Product listing: Keencut Evolution3 104" FreeHand Cutter Bar (61278) to Wilson Jones View-Tab 5-Tab Square Capture Dividers (W55631-FBA)
-
Keencut Evolution3 104" FreeHand Cutter Bar (61278), Brands
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Anti-sag system holds the cutter bar level for accurate line-up.
- Minimal setup: calibrated 'out of the box' accuracy.
Part #: 61278 -
Flipside 72" x 27" Black Magnetic Whiteboard Rolling Easel (FS-19112), Brands
- Features a premium quality, easy-to-clean, non-ghosting magnetic covered steel surface
- 72" x 27" Board Size
- Locking wheels make easel simple to move
- Ideal for home, school, or office use.
- Some assembly required.
Part #: FS-19112 -
Flipside 72" x 27" Silver Gridline Magnetic Whiteboard Rolling Easel (FS-19111), Brands
- Features a premium quality, easy to clean, non-ghosting magnetic covered steel surface
- 72" x 27" Board Size
- Gridline surface visible up close for lined writing, graphics, and 3D drawings, non-visible from far away.
- Locking wheels make the easel simple to move
- Some assembly required.
Part #: FS-19111 -
Flipside 71" x 27" Black Adjustable Tripod Dry-Erase Easel (FS-19110), Brands
- Premium melamine, easy to clean, non-ghosting surface
- Black Frame
- Lightweight and easy to transport
- Can be adjusted to standing or table height.
- ideal for home, school, or office
Part #: FS-19110 -
Akiles WireMac E 2:1 Electric Wire Binding Machine - Open Box (MYR-18-063-8), Clearance Equipment
- Die Disengagement Pins: For a clean and complete punching with different paper sizes.
- Side Margin Control: Provides and evenly centered punch for all document sizes.
- Wire Holder: Holds wire in place for easier inserting of sheets.
- Foot Pedal Operated
- Diameter Scale: Measures document's thickness in order to select best wire size option.
Part #: MYR-18-063-8 -
Rapid 100E Commercial Electric Stapler (RPD02044), Discontinued Products
- Commercial, high-speed electric stapler is built for heavy workloads
- High-strength, metal driver and springs deliver extra power and longer life
- Features adjustable paper stop, adjustable staple force system, and safety shut-off visor
- Throat depth ranges from 1/2" to 3-3/8"; frontloads full-strip, standard staples
- Fastens up to 50 sheets
Part #: RPD02044 -
Fletcher-Terry Titan 40" Board Cutter - Open Box (MYR-19-105-8), Boards
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
- Trimming feature for flexible vinyls, photo paper, and canvas.
- No need for two cutters dedicated to each function; saves on space and equipment investment.
- Engineered "green" strip gives you a visible cut line; no need for guesswork.
Part #: MYR-19-105-8 -
Quartet Ventura Gray Ultra Portable Overhead Projector - V4000M - Open Box (MYR-3489), Boards
- Sleek, full-featured portable projector folds flat into its hard-shell case for safe and easy transport
- Open head with 2,000 lumen light output ideal for small rooms with up to 20 people
- Three-element vari-focal lens ensures sharp focus and picture clarity
- Large 11.25" x 11.25" stage glass with reflective anti-glare projection
- Weighs just 8 lbs.
Part #: MYR-3489 -
GBC ColorCoil 4:1 .2475 Oversize Oval Die Set for USP13 - 314330300 - Open Box (MYR-3371), Clearance Equipment
- Type: GBC / Sickinger USP13 Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC ColorCoil
- Pitch: 4:1 Pitch (0.2475)
- Hole Shape: Oversize Oval
Part #: MYR-3371 -
Rhin-O-Tuff 3:1 Square Die Set W/ Thumbcut For HD6500 and HD7000 - Open Box (MYR-16-131-4), Rhin-O-Tuff
- 3:1 Pitch Square Hole Die With Thumbcut
- .333 Hole Spacing
- .156 Square Hole Size
- Rhin-O-Tuff Part Number: 000907T
- 3:1 Pitch Square Hole Die With Thumbcut
Part #: MYR-16-131-4 -
Keencut 44" Simplex Sheet Material Cutter - 60455 - Open Box (MYR-19-161-8), Cutters
- Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
- Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
- The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
- Quick fit thread cap for easy accessory attachment.
- Blade locking thumb screw adds safety and convenience.
Part #: MYR-19-161-8 -
Demo Pitney Bowes Relay 1000 Two Station Inserter (R4PIR10002S), Mail Room Equipment
- The Relay 1000 inserting system will:
- Add Productivity: Automating mail folding and inserting saves time.
- Ensure Accuracy: Eliminate costly delays in mailing due to manual errors.
- Easy to use out of the box operation: Plug it in, load your materials and you’re ready to produce.
- Provides flexible processing: Invoices, statements, letters, promotions and other correspondence are folded, inserted and securely sealed in envelopes, ready for mailing.
Part #: R4PIR10002S -
Demo Pitney Bowes Relay 3000 Three Station Inserter (R4PIR30003S), Mail Room Equipment
- Versatile: The Relay 3000 inserting system gives you the flexibility to handle multiple fold types, page sizes, and outer envelope sizes.
- Efficient: Load-on-the-fly sheet feeders and high capacity envelope feeder.
- Stop manual folding: Manual feed on daily mail mode processes up to five pages stapled or unstapled.
- Save time: Up to 20 common applications can be programmed.
- Prevent costly errors: The built-in double-detection on all feeders auto stop clear deck and auto page separation.
Part #: R4PIR30003S -
Keencut Evolution3 44" SmartFold Cutter (61384), Brands
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Swing-down under-bench storage to leave work surface clear.
Part #: 61384 -
Keencut 44" Evolution 2 Bench (60949), Cutter Accessories
- Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
- Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
- Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
- Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
- When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
Part #: 60949 -
Keencut 44" Evolution-E2 Precision Cutter (60384), Substrate Cutters
- Single handed positions, cutting, and clamping.
- Straight and accurate cuts to within 0.008" by adjustable levelers.
- Integral extruded alloy cutting base.
- 5 year general warranty on all parts (except blades).
- 20 year warranty on cutting bearings.
Part #: 60384 -
Keencut Javelin Integra 44" Wide-Format Cutter Bar (60285), Substrate Cutters
- Standard twist lifts provide a simple and convenient lift and hold solution.
- Unique Extrusion design for unparalleled cutting accuracy.
- Quick fit thread cap for easy accessory attachment.
- Blade locking thumb screw for safety and convenience.
- Rotating knob for ultra-fine blade depth adjustment.
Part #: 60285 -
Rotatrim 118" PowerTech Electric Rotary Cutter (60460), Rotary Trimmers
- Chromed 1-1/2" square steel guide rail and all metal construction eliminates distortion.
- Self-sharpening Sheffield tungsten steel cutting wheel and counterblade.
- Two way cutting option by removing cover plate.
- Transparent clamp strip and rubber gripper for firm positive clamping action.
- A 10-1/2" rule and squaring arm is factory installed onto an all-metal base.
Part #: 60460 -
Rotatrim 13.75" MonoRail Rotary Cutter (60209), Brands
- Sturdy 1" square chromed guide rail.
- Self-sharpening tungsten steel cutting wheel cuts both directions.
- Shatterproof housing and end frames.
- 1 Year limited manufacturer warranty.
- Solid and reliable baseboard construction.
Part #: 60209 -
Rotatrim 84.5" DigiTech Rotary Cutter (60351), Brands
- Sheffield Steel self-sharpening rotary & flat blades.
- 11/2" Brushed stainless steel guide rail.
- Cast metal cutting head and end frames.
- Extruded aluminum/plastic clamp-strip.
- Precision rule for accurate cutting.
Part #: 60351 -
Keencut Evolution3 84" FreeHand Cutter Bar (61277), Brands
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Anti-sag system holds the cutter bar level for accurate line-up.
- Minimal setup: calibrated 'out of the box' accuracy.
Part #: 61277 -
Keencut Evolution3 64" FreeHand Cutter Bar (61276), Brands
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Anti-sag system holds the cutter bar level for accurate line-up.
- Minimal setup: calibrated 'out of the box' accuracy.
Part #: 61276 -
Keencut Evolution3 44" FreeHand Cutter Bar (61275), Brands
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Anti-sag system holds the cutter bar level for accurate line-up.
- Minimal setup: calibrated 'out of the box' accuracy.
Part #: 61275 -
GBC pre-punched-id-badge-lamination-pouches-50-pack-3747552 (3747552-FBA), Clearance Products
- 5 mil, medium weight pouch.
- Pre-Punched for easy connection to lanyards and badge clips.
- Recommended for security Id badges, photo Ids and more.
- Crystal clear and horizontally oriented.
- Manufacturer: GBC (General Binding Corporation)
Part #: 3747552-FBA -
Legal Size Laminating Pouch Carrier 9" x 14.5" (AKLPCLEGAL-FBA), Laminating Pouches
- Compatible with all major brands of laminators on the market
- Coated stock helps ensure that laminating pouches do not stick inside the carriers.
- Pouch Carriers can easily be cut down for smaller pouches or custom sized pouches
- For LegalSize Laminating Pouches (9" x 14.5")
- Part Number: AKLPCLEGAL
Part #: AKLPCLEGAL-FBA -
GBC SelfSeal Repositionable 3-ring Prepunched Pouches - 5pk (3747194-FBA), Pouches
- Size: Letter Size Peel-n-Stick
- Dimensions: 11-9/16" x 9-1/4"
- Thickness (Gauge): 8mil
- Quantity: 5 Per Pack
- Prepunched for 3-ring.
Part #: 3747194-FBA -
Wilson Jones 5.5" x 8.5" 7-Hole Punched Assorted Mini Poly Slash Jackets 5pk (W21517-FBA), Clearance Products
- Slash jackets securely hold and organize loose papers; Slashed front allows partial viewing of top sheet so you can quickly and easily identify the jacket's contents.
- Durable poly material is PVC Free, water-resistant and nearly impossible to tear.
- Each jacket is pre-punched with 7 holes for easy insertion into a ring binder or planner.
- Holds 5.5 x 8.5 inch sheets and perfect for use with a mini binder.
- 5 pack includes assorted colors: blue, green, orange, purple and yellow.
Part #: W21517-FBA -
Quartet Black Magnetic Mini Document Holder/Mail Organizer (3.25" x 3.5") 1pk (QRT-34812BK-FBA), Clearance Products
- Mini mail organizer keeps all mail neatly in one location.
- Magnetic backing allows you to attach organizer to magnetic whiteboard or any other metal surface.
- 3.25" x 3.5" x 0.714".
- Color: Black
- Mini mail organizer keeps all mail neatly in one location.
Part #: QRT-34812BK-FBA -
GBC Auto-Expiring Visitor ID Badge BadgeMates 50pk (3747485-FBA), Brands
- One-Step Activation process
- Expires one day after activation
- Self-adhesive backs for easy display
- Color: White / Red
- Quantity: 50 Badges
Part #: 3747485-FBA -
Wilson Jones View-Tab 5-Tab Square Capture Dividers (W55631-FBA), Clearance Products
- 5-tab set
- Tabs are transparent, clear and square in shape
- Polypropylene tab divider material is durable enough for frequent reuse
- Create custom tabs and print all tab titles on one sheet with one-step formatting at wilsonjones.com/templates
- Material: Polypropylene
Part #: W55631-FBA
