSeal, Spartan and other heated roll laminators
    • 3/16" thick Gator foam board with gloss laminate attached
    • Resists bowing and is stronger than regular Foam Board
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    Part #: MYB62323G

    $481.29

  11. Dahle Model Premium Rolling Trimmer - 51 1/8 Inch (448)

    • High capacity trimmer that cuts matboard!
    • Cuts up to 20 sheets of paper at a time
    • Self-sharpening blade cuts in either direction
    • 1/8" Thick blade is made of ground steel and encased in a plastic housing for safety
    • Automatic paper clamp holds work securely
    Part #: 448

    $479.24

  12. GBC Octiva LM Textured Satin 5mil (GBCOLMTS5)

    • Film Type: GBC Octiva Lo-Melt Textured Satin
    • Thickness: 5mil
    • Roll Width: 38" - 61"
    • Roll Length: 150' - 250'
    • Film Finish: Textured Satin
    Part #: GBCOLMTS5

    $479.98

  13. GBC Octiva LM Textured Satin 5mil 51" x 250' (9301585)

    • Film Type: GBC Octiva Lo-Melt Textured Satin
    • Thickness: 5mil
    • Roll Width: 51"
    • Roll Length: 250'
    • Film Finish: Textured Satin
    Part #: 9301585

    $479.98

  14. Fellowes AutoMax 200C Auto Feed Cross-Cut Paper Shredder (4653501)

    • Automatic shredding for personal use and enhanced productivity.
    • 200 sheet automatic and 10 sheet manual shredding capacity.
    • Maximum run time: 12 min on / 25 min off.
    • AccuFeed System provides fast automatic shredding for medium usage.
    • Auto Reverse stops and reverses paper if a jam occurs.
    Part #: 4653501

    $479.76

  15. Mactac Permacolor ColorTrans CT2200 Series Optically Clear Perm/Rem Mounting Films (MACTAC-CT22)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: MACTAC-CT22

    $479.51

  16. Mactac Permacolor ColorTrans Optically Clear 51" x 150' Perm/Rem Mounting Film (CT2251L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2251L150

    $479.51

  17. Fellowes Powershred 99Ms Micro-Cut Paper Shredder (4609001)

    • Sheet Capacity (20 lb. paper): 14
    • Cut Type: Micro-Cut
    • Cut Size: 5/64" x 9/16"
    • Security Level: P-5
    • Speed (FPM): 11
    Part #: 4609001

    $479.27

  18. Tamerica 210EPB Electric Plastic Comb Binding Machine (T210EPB)

    • Heavy duty metal construction.
    • Punches up to 10,000 sheets/hr up to 12" in length. And binds up to 250 books/hr up to 2" thick.
    • Push button punching operation
    • 7 Disengageable Dies
    • Hollow ground self-sharpening dies
    Part #: T210EPB

    $479.00

  19. Akiles CoilMac ER+ Plus Oval Hole Coil Binding Machine with Inserter (Coilmac-ER+)

    • Extended Single Punching Length (13") : With open ends & continuous punch guide to easily punch documents of any length (up to 26").
    • High Volume Punch Capacity : Suggested up to 20-sheet* for 20 lbs paper, or 2.6mm (28-sheet equivalent)** for hardboard, in 13" length (53 holes).
    • Super Strength Punch Mechanism with exclusive "Precision Guiding SystemTM" Blade Set : Cast-hardened & heat-treated steel dies provide superior strength & hardness. Exclusive "precision guiding system" guarantees a sharp & clean perforation everytime.
    • Top Electric Roller Coil Inserter (Foot Pedal Operated) : This easy to use and durable roller makes coil inserting surprisingly fast and easy. It is strategically placed on the left side of the machine so your coil will clear the punch handle while you are inserting.
    • Side Margin Control : Provides an evenly centered punch for all document sizes.
    Part #: Coilmac-ER+

    $478.99

  20. SealerSales 3-Layer Pink Anti-Static Cushion Pouches with Slider Zipper (SS3LAYPACPWSZ)

    • Advanced Slide-Rite closure system.
    • Easy to open and close.
    • More economical form of E.S.D. protection - eliminates the hazard of static damage to electronic components.
    • Polycarbonate compatible, humidity independent, non-octanoic and is both non-corrosive and non-contaminating.
    • Three layer Anti-Static Cushion Pouch: Pink Anti-Static poly, Pink Anti-Static bubble, and an inner layer of Pink Anti-Static poly; with double track red line Anti-Static zipper closure.
    Part #: SS3LAYPACPWSZ

    $478.48

  21. SealerSales 8.25" x 7.5" 3-Layer Pink Anti-Static Cushion Pouches with Slider Zipper - 250pk (SZB883-0807-250)

    • Advanced Slide-Rite closure system.
    • Easy to open and close.
    • More economical form of E.S.D. protection - eliminates the hazard of static damage to electronic components.
    • Polycarbonate compatible, humidity independent, non-octanoic and is both non-corrosive and non-contaminating.
    • Three layer Anti-Static Cushion Pouch: Pink Anti-Static poly, Pink Anti-Static bubble, and an inner layer of Pink Anti-Static poly; with double track red line Anti-Static zipper closure.
    Part #: SZB883-0807-250

    $478.48

  22. 5mil PlatinumPET Matte DigiBOND Ultra Grip Laminating Film - 18" x 1000' (MYLFHMN3180001000)

    • Film Type: Digital Ultra Grip Laminating Film
    • Thickness: 5 Mil
    • Roll Width: 18"
    • Roll Length: 1000'
    • Film Finish: Matte / Satin
    Part #: MYLFHMN3180001000

    $478.32

  23. Drytac Lintec Clear UV 2.0mil 61" x 150' Scratch Resistant Window Graphic Film with Permanent Adhesive (E-2100ZC-61)

    • Size: 61" x 150'
    • Thickness: 2.0mil
    • Film: Scratch Resistant Clear Polyester (Glass Film)
    • Adhesive: NPL Ultra Clear High Performance Permanent Acrylic
    • Part Number: E-2100ZC-61
    Part #: E-2100ZC-61

    $478.24

  24. HSM Signature Series DuraFlex Shred Console - Maple (HSM-36-DF-MA-23)

    • Anti-phishing paper deflector and self-closing lock ensure documents remain secure at all times.
    • Available in 3 attractive colors to complement your office decor.
    • Ergonomic Rigid Insert offers lightweight design and power grips on both ends to allow for easy emptying. Balanced grip allows for easier handling than traditional console bag.
    • Modular base protects carpets and console from damage, slides easily on car pet.
    • Only ergonomic design verified as preferred for usability by third party study from Humantech.
    Part #: HSM-36-DF-MA-23

    $476.29

  25. Polar 82EL High Speed Steel Replacement Blade (JH-44100HSS)

    • Compatible Models: Polar 82 EL
    • Material: High Speed Steel
    • Holes: 10
    • Length: 38.976"
    • With: 4.213"
    Part #: JH-44100HSS

    $476.99

  26. Speer-Lechner Model SL-IIIM Top Side (L-R) Replacement Blade (JH-37560HSS)

    • Type of Blade: High Speed Steel
    • Dimensions (L x W x T): 20.079" x 4.724" x .394"
    • Holes/Slots: 12H
    • Hole Size: M12
    • Type of Blade: High Speed Steel
    Part #: JH-37560HSS

    $476.99

  27. 11" x 8.5" Maroon Size D 1" VeloBind Hard Cover Cases - 40pk (VBHCMRD)

    • Product Type: Velobind Hard Cover Cases
    • Color: Maroon
    • Finish: Kidskin Leatherette
    • Spine Size: Size D
    • Sheet Size: 11" x 8.5"
    Part #: VBHCMRD

    $474.40

  28. Frog Furnishings Medium One-Sided Message Center w/ Two Posts - Green (JH-PBMC2PGRE)

    • Made from Jayhawk's premium grade recycled plastic
    • Virtually maintenance free
    • Paint will not bond to the surface
    • UV Protected against sun fading
    • Made in the USA
    Part #: JH-PBMC2PGRE

    $475.00

  29. Harris Macey Omni Double Cut C-635-0-1046 HCHC Replacement Blade (JH-42004HCHC)

    • Type of Blade: High Carbon High Chrome
    • Dimensions (L x W x T): 14.250" x 3.750" x .250"
    • Holes/Slots: 5S
    • Type of Blade: High Carbon High Chrome
    • Dimensions (L x W x T): 14.250" x 3.750" x .250"
    Part #: JH-42004HCHC

    $474.89

  30. Black 3/16" Gator Foam Mounting Boards 30" x 40" - 10pk (SGP-BG3040)

    • Board Type: Gator Foam Mounting Boards (Uncoated)
    • Board Thickness: 3/16"
    • Board Size: 30" x 40"
    • Board Color: Black
    • Quantity: 10 Per Box
    Part #: SGP-BG3040

    $472.76

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   40   50   60   70   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   110   120   130   140   150   160   170   180   200   300   400   500   600   700   800   900   994