Product listing: Drytac MHL Lustre UV 3mil 43" x 500' Low Temp Laminating Film - Low Melt (MLD43503) to Dahle Model 556 Professional 37 1/2 Inch Rolling Trimmer - Rotary Trimmers (DAH556)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Drytac MHL Lustre UV 3mil 43" x 500' Low Temp Laminating Film - Low Melt (MLD43503), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MLD43503

    $295.69

  2. Drytac MHL Lustre UV 3mil 38" x 500' Low Temp Laminating Film - Low Melt (MLD38503), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MLD38503

    $295.69

  3. Drytac MHL Gloss 10mil 51" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD51210), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD51210

    $714.27

  4. Drytac MHL Gloss 10mil 43" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD43210), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD43210

    $602.25

  5. Drytac MHL Gloss 10mil 38" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD38210), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD38210

    $532.21

  6. Drytac MHL Gloss 10mil 25" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD25210), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD25210

    $350.15

  7. Drytac MHL Gloss 5mil 55" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD55205), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD55205

    $329.49

  8. Drytac MHL Gloss 5mil 51" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD51205), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD51205

    $146.83

  9. Drytac MHL Gloss 5mil 43" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD43205), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD43205

    $252.55

  10. Drytac MHL Gloss 5mil 38" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD38205), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD38205

    $223.17

  11. Drytac MHL Gloss 5mil 25" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD25205), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD25205

    $146.83

  12. Drytac MHL Gloss 3mil 51" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD51503), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD51503

    $308.07

  13. Drytac MHL Gloss 3mil 43" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD43503), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD43503

    $259.71

  14. Drytac MHL Gloss 3mil 38" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD38503), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD38503

    $151.02

  15. Drytac MHL Gloss 3mil 25" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD25503), Laminating Film

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD25503

    $151.02

  16. Renz TC20 Manual Thumb Cut Calendar Punch - Wire Binding (RTC20), Binding Machines


      Manually punch 20 mm calendar thumb cuts.Allows a calendar hanger to now be used in the binding
      Quick adjustment up to A3 on the short edge
      Horizontal paper feeding
      Compact simple design
      Mechanical cycles per hour: 800
      Max. punching thickness: 2 mm
      Max. unpunched length: 800 mm
      Max. punching width: 300 mm ßÃЊ“Á
    Part #: RTC20

    $161.19

  17. C-Line 15" x 18" Stitched Shop Ticket Holders 25pk - Cubical Solutions (CLI-46158), Boards

      Taped and stitched edges provide added strength Heavyweight, clear rigid vinyl for maximum durability Convenient metal eyelet at top for hanging Makes a reusable Dry Erase Pocket Document insert sizes are shown Both sides are clear and visible Holders open on short side, displaying the document vertically
    Part #: CLI-46158

    $68.99

  18. C-Line 9" x 12" Neon Red Reusable Dry Erase Pockets 30pk - Cubical Solutions (CLI-40814), Boards

      Reusable super heavyweight pockets with a long lasting life Convenient eyelet for hanging Simple wipe with a soft dry cloth or tissue when used with a low-odor dry erase marker Neon red display
    Part #: CLI-40814

    $63.69

  19. GBC TL2900 Replacement Hook Kit - Wire Binding (7301255), Binding Machines


      Includes 1 set of hooks for the GBC TL2900 Electric Wire Closer
      Simple to replace with a phillips head screwdriver
      Hardware not included (screws from machine must be reused)
      GBC Part Number: 7301255 , 7301255 , 7301255G
      Includes 1 set of hooks
      Compatible with the GBC TL2900
      Easily to replace
      High quality material ßÃЊ“Á
    Part #: 7301255

    $95.00

  20. Wilson Jones 1-1/2" Clear Translucent Poly Binders 10pk - Non View Binders (A7040775), Ring Binders


      330 sheet capacity in 1.5 inch binder size
      Eco-friendly, PVC Free polypropylene material resists ink smudgin
      Two clear interior pockets
      Matte finish
      Ring Size: 1-1/2 Inch
      Ring Type: Round Ring
      Binder Style: Non-View Binders
      Sheet Capacity: 280 Sheets ßÃЊ“Á
    Part #: A7040775

    $54.29

  21. Wilson Jones 1" Purple Translucent Poly Binders 10pk - Non View Binders (A7040756A), Ring Binders


      175 sheet capacity in 1 inch binder size
      Eco-friendly, PVC Free polypropylene material resists ink smudging
      Two clear interior pockets
      Matte finish
      Ring Size: 1 Inch
      Ring Type: Round Ring
      Binder Style: Non-View Binders
      Sheet Capacity: 175 Sheets ßÃЊ“Á
    Part #: A7040756A

    $54.29

  22. Wilson Jones 1" Clear Translucent Poly Binders 10pk - Non View Binders (A7040755), Ring Binders


      175 sheet capacity in 1 inch binder size
      Eco-friendly, PVC Free polypropylene material resists ink smudgin
      Two clear interior pockets
      Matte finish
      Ring Size: 1 Inch
      Ring Type: Round Ring
      Binder Style: Non-View Binders
      Sheet Capacity: 175 Sheets ßÃЊ“Á
    Part #: A7040755

    $54.29

  23. Dahle Vantage Personal 18 Inch Guillotine Paper Cutter (18E), Paper-Handling

      Cuts up to 15sheets of paper at a time Spring action metal blade will not fall down Automatic paper clamp holds work securely Sturdy metal base with non-skid runner feet Pre-printed grid for easy sizing of paper Blade will secure in the down position Cutting Length: 18inch Cutting Capacity: 15sheets Dimensions: 19inchx15 1/2inch Part Number: 18E Warranty: 1Year Manufacturer Warranty UPC Code: 76769185005
    Part #: 18E

    $107.25

  24. Dahle Vantage Personal 15 Inch Guillotine Paper Cutter (15E), Paper-Handling

      Cuts up to 15sheets of paper at a time Spring action metal blade will not fall down Automatic paper clamp holds work securely Sturdy metal base with non-skid runner feet Pre-printed grid for easy sizing of paper Blade will secure in the down position Cutting Length: 15inch Cutting Capacity: 15sheets Dimensions: 15 3/4inchx12 1/4inch Part Number: 15E Warranty: 1Year Manufacturer Warranty UPC Code: 76769150003
    Part #: 15E

    $51.76

  25. Dahle Model Premium Rolling Trimmer - 51 1/8 Inch - Rotary Trimmers (448), Paper-Handling

      High capacity trimmer that cuts matboard! Cuts up to 20sheets of paper at a time Self-sharpening blade cuts in either direction 1/8inch Thick blade is made of ground steel and encased in a plastic housing for safety Automatic paper clamp holds work securely Inch and metric measurements with metric sizing grid for precise cuts Sturdy metal base will not warp or crack Thick walled aluminum guide rod Adjustable backstop fits on either side Can be wall mounted Optional floor stands available (446 & 448 only) Cutting Length: 51 1/8inch Cutting Capacity: 20sheets Dimensions: 59inchx15inch Part Number: 448 Warranty: Lifetime Limited Manufacturer Warranty UPC Code: 76769448001
    Part #: 448

    $437.00

  26. Dahle Model Premium Rolling Trimmer - 36 1/4 Inch - Rotary Trimmers (446), Paper-Handling

      High capacity trimmer that cuts matboard! Cuts up to 22sheets of paper at a time Self-sharpening blade cuts in either direction 1/8inch Thick blade is made of ground steel and encased in a plastic housing for safety Automatic paper clamp holds work securely Inch and metric measurements with metric sizing grid for precise cuts Sturdy metal base will not warp or crack Thick walled aluminum guide rod Adjustable backstop fits on either side Can be wall mounted Optional floor stands available (446 & 448 only) Cutting Length: 36 1/4inch Cutting Capacity: 22sheets Dimensions: 44 1/8inchx15inch Part Number: 446 Warranty: Lifetime Limited Manufacturer Warranty UPC Code: 76769446007
    Part #: 446

    $383.99

  27. Dahle Model Premium Rolling Trimmer - 26 3/8 Inch - Rotary Trimmers (444), Paper-Handling

      High capacity trimmer that cuts matboard! Cuts up to 25sheets of paper at a time Self-sharpening blade cuts in either direction 1/8inch Thick blade is made of ground steel and encased in a plastic housing for safety Automatic paper clamp holds work securely Inch and metric measurements with metric sizing grid for precise cuts Sturdy metal base will not warp or crack Thick walled aluminum guide rod Adjustable backstop fits on either side Can be wall mounted Optional floor stands available (446 & 448 only) Cutting Length: 26 3/8inch Cutting Capacity: 25sheets Dimensions: 34 1/4inchx15inch Part Number: 444 Warranty: Lifetime Limited Manufacturer Warranty UPC Code: 76769444003
    Part #: 444

    $299.00

  28. Dahle Model Premium Rolling Trimmer - 20 1/8 Inch - Rotary Trimmers (442), Paper-Handling

      High capacity trimmer that cuts matboard! Cuts up to 30sheets of paper at a time Self-sharpening blade cuts in either direction 1/8inch Thick blade is made of ground steel and encased in a plastic housing for safety Automatic paper clamp holds work securely Inch and metric measurements with metric sizing grid for precise cuts Sturdy metal base will not warp or crack Thick walled aluminum guide rod Adjustable backstop fits on either side Can be wall mounted Optional floor stands available (446 & 448 only) Cutting Length: 20 1/8inch Cutting Capacity: 30sheets Dimensions: 28inchx15inch Part Number: 442 Warranty: Lifetime Limited Manufacturer Warranty UPC Code: 76769442009
    Part #: 442

    $238.99

  29. Dahle Model Premium Rolling Trimmer - 14 1/8 Inch - Rotary Trimmers (440), Paper-Handling

      High capacity trimmer that cuts matboard! Cuts up to 30sheets of paper at a time Self-sharpening blade cuts in either direction 1/8inch Thick blade is made of ground steel and encased in a plastic housing for safety Automatic paper clamp holds work securely Inch and metric measurements with metric sizing grid for precise cuts Sturdy metal base will not warp or crack Thick walled aluminum guide rod Adjustable backstop fits on either side Can be wall mounted Optional floor stands available (446 & 448 only) Cutting Length: 14 1/8inch Cutting Capacity: 30sheets Dimensions: 22inchx15inch Part Number: 440 Warranty: Lifetime Limited Manufacturer Warranty UPC Code: 76769440005
    Part #: 440

    $181.95

  30. Dahle Model 556 Professional 37 1/2 Inch Rolling Trimmer - Rotary Trimmers (DAH556), Paper-Handling

      Blade is made of ground steel and encased in a plastic housing for safety Self-sharpening blade cuts in either direction Automatic paper clamp holds work securely Inch and metric measurements with metric sizing grid for precise cuts Sturdy metal base will not warp or crack Adjustable backstop Can be wall mounted Optional paper roll holder available Shown on optional floor stand Cutting Length: 37 1/2inch Cutting Capacity: 14sheets Dimensions: 45 1/2inchx14inch Part Number: 556 Warranty: Lifetime Limited Manufacturer Warranty UPC Code: 76769556003
    Part #: DAH556

    $288.42

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   40   50   60   70   80   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   130   140   150   160   170   180   190   200   300   304