Product listing: Ledco Digital 60" Laminator & Mounter (60B-0007) to Custom Length Binding Combs 100pk (CLCOMBS)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Ledco Digital 60" Laminator & Mounter (60B-0007), Ledco

    • A Quality silicone rubber laminating rollers release materials easily and maintain their flexibility for a good edge seal.
    • Two sets of rollers keep the film flat and tight while heat laminating so that the automatic fans cool and set the adhesive. When thermal films cool in a slack state, the surface of the lamination is wavy and rippled.
    • Supply roll tension is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels.
    • Variable speed allows thinner films to be run faster, and enables mounting or the use of thicker films, which require slower speeds.
    • Independent temperature controls for top and bottom heaters allow the use of different materials on front and back of an image.
    Part #: 60B-0007

    $18398.99

  2. Ledco Digital 42" Laminator & Mounter (42B-0008), Ledco

    • A Quality silicone rubber laminating rollers release materials easily and maintain their flexibility for a good edge seal.
    • Two sets of rollers keep the film flat and tight while heat laminating so that the automatic fans cool and set the adhesive. When thermal films cool in a slack state, the surface of the lamination is wavy and rippled.
    • Supply roll tension is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels.
    • Variable speed allows thinner films to be run faster, and enables mounting or the use of thicker films, which require slower speeds.
    • Independent temperature controls for top and bottom heaters allow the use of different materials on front and back of an image.
    Part #: 42B-0008

    $15998.99

  3. Ledco Heavy Duty 38" Laminator with Stand (7038200A), Ledco

    • Intelligent heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
    • Laminating and pull rollers are covered with quality silicone rubber for superior release quality, higher lamination quality and easier cleaning. The laminating rollers and pull rollers are interchangeable to help keep maintenance costs down.
    • Pneumatic power opens or closes the laminating and pull rollers and gives you a precise and independent control of roll pressure. A compressor is built in so that shop air is not required.
    • Removable heat shoes are Teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
    • Built-in retractable slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
    Part #: 7038200A

    $30887.00

  4. Ledco 30" Automatic Laminate Cutter 110V (C300110-B), Ledco

    • Variable speed up to 150 feet per minute.
    • Adjustable speed even during operation.
    • Feed table support for precise guidance of web.
    • Two-sided cutting blades for twice the lifespan.
    • Self-sharpening shear cutting blades.
    Part #: C300110-B

    $32938.73

  5. Ledco High-Speed 30" Thoroughbred Laminator (I300220-A), Ledco

    • Intelligent heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
    • Laminating and pull rollers are covered with quality silicone rubber for superior release quality, higher lamination quality and easier cleaning.
    • Swing-away top heat shoe is Teflon coated to reduce film abrasion.
    • Built-in retractable slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
    • Dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work flat and wrinkle free.
    Part #: I300220-A

    $19962.01

  6. Ledco HD 25 Workhorse 25" Laminator with Stand (7025500), Ledco

    • Intelligent heat controllers. These heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
    • Laminating and pull rollers. These rollers are covered with quality silicone rubber for superior release quality, higher lamination quality, and easier cleaning. The laminating rollers and pull rollers are interchangeable.
    • Removable heat shoes. These shoes are teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
    • Built-in retractable slitters. These slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
    • Dual tension knobs. The dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work wrinkle-free.
    Part #: 7025500

    $10794.00

  7. Ledco XL-44 44" Pouch Board Laminator (1044110-A), Ledco

    • Preset lamination pressure and speed. to make the laminator easier to use and eliminate many potential sources of problems.
    • Adjustable position laminating rollers. to provide a range of roller openings (from fully closed to 1 1/2", with 10 increments in between), to allow lamination of almost and practical substrate up to 1 1/2" in thickness.
    • Enclosed lamination rollers. to conserve energy, protect the rollers from accidental damage, and to function as a general safeguard.
    • Adjustable heat controller. to allow lamination with a wide variety of substrates, laminates, and applications (temperature range from 200 to 400 degrees F).
    • Made in the U.S.A. for reliable quality, better service, and faster parts availability.
    Part #: 1044110-A

    $5896.26

  8. Ledco Premier 4 25" Roll Laminator 110V - 4025100C (4025110-A), Ledco

    • Variable Speed. Operates at any speed up to 10 feet per minute. Thicker films are generally applied better at mid-range to lower speeds, while 1.5 mil film should be applied at mid-range to higher speeds.
    • Digital thermometer and temperature control. Makes it easy to set and maintain the right temperature. The digital indicator light flashes as the machine warms up. At set temperature the indicator light stops flashing and a ready light comes on.
    • Simple controls. Membrane switches provide a compact, reliable control pad. Icons and international symbols are used for controls and safety warnings so that understanding operation of the laminator is "intuitive" and not language dependent.
    • Slitters. Experts know the value of slitters for laminating a quantity of same-size sheets. The slitters remove the side scrap from both sides of each sheet as it goes through the laminator. This greatly reduces the amount of time required for trimming.
    • Glitch-proof threading. Threading can be the most difficult aspect of using a laminator, so the Premier 4 has built-in threading aids. The top idler is guarded from the top heat shoe for safety and easy threading. The bottom idler is attached to the feed tray. Once the upper and lower webs of film have been run through the machine, bottom idler threading is automatic when the operator puts the feed tray on the machine.
    Part #: 4025110-A

    $3299.00

  9. Quartet Bubble Magnets with Printed Days Of The Week Text 9pk (QRT-79223), Clearance Products

    • Bubble magnets come in assorted designs.
    • Hang papers from any metal surface including magnetic dry-erase boards.
    • Each magnet displays a day of the week.
    • 9 pack includes 7 days and 2 extra magnets
    • Bubble Magnets cling to most metal surfaces
    Part #: QRT-79223

    $4.01

  10. HSM Securio P36ic IntelligentDrive Level P-4 Cross Cut Shredder (HSM-1853), Brands

    • Drive and operating concept IntelligentDrive. Intelligent paper jam prevention due to the intelligent paper jam prevention feature, the system recognises automatically and quickly whether too much paper has been fed in. The machine goes into reverse or increases the power temporarily and pulls the paper in.
    • Operation via touch display. Operation via touch display with Intuitive operation and multi-language menu selection via the high resolution 4.3" touch display. Relevant information such as operating modes and status reports are displayed. Consumable material, machine and contact details can be called up.
    • Intelligent paper jam prevention. Due to the intelligent paper jam prevention feature, the system recognises automatically and quickly whether too much paper has been fed in. The machine goes into reverse or increases the power temporarily and pulls the paper in.
    • Low power consumption. The stand-by and automatic switch-off features ensure a high degree of energy saving when the shredder is not in use.
    • For continuous operation. Continuous Duty Operation ensures continual shredding with no down time.
    Part #: HSM-1853

    $2607.83

  11. HSM Securio P36is IntelligentDrive 1/8" Level P-2 Strip Cut Shredder (HSM-1850), Brands

    • Drive and operating concept IntelligentDrive. Intelligent paper jam prevention due to the intelligent paper jam prevention feature, the system recognises automatically and quickly whether too much paper has been fed in. The machine goes into reverse or increases the power temporarily and pulls the paper in.
    • Operation via touch display. Operation via touch display with Intuitive operation and multi-language menu selection via the high resolution 4.3" touch display. Relevant information such as operating modes and status reports are displayed. Consumable material, machine and contact details can be called up.
    • Intelligent paper jam prevention. Due to the intelligent paper jam prevention feature, the system recognises automatically and quickly whether too much paper has been fed in. The machine goes into reverse or increases the power temporarily and pulls the paper in.
    • Low power consumption. The stand-by and automatic switch-off features ensure a high degree of energy saving when the shredder is not in use.
    • For continuous operation. Continuous Duty Operation ensures continual shredding with no down time.
    Part #: HSM-1850

    $2163.07

  12. Count AccuCreaser Air Modular Digital Creasing Machine (CATMDCM), Scoring Equipment

    • Provides modes for creasing, perforating or feeding.
    • Bottom vacuum feed with sheet spacing control.
    • CAM actuated compression creasing ensures maximum crease accuracy.
    • Automated distance recognition allows auto setups for your most common creases and corresponding folds, including perfect bind.
    • Perform up to 4 perfs at a time (including micro perf).
    Part #: CATMDCM

    $14170.00

  13. Count PerfMaster Air V3 18" Automatic Perforating and Scoring Machine (CPMASTERV3), Scoring Equipment

    • New and improved heavy-duty air feed eliminating marking and scuffing on documents
    • Interchangeable paper caliper used for open edge carbonless forms to heavy gauge glossy stock
    • 18" wide feed capacity
    • Quickly change from perfing to scoring in a matter of minutes
    • Simple to use one button operation speed control
    Part #: CPMASTERV3

    $10023.00

  14. Paitec ES5000Z Low-Volume Desktop Folder and Pressure Sealer (PES5000Z), Pressure Sealers

    • Perfect Sealing Quality
    • Fold Settings Can Be Changed in Seconds
    • Manual Feeder for Pre-Folded Items
    • Anti-Jam System
    • Easy to Maintain
    Part #: PES5000Z

    $3802.86

  15. Standard Semi Automatic 17.5" Electric Paper Cutter (PC-450), Electric Paper Cutters

    • Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
    • Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
    • Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
    • Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.
    • Cutting Witdh: 17.5"
    Part #: PC-450

    $6390.00

  16. Standard Electric 17" Desktop Paper Cutter (PC-P430), Electric Paper Cutters

    • Dual Push Buttons: The PC-P430 is activated only when the safety cover is closed and both cutting buttons are simultaneously pressed. The two buttons are sufficiently spaced to ensure operator safety.
    • Safety Covers: The cutter is equipped with front and rear safety covers. The front cover includes a safety switch to prevent unsafe operation.
    • Press Section: An automatic clamping press moves simultaneously with the cutting knife. A special cutout is provided to prevent book spines from crushing.
    • Cutting Line: Illuminated cut line conveniently identifies the cut position for easy sheet positioning
    • Cut Stick Lift Lever: The cut stick is easily replaced by using the integrated lift lever.
    Part #: PC-P430

    $4770.00

  17. GBC Badgemates Black Convertible Card Holder (3748070-1ea), Id Supplies

    • Holds PVC ID cards. Designed to be used in a secure facility using magnetic card readers.
    • Can be worn either vertically or horizontally.
    • Card holder can be worn on a belt or around the neck with a lanyard or clipped to clothing or backpack for quick and easy access.
    • These holders provide dependable access to Smart Cards and other ID cards not capable of being slot punched.
    • GBC Part Number: 3748070
    Part #: 3748070-1ea

    $1.99

  18. James Burn Lhermite AlphaDoc MK4 14" Punch - 3-Hole Loose-Leaf Die Set (04ALPHAMK43H), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 3-Hole Looseleaf
    • Hole Shape: Round
    • Hole Size: 8mm
    • Part Number: 04ALPHAMK43H
    Part #: 04ALPHAMK43H

    $2500.00

  19. James Burn Lhermite AlphaDoc MK4 14" Punch - Plastic Comb Binding Die Set (04ALPHAMK4PCD), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : Plastic Comb Binding
    • Hole Shape: Rectangular
    • Hole Size: 8mm x 3mm
    • Part Number: 04ALPHAMK4PCD
    Part #: 04ALPHAMK4PCD

    $3700.00

  20. James Burn Lhermite AlphaDoc MK4 14" Punch - 2.5:1 Oval Hole coil Die Set (04ALPHAMK4251), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 2.5:1 Pitch (.400)
    • Hole Shape: Oval
    • Hole Size: 6.5mm x 5.5mm
    • Part Number: 04ALPHAMK4251
    Part #: 04ALPHAMK4251

    $4350.00

  21. James Burn Lhermite AlphaDoc MK4 14" Punch - 3:1 Oval Hole Coil Die Set (04ALPHAMK431O), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 3:1 Pitch
    • Hole Shape: Oval
    • Hole Size: 6.5mm x 5.5mm
    • Part Number: 04ALPHAMK431O
    Part #: 04ALPHAMK431O

    $4600.00

  22. James Burn Lhermite AlphaDoc MK4 14" Punch - 4:1 Round Hole Coil Die Set (04ALPHAMK441R), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 4:1 Pitch (.248)
    • Hole Shape: Round
    • Hole Size: 4.75mm
    • Part Number: 04ALPHAMK441R
    Part #: 04ALPHAMK441R

    $2700.00

  23. James Burn Lhermite AlphaDoc MK4 14" Punch - 2:1 Square Hole Wire Die Set (04ALPHAMK421S), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 2:1 Pitch
    • Hole Shape: Square
    • Hole Size: 6mm
    • Part Number: 04ALPHAMK421S
    Part #: 04ALPHAMK421S

    $3050.00

  24. James Burn Lhermite AlphaDoc MK4 14" Punch - 2:1 Round Hole Wire Die Set (04ALPHAMK421R), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 2:1 Pitch
    • Hole Shape: Round
    • Hole Size: 6mm
    • Part Number: 04ALPHAMK421R
    Part #: 04ALPHAMK421R

    $2150.00

  25. James Burn Lhermite AlphaDoc MK4 14" Punch - 3:1 Square Hole Wire Die Set (04ALPHAMK431S), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 3:1 Pitch
    • Hole Shape: Square
    • Hole Size: 4mm
    • Part Number: 04ALPHAMK431S
    Part #: 04ALPHAMK431S

    $3400.00

  26. James Burn Lhermite AlphaDoc MK4 14" Punch - 3:1 Round Hole Wire Die Set (04ALPHAMK431R), James Burn

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 3:1 Pitch
    • Hole Shape: Round
    • Hole Size: 4mm
    • Part Number: 04ALPHADOC31R
    Part #: 04ALPHAMK431R

    $2300.00

  27. HSM 40VL Baler for FA400 Shredders (HSM6111167), Brands

    • Automatically and economically compresses material into bales suitable for recycling.
    • Ejection lever for quick and easy removal of baled material.
    • Wear-free hydraulic system requires very little maintenance.
    • Shredder/baler combinations are manufactured with dust-free connections.
    • Easy to use control panel for a safe and efficient operation.
    Part #: HSM6111167

    $12820.01

  28. HSM 411.2 OMDD High Security Paper Shredder (HSM1570), Brands

    • Made in Germany: All HSM Classic & Securio Models are Made in Germany. Precision Engineering. TAA Compliant.
    • Solid Steel Cutting Cylinders: Cutting Heads are Manufactured from 100% Steel. Maintains High Cutting Capabilities While Using Less Energy. V-groove Technology Ensures Precise Cutting.
    • Anti-Jam Technology with Reverse Function: Prevents Jams When Machine is Overloaded. Increasing Productivity. Saves Unanticipated Repair Costs.
    • High Security EPL Listed: Meets D.O.D. and NSA/CSS 02-01 Mandatory Security Requirements. EPL Listed to Ensure that Sensitive Documents are Destroyed at the Highest Security Level.
    • Continuous Duty Motor: Allows for Continual Shredding with no Down Time. Longer Run Time Resulting in Reduced Labor Cost. Increasing Productivity.
    Part #: HSM1570

    $3088.57

  29. Dahle Shredder Oil 12oz Bottles - 6pk (20721), Paper Shredders

    • Maintains peak performance
    • High cling / low dust retention
    • Specially formulated so it won't leave any residue that could attract dust and clog the shredding mechanism
    • Quantity: 4 (1gal. bottles)
    • Old Product Number: 20740
    Part #: 20721

    $36.85

  30. Custom Length Binding Combs 100pk (CLCOMBS), Binding Supplies

    • Product Type: Binding Combs
    • Product Number: BIND1010
    • Hole Pattern: 19 Hole
    • Size: Variable
    • Length: Variable
    Part #: CLCOMBS

    $11.19

Items 1-15 of 22

Display Type List Grid
Page:   1   100   200   300   440   450   460   470   480   490   500   510   520   529   530   531   532   533   534   535   536   537   538   539   540   541   542   543   544   545   546   547   548   549   550   551   552   553   554   555   556   557   558   560   570   580   590   600   610   620   630   640   700   800   900   1,000   1,091