Product listing: Challenge Handy Padder Portable Padding Press (CH-HANDYPADDER) to 11" x 8.5" Maroon Size D 1" VeloBind Hard Cover Cases - 40pk (VBHCMRD)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Challenge Handy Padder Portable Padding Press (CH-HANDYPADDER)

    • Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
    • Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
    • Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
    • Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
    • Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
    Part #: CH-HANDYPADDER

    $479.00

  2. Mactac Permacolor ColorTrans CT2200 Series Optically Clear Perm/Rem Mounting Films (MACTAC-CT22)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: MACTAC-CT22

    $479.00

  3. Mactac Permacolor ColorTrans Optically Clear 51" x 150' Perm/Rem Mounting Film (CT2251L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2251L150

    $479.00

  4. Tamerica 210EPB Electric Plastic Comb Binding Machine (T210EPB)

    • Heavy duty metal construction.
    • Punches up to 10,000 sheets/hr up to 12" in length. And binds up to 250 books/hr up to 2" thick.
    • Push button punching operation
    • 7 Disengageable Dies
    • Hollow ground self-sharpening dies
    Part #: T210EPB

    $479.00

  5. Akiles CoilMac ER+ Plus Oval Hole Coil Binding Machine with Inserter (Coilmac-ER+)

    • Extended Single Punching Length (13") : With open ends & continuous punch guide to easily punch documents of any length (up to 26").
    • High Volume Punch Capacity : Suggested up to 20-sheet* for 20 lbs paper, or 2.6mm (28-sheet equivalent)** for hardboard, in 13" length (53 holes).
    • Super Strength Punch Mechanism with exclusive "Precision Guiding SystemTM" Blade Set : Cast-hardened & heat-treated steel dies provide superior strength & hardness. Exclusive "precision guiding system" guarantees a sharp & clean perforation everytime.
    • Top Electric Roller Coil Inserter (Foot Pedal Operated) : This easy to use and durable roller makes coil inserting surprisingly fast and easy. It is strategically placed on the left side of the machine so your coil will clear the punch handle while you are inserting.
    • Side Margin Control : Provides an evenly centered punch for all document sizes.
    Part #: Coilmac-ER+

    $478.99

  6. 5mil PlatinumPET Matte DigiBOND Ultra Grip Laminating Film - 18" x 1000' (MYLFHMN3180001000)

    • Film Type: Digital Ultra Grip Laminating Film
    • Thickness: 5 Mil
    • Roll Width: 18"
    • Roll Length: 1000'
    • Film Finish: Matte / Satin
    Part #: MYLFHMN3180001000

    $478.32

  7. Quartet 4' x 12' Black Porcelain Classroom Chalkboard (QRT-PCA412B)

    • Porcelain, magnetic chalkboard surface will not stain, ghost, scratch or dent
    • Designed for heavy use in a busy, educational setting
    • Black surface chalkboard is 4' x 12' in size
    • Anodized, satin-finish aluminum fits in with any classroom design
    • Cradle to CradleCM Silver certified porcelain, certified for material content, recyclability and sustainable manufacturing processes
    Part #: QRT-PCA412B

    $477.99

  8. Drytac Reveal 7.0mil 60" x 164' Backlit Film (PUVB60164-7)

    • High quality matte white PET.
    • Printable on front side.
    • Excellent print quality.
    • Anti-static, anti-slip treatment on the back side keeps message securely in place.
    • White point allows for use with table cutters.
    Part #: PUVB60164-7

    $477.69

  9. GBC / Swingline P210E Electric Proclick Binding Machine (7708180)

    • Punch Method: Electric
    • Punching Capacity: 15 Sheets (20lb Bond) Per Punch.
    • Max Document Thickness: 110 Sheets (5/8" Thick)
    • Document Size: 11"
    • Binding Spine Size Guide: Yes
    Part #: 7708180

    $477.32

  10. Keencut 60" Table Edge Rotary Cutter (TE) (60631)

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60631

    $477.00

  11. Polar 82EL High Speed Steel Replacement Blade (JH-44100HSS)

    • Compatible Models: Polar 82 EL
    • Material: High Speed Steel
    • Holes: 10
    • Length: 38.976"
    • With: 4.213"
    Part #: JH-44100HSS

    $476.99

  12. Speer-Lechner Model SL-IIIM Top Side (L-R) Replacement Blade (JH-37560HSS)

    • Type of Blade: High Speed Steel
    • Dimensions (L x W x T): 20.079" x 4.724" x .394"
    • Holes/Slots: 12H
    • Hole Size: M12
    • Type of Blade: High Speed Steel
    Part #: JH-37560HSS

    $476.99

  13. SALCO Electric Stapler (R106)

    • Easy interchangeable parts.
    • Binds from 2 to 40 sheets at a time
    • Can do both flat and saddle stapling.
    • allows 2 or more staplers to be linked together for simultaneous stapling operations.
    • Supplied with both automatic and foot control as standard and stapling depth up to 100mm.
    Part #: R106

    $476.88

  14. HSM Securio B22c Level P-4 Cross Cut Office Shredder (HSM-1833)

    • Made in Germany: All HSM Classic & Securio Models are Made in Germany. Precision Engineering. TAA Compliant.
    • Solid Steel Cutting Cylinders: Cutting Heads are Manufactured from 100% Steel. Maintains High Cutting Capabilities While Using Less Energy. V-groove Technology Ensures Precise Cutting.
    • Cutting Cylinder Lifetime Warranty: Lifetime Warranty on Solid Steel Cutting Cylinders. Patented "V-Tek" Cutting Groove Technology. Higher Cutting Capacity. Lower Power Requirements.
    • Continuous Duty Motor: Allows for Continual Shredding with no Down Time. Longer Run Time Resulting in Reduced Labor Cost. Increasing Productivity.
    • Zero Energy Stand-By: Consumes no Power While the Machine is in Stand-by Mode.
    Part #: HSM-1833

    $476.67

  15. SealerSales 3-Layer Metallized Shielding Cushion Pouches with Slider Zipper (SS3LAYMSCPWSZ)

    • Advanced Slide-Rite closure system.
    • Easy to open and close.
    • Multi-layered static shielding cushion pouch provides faraday protection while E.S.D. Safecell cushioning to absorb shock and vibration.
    • Lead time: 7-10 days.
    • Sizes: 8.25" x 7.5" - 14.25" x 12"
    Part #: SS3LAYMSCPWSZ

    $476.11

  16. SealerSales 8.25" x 7.5" 3-Layer Metallized Shielding Cushion Pouches with Slider Zipper - 250pk (SZB773-0807-250)

    • Advanced Slide-Rite closure system.
    • Easy to open and close.
    • Multi-layered static shielding cushion pouch provides faraday protection while E.S.D. Safecell cushioning to absorb shock and vibration.
    • Lead time: 7-10 days.
    • Size: 8.25" x 7.5"
    Part #: SZB773-0807-250

    $476.11

  17. Logan Total Trimmer 60" Material Cutter from Graphics (T360)

    • 60" (152cm) capacity
    • Professional straight cutter for signs, graphics, art & framing.
    • Cuts up to 1/2 inch (13 mm) thickness (PVC foamboard, foamboard, honeycomb & corrugated plastic, vinyl & plastic film, mat board, illustration board, papers, fabric).
    • Adjustable knob depth settings of 1/8 inch (3 mm), 1/4 inch, (6 mm), 1/2 inch (13 mm).
    • Includes 5 #267 blades.
    Part #: T360

    $476.07

  18. HSM Securio B24s Strip-cut 28-30 Sheet Shredder - HSM1781 (HSM-1781)

    • Made in Germany: All HSM Classic & Securio Models are Made in Germany. Precision Engineering. TAA Compliant.
    • Solid Steel Cutting Cylinders: Cutting Heads are Manufactured from 100% Steel. Maintains High Cutting Capabilities While Using Less Energy. V-groove Technology Ensures Precise Cutting.
    • Cutting Cylinder Lifetime Warranty: Lifetime Warranty on Solid Steel Cutting Cylinders. Patented "V-Tek" Cutting Groove Technology. Higher Cutting Capacity. Lower Power Requirements.
    • Anti-Jam Technology with Reverse Function: Prevents Jams When Machine is Overloaded. Increasing Productivity. Saves Unanticipated Repair Costs.
    • Continuous Duty Motor: Allows for Continual Shredding with no Down Time. Longer Run Time Resulting in Reduced Labor Cost. Increasing Productivity.
    Part #: HSM-1781

    $475.23

  19. SealerSales 40" Long Hand Impulse Sealer w/ Sliding Cutter (WN-1000HC)

    • Longer seal lengths for specialized sealing needs.
    • No-warm up time.
    • Heavy duty construction.
    • Available with cutter unit.
    • Manufacturer's replacement kit includes 2 elements and 1 blade if cutter unit is ordered.
    Part #: WN-1000HC

    $474.99

  20. SealerSales 30" Bar Sealer Shrink Wrapping Starter Kit (SWK-30-S3)

    • Standard sets comes complete with a bar sealer with film roller (W-Series), heat gun (HG-1), and shrink film (500 ft. roll, 75 gauge). Powerstrip not included. Package ships as two pacakges.
    • There are three steps involved in shrink packaging:
    • Insert the item between the fold of film or into a shrink bag or tubing.
    • Use a sealer to cut off the excess film and seal by lowering the sealing bar of the sealer.
    • Shrink the film on all sides with heat gun or shrink tunnel.
    Part #: SWK-30-S3

    $474.95

  21. Harris Macey Omni Double Cut C-635-0-1046 HCHC Replacement Blade (JH-42004HCHC)

    • Type of Blade: High Carbon High Chrome
    • Dimensions (L x W x T): 14.250" x 3.750" x .250"
    • Holes/Slots: 5S
    • Type of Blade: High Carbon High Chrome
    • Dimensions (L x W x T): 14.250" x 3.750" x .250"
    Part #: JH-42004HCHC

    $474.89

  22. 1-7/8" Black 4:1 Metal Spiral Coil Binding Spines - 100pk (MYMSC178BK)

    • Color: Black
    • Material: Nylon Coated Steel
    • Diameter Size: 1-7/8"
    • Pitch: 4:1
    • Capacity: 390 Sheets (20# Bond)
    Part #: MYMSC178BK

    $474.59

  23. 1-7/8" White 4:1 Metal Spiral Coil Binding Spines - 100pk (MYMSC178WH)

    • Color: White
    • Material: Nylon Coated Steel
    • Diameter Size: 1-7/8"
    • Pitch: 4:1
    • Capacity: 390 Sheets (20# Bond)
    Part #: MYMSC178WH

    $474.59

  24. 11" x 8.5" Black Size A 1/4" VeloBind Hard Cover Cases - 40pk (VBHCBKA)

    • Product Type: Velobind Hard Cover Cases
    • Color: Black
    • Finish: Kidskin Leatherette
    • Spine Size: Size A
    • Sheet Size: 11" x 8.5"
    Part #: VBHCBKA

    $474.40

  25. 11" x 8.5" Black Size B 1/2" VeloBind Hard Cover Cases - 40pk (VBHCBKB)

    • Product Type: Velobind Hard Cover Cases
    • Color: Black
    • Finish: Kidskin Leatherette
    • Spine Size: Size B
    • Sheet Size: 11" x 8.5"
    Part #: VBHCBKB

    $474.40

  26. 11" x 8.5" Black Size C 3/4" VeloBind Hard Cover Cases - 40pk (VBHCBKC)

    • Product Type: Velobind Hard Cover Cases
    • Color: Black
    • Finish: Kidskin Leatherette
    • Spine Size: Size C
    • Sheet Size: 11" x 8.5"
    Part #: VBHCBKC

    $474.40

  27. 11" x 8.5" Black Size D 1" VeloBind Hard Cover Cases - 40pk (VBHCBKD)

    • Product Type: Velobind Hard Cover Cases
    • Color: Black
    • Finish: Kidskin Leatherette
    • Spine Size: Size D
    • Sheet Size: 11" x 8.5"
    Part #: VBHCBKD

    $474.40

  28. 11" x 8.5" Black Velobind Hard Cover Cases - 40pk (MYVBHCBK)

    • Product Type: Velobind Hard Cover Cases
    • Color: Black
    • Finish: Kidskin Leatherette
    • Spine Size: A - E
    • Sheet Size: 11" x 8.5"
    Part #: MYVBHCBK

    $474.40

  29. 11" x 8.5" Maroon Size C 3/4" VeloBind Hard Cover Cases - 40pk (VBHCMRC)

    • Product Type: Velobind Hard Cover Cases
    • Color: Maroon
    • Finish: Kidskin Leatherette
    • Spine Size: Size C
    • Sheet Size: 11" x 8.5"
    Part #: VBHCMRC

    $474.40

  30. 11" x 8.5" Maroon Size D 1" VeloBind Hard Cover Cases - 40pk (VBHCMRD)

    • Product Type: Velobind Hard Cover Cases
    • Color: Maroon
    • Finish: Kidskin Leatherette
    • Spine Size: Size D
    • Sheet Size: 11" x 8.5"
    Part #: VBHCMRD

    $474.40

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   40   50   60   70   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106   107   110   120   130   140   150   160   170   180   190   200   300   400   500   600   700   800   900   1,000   1,096