Product listing: Duplo DF-850 Friction-Feed Tabletop Paper Folder - Open Box (MYR-19-185-8) to Flipside 72" x 27" Black Magnetic Whiteboard Rolling Easel (FS-19112)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Duplo DF-850 Friction-Feed Tabletop Paper Folder - Open Box (MYR-19-185-8), Finishing Equipment

    • Folds up to 241 sheets per minute.
    • 500-sheet feed capacity.
    • Performs six of the most common folds and custom folds.
    • Can process a minimum paper size of 3.59" x 5.04" (91 x 128mm)
    • Cross folding feature for right angle folds.
    Part #: MYR-19-185-8

    $1250.00

  2. Keencut 60" Table Edge Rotary Cutter (TE) - 60631 - Open Box (MYR-19-188-8), Cutters

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: MYR-19-188-8

    $450.00

  3. GoECOlife GMC225Pi Platinum 22-Sheet Level 4 Under Desk Micro-Cut Shredder - Open Box (MYR-17-849-8), Clearance Equipment

    • Your best option for peace of mind. The microcut blades destroy your most sensitive documents into tiny 0.16" x 0.39" (4 x 10mm) unreadable particles. That’s the equivalent of a letter sized sheet of paper separated into over 1,500 particles. The smaller shred size reduces waste volume so you empty the bin less often.
    • Compact and uniquely designed to fit under any standard height (27”) desk while featuring an ample 7.85 gallon waste bin.
    • The only shredder of its kind features horizontal front-feeding for efficient shredding right from your seat.
    • The heavy-duty, commercial-grade motor shreds documents continuously for up to 20 minutes to handle your heaviest shred jobs. Also shreds credit cards, CD/DVDs.
    • GoECO Power-Saving Technology virtually eliminates vampire energy loss. The shredder will automatically power down if left idle – not just “asleep” but completely powered OFF – thereby, reducing electricity consumption waste.This product is carbon neutral*. The manufacture and distribution (including end-of-life and recycling) of this machine has been carbon offset.
    Part #: MYR-17-849-8

    $250.39

  4. Morgana DocuCrease 52 Manual 20.5" Hand-Operated Creaser - Open Box (MYR-19-182-8), Finishing Equipment

    • Fast & easy to setup.
    • Takes stock up to 0.015" (approx 150lb cover).
    • Rule and matrix guaranteed for life.
    • Left or right handed operation.
    • Heavy duty.
    Part #: MYR-19-182-8

    $425.00

  5. Aamstamp Sprite Stamping Machine - Open Box (MYR-19-189-8), Finishing Equipment

    • User friendly accessories: all machined to aerospace tolerances.
    • All 100% made in the U.S.A.
    • Fully warranted for 1 year.
    • 6" print width: every line can be up to 6".
    • Capable of printing full 2.5" x 6" area.
    Part #: MYR-19-189-8

    $580.00

  6. MAX Corp Heavy Duty 30 to 150 Sheet Flat Clinch Stapler - HD-12F - Open Box (MYR-19-109-8), Clearance Equipment

    • Color: White
    • Stapling Capacity: 30 to 150 Sheets
    • Load Capacity: 100 Staples
    • Recommended Staples: MAX 1210FA-H, MAX 1213FA-H, MAX 1215FA-H, MAX 1217FA-H
    • Durable metal frame for heavy duty stapling
    Part #: MYR-19-109-8

    $65.22

  7. PostMark 3056 Automatic Letter Opener - Open Box (MYR-18-138-8), Mail Room Equipment

    • Milling Cutter Technology. Protects the contents from being cut or damaged. Removes up to 3mm (1/8") of the envelope edge. The removed material is in the form of tiny chips, which are deposited in the waste bin. Creates a soft, feathered edge opening, which prevents paper cuts and gives easy access to the contents.
    • Mixed Thickness Separator. This separator design ensures that only one envelope passes through the machine at a time maximizing separation and improving cut quality.
    • High Speed. Opens up to 24,000 envelopes per hour. Opens mixed mail, from the smallest to the largest, completely. Opens up to 6mm (1/4") thick envelopes. Entire system built to handle large flats and envelopes.
    • Simple and Reliable. High degree of operational reliability.
    • Heavy Duty. Solid metal construction throughout. Made of steel using the highest quality of components. Has two motors for better performance and a longer life.
    Part #: MYR-18-138-8

    $3730.65

  8. MasterBind Atlas 190 Metal Bind Finisher - 1162-11000 - Open Box (MYR-19-150-8), Clearance Equipment

    • CoverGuide System providing a easy binding process
    • Capable to bind and de-bind up to 190 pages
    • Foil embossing for a more personalized customization
    • Paper Sizes: 11 x 8 1/2 portrait, 8 1/2 x 11 Landscape, 11 x 9 portrait oversize for tabs and 8 1/2 x 11 1/2 Landscape oversized for Tabs
    • Patented metal channel requires little effort
    Part #: MYR-19-150-8

    $235.72

  9. Powis Parker Fastback Scoring/Creasing Machine - PPSM - Open Box (MYR-19-053-8), Clearance Equipment

    • Transparent die guide lets you see where each score goes
    • Patented Centering Guide eliminates any guesswork from the process
    • No make-ready is required
    • Interchangeable dies let you choose between single and double scores
    • Ergonomic design helps avoid work-related injuries
    Part #: MYR-19-053-8

    $725.00

  10. Carl DC-200N 12" Professional Rotary Paper Trimmer (CUI72012), Rotary Trimmers

    • Easy operation sliding handle.
    • Rotary blade is in a fixed tight position for extra safety and more precise accurate cut.
    • Double sided metal calibrated base for accuracy and added stability.
    • The cutting blade rests directly next to the cutting rail, so there’s no guessing where the blade
    • Cuts up to 15 sheets of 20lbs paper.
    Part #: CUI72012

    $35.67

  11. Keencut Evolution3 142" BenchTop Cutter (61290), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61290

    $1777.50

  12. Renz Eco C 2:1 Pitch Wire Binding Machine - Open Box (MYR-3277), Clearance Equipment

    • length, width, height: 14" x 22" x 7.5" [36, 55, 19 cm]
    • weight: 28.6 lb. [13 kg]
    • selectable punch pins: no
    • punching thickness: .090" / 25 sheets (20# paper)
    • adjustable margin: no
    Part #: MYR-3277

    $393.50

  13. Keencut Evolution3 124" BenchTop Cutter (61289), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61289

    $1777.50

  14. Keencut Evolution3 104" BenchTop Cutter (61288), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61288

    $1539.00

  15. Keencut Evolution3 84" BenchTop Cutter (61287), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61287

    $1399.50

  16. Keencut Evolution3 64" BenchTop Cutter (61286), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61286

    $1269.00

  17. Keencut Evolution3 44" BenchTop Cutter (61285), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61285

    $1152.00

  18. Premier Heavy Duty 36" Wood Paper Trimmer With Clamp - WC36 - Open Box (MYR-16-527), Cutters

    • Heavy-duty 3/4" thick wood base
    • Self-sharpening stainless steel blades cut up to 20 sheets at once
    • Cutting length: 36"
    • Accurately cuts paper, mat board, cardboard, film, tissue and textiles
    • Permanent 1/2" grid and dual English and metric rulers
    Part #: MYR-16-527

    $206.02

  19. Rotatrim Stand & Waste Catcher for 61" Technical / DigiTech Trimmers - Open Box (MYR-3162), Cutters

    • Constructed from a steel frame
    • Sports a black finish
    • Provides rigid support while operating at an ideal height of 34 inches
    • For professional rotary trimmers
    • Floor Stand Saves Space and Expense
    Part #: MYR-3162

    $189.50

  20. Swingline 36" ClassicCut Ingento Guillotine Trimmer - 1182 - Open Box (MYR-18-098-8), Cutters

    • Guillotine cutting of up to 15 sheets at once; 36" cutting length
    • Steel tension spring keeps guillotine blade arm in place during active use
    • Alignment grid and dual scale ruler for precise measuring
    • Protective guard rail safety feature plus blade latch hook to lock blade while in storage
    • Limited 10-year warranty
    Part #: MYR-18-098-8

    $265.17

  21. MBM 307A Automatic Tabletop Paper Folding Machine - Open Box (MYR-18-182-8), Finishing Equipment

    • Three roller friction feed system
    • Pre-programmed with 6 standard folds
    • Stores 18 custom folds in memory
    • Control panel includes LED four digit counter with batch and total functions
    • Test button folds 2 sheets for inspection
    Part #: MYR-18-182-8

    $2944.40

  22. Martin Yale 1616 Electric Letter Opener - Open Box (MYR-19-123-8), Finishing Equipment

    • Automatically feeds and opens envelopes when manually inserted.
    • Easy one-hand operation.
    • Accepts standard-size business envelopes.
    • Blades are fully enclosed to protect fingers.
    • Non-skid rubber suction feet keep machine in place.
    Part #: MYR-19-123-8

    $35.93

  23. Keencut Evolution3 142" SmartFold Cutter (61390), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Swing-down under-bench storage to leave work surface clear.
    Part #: 61390

    $2601.00

  24. Keencut Evolution3 124" SmartFold Cutter (61389), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Swing-down under-bench storage to leave work surface clear.
    Part #: 61389

    $2236.50

  25. Keencut Evolution3 104" SmartFold Cutter (61388), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Swing-down under-bench storage to leave work surface clear.
    Part #: 61388

    $2007.00

  26. Keencut Evolution3 84" SmartFold Cutter (61387), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Swing-down under-bench storage to leave work surface clear.
    Part #: 61387

    $1827.00

  27. Keencut Evolution3 64" SmartFold Cutter (61386), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Swing-down under-bench storage to leave work surface clear.
    Part #: 61386

    $1656.00

  28. Keencut Evolution3 124" FreeHand Cutter Bar (61279), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    • Minimal setup: calibrated 'out of the box' accuracy.
    Part #: 61279

    $1287.00

  29. Keencut Evolution3 104" FreeHand Cutter Bar (61278), Substrate Cutters

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    • Minimal setup: calibrated 'out of the box' accuracy.
    Part #: 61278

    $1206.00

  30. Flipside 72" x 27" Black Magnetic Whiteboard Rolling Easel (FS-19112), Brands

    • Features a premium quality, easy-to-clean, non-ghosting magnetic covered steel surface
    • 72" x 27" Board Size
    • Locking wheels make easel simple to move
    • Ideal for home, school, or office use.
    • Some assembly required.
    Part #: FS-19112

    $178.57

Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80   90   100   200   300   400   500   600   700   800   900   1,000   1,106