Product listing: Mactac Permacolor ColorTrans Optically Clear 51" x 150' Perm/Rem Mounting Film (CT2251L150) to Mactac Permacolor RAYZor 1.5mil Clear Gloss Cast Vinyl Overlaminate (MACTAC-LF364G)
-
Mactac Permacolor ColorTrans Optically Clear 51" x 150' Perm/Rem Mounting Film (CT2251L150)
- Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
- Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
- Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
- Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
- General Comments
Part #: CT2251L150 -
Mactac Permacolor ColorTrans Optically Clear 61" x 150' Perm/Rem Mounting Film (CT2261L150)
- Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
- Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
- Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
- Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
- General Comments
Part #: CT2261L150 -
Mactac Permacolor PermaTrans Optically Clear Mounting Film (MACTAC-PUV21)
- Features and Benefits:
- Industry’s best clarity.
- UV inhibitors reduce color fade.
- Aggressive solvent acrylic adhesive.
- Clear liners for inspection of product before lamination.
Part #: MACTAC-PUV21 -
Mactac Permacolor PermaTrans 41" x 150' Optically Clear Mounting Film (PUV2141W41L150)
- Features and Benefits:
- Industry’s best clarity.
- UV inhibitors reduce color fade.
- Aggressive solvent acrylic adhesive.
- Clear liners for inspection of product before lamination.
Part #: PUV2141W41L150 -
Mactac Permacolor PermaTrans 51" x 150' Optically Clear Mounting Film (PUV2151W51L150)
- Features and Benefits:
- Industry’s best clarity.
- UV inhibitors reduce color fade.
- Aggressive solvent acrylic adhesive.
- Clear liners for inspection of product before lamination.
Part #: PUV2151W51L150 -
Mactac Permacolor PermaTrans 51" x 265' Optically Clear Mounting Film (PUV2151W51L265)
- Features and Benefits:
- Industry’s best clarity.
- UV inhibitors reduce color fade.
- Aggressive solvent acrylic adhesive.
- Clear liners for inspection of product before lamination.
Part #: PUV2151W51L265 -
Mactac Permacolor PermaTrans 61" x 150' Optically Clear Mounting Film (PUV2161W61L150)
- Features and Benefits:
- Industry’s best clarity.
- UV inhibitors reduce color fade.
- Aggressive solvent acrylic adhesive.
- Clear liners for inspection of product before lamination.
Part #: PUV2161W61L150 -
Mactac Permacolor PermaGard SAG 6.9mil Clear Anti-Graffiti / Window Protection Overlaminates (MACTAC-CVSAG)
- Features and Benefits:
- Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
- Increase the impact resistance of windows
- Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
- Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
Part #: MACTAC-CVSAG -
Mactac Permacolor PermaGard SAG 6.9mil 48" x 82' Clear Anti-Graffiti / Window Protection Overlaminate (CVSAG175)
- Features and Benefits:
- Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
- Increase the impact resistance of windows
- Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
- Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
Part #: CVSAG175 -
Formax Rotary Perforator and Creaser (FD95)
- Standard Features:
- Simple set-up & operation, with automatic feeding.
- Up to 5 parallel perforations and/or creases in a single pass.
- Standard set-up includes two perforating wheels, one creasing wheel, 2 guide strips.
- Interchangeable perforating/creasing wheels.
Part #: FD95 -
Mactac Permacolor PermaGard SAG 6.9mil 60" x 82' Clear Anti-Graffiti / Window Protection Overlaminate (CYSAG175)
- Features and Benefits:
- Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
- Increase the impact resistance of windows
- Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
- Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
Part #: CYSAG175 -
Fujipla ALM Laminator Elegant Silk Matte Roll Film (ECOSILKMATTE)
- Compatible with Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
- Designed and developed for On Demand Digital prints
- ALM films are ASAP Film (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
- Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
- Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
Part #: ECOSILKMATTE -
Mactac Permacolor PermaGard SAG 2mil 54" x 150' Clear Anti-Graffiti / Window Protection Overlaminate (SAG53W54L150)
- Features and Benefits:
- Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
- Increase the impact resistance of windows.
- Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
- Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
Part #: SAG53W54L150 -
Mactac Permacolor PermaFlex Lustex IP6200 5mil Clear Rigid Overlaminates (MACTAC-IP6200)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: MACTAC-IP6200 -
Mactac Permacolor PermaFlex Lustex 5mil Clear 37" x 150' Rigid Overlaminate (IP6202W37L150)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: IP6202W37L150 -
Mactac Permacolor PermaFlex Lustex 5mil Clear 51" x 150' Rigid Overlaminate (IP6202W51L150)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: IP6202W51L150 -
Mactac Permacolor PermaFlex Lustex IP6100 10mil Clear Rigid Overlaminates (MACTAC-IP6100)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: MACTAC-IP6100 -
Mactac Permacolor PermaFlex Lustex 10mil Clear 37" x 150' Rigid Overlaminate (IP6107W37L150)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: IP6107W37L150 -
Mactac Permacolor PermaFlex Lustex 10mil Clear 51" x 150' Rigid Overlaminate (IP6102W51L150)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: IP6102W51L150 -
Mactac Permacolor PermaFlex Lustex IP6000 15mil Clear Rigid Overlaminates (MACTAC-IP600)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: MACTAC-IP600 -
Mactac Permacolor PermaFlex Lustex 15mil Clear 37" x 150' Rigid Overlaminate (IP6007W37L150)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: IP6007W37L150 -
Mactac Permacolor PermaFlex Lustex 15mil Clear 51" x 150' Rigid Overlaminate (IP6002W51L150)
- Features and Benefits:
- Textured lustex finish polycarbonate
- Eliminates glare
- Three year outdoor / Five year indoor durability
- Protects from abrasion and moisture
Part #: IP6002W51L150 -
Mactac Permacolor 6300 Metallic Enhancers Clear Gloss Overlaminates (MACTAC-CY63980)
- Features and Benefits:
- Five year outdoor durability
- Two enhancers finishes
- Typical Uses:
- Overlaminate - flat, slightly curved applications
Part #: MACTAC-CY63980 -
Mactac Permacolor Enhancers 3mil Clear 54" x 50' Silver Metallic Gloss Overlaminate (CY63980054)
- Features and Benefits:
- Five year outdoor durability
- Two enhancers finishes
- Typical Uses:
- Overlaminate - flat, slightly curved applications
Part #: CY63980054 -
Mactac Permacolor Enhancers 2.5mil Clear 54" x 50' Brilliant Crystal Metallic Gloss Overlaminate (CY63980154)
- Features and Benefits:
- Five year outdoor durability
- Two enhancers finishes
- Typical Uses:
- Overlaminate - flat, slightly curved applications
Part #: CY63980154 -
Mactac Permacolor PermaGard 1mil 54" x 150' Gloss Clear Dry-Erase Overlaminate (PGD6054L150)
- Features and Benefits:
- Gloss finish enhances appearance of the digital image
- UV inhibitors protect image from color fade
- Dry erase capabilities
- Short-term applications
Part #: PGD6054L150 -
Mactac Permacolor RAYZor 1.5mil Clear Matte Cast Vinyl Overlaminates (MACTAC-LF363G)
- Features and Benefits:
- Built-in UV protection
- Part of the B•free application warranty
- Typical Uses:
- Highly conformable for vehicle graphics, fleet, marine and rough wall graphics
Part #: MACTAC-LF363G -
Mactac Permacolor RAYZor 1.5mil 54" x 150' Clear Matte Cast Vinyl Overlaminate (LF3638G)
- Physical Properties Property Typical Values Test Method Thickness, inches (µm) Film plus adhesive Total product 0.0025 (64) 0.0039 (100) ASTM D-645 Peel Adhesion lb./in. (N/25mm) 180° on stainless steel -20 min - 24 hrs. 3.0 (13.1) 3.7 (16.5) PSTC-1 Quick Tack, lb./in² (N/25mm) Stainless Steel 2.5 (11) FTM - 9 Dimensional Stability, (%) 48 hours @ 158°F max 0.01 FTM - 14 10” x 10” Sample Bonded to aluminum Gloss (60°) 2 – 10 Temperature Ranges Minimum Application: End Use: 50°F (+10°C) -50°F to 225°F (-45°C to 107°C) Surface Burning Characteristics (Meets ANSI, NFPA, and IFC as class A) Flame Spread Smoke Density 0 30 ASTM E84-01 or ANSI/NFPA 255 or IFC 8-1 Adhesive pH Neutral TAPPI-529
- Chemical Resistance Salt Water Spray .................... ASTM B 117-03
- 100 hours @ 5% solution ........... no change Water Immersion
- 100 hours immersed @ RT ........... no change Other immersion tests show:
- Gasoline (30 min.) ........... No effect
Part #: LF3638G -
Mactac Permacolor RAYZor 1.5mil 60" x 150' Clear Matte Cast Vinyl Overlaminate (LF3639G)
- Physical Properties Property Typical Values Test Method Thickness, inches (µm) Film plus adhesive Total product 0.0025 (64) 0.0039 (100) ASTM D-645 Peel Adhesion lb./in. (N/25mm) 180° on stainless steel -20 min - 24 hrs. 3.0 (13.1) 3.7 (16.5) PSTC-1 Quick Tack, lb./in² (N/25mm) Stainless Steel 2.5 (11) FTM - 9 Dimensional Stability, (%) 48 hours @ 158°F max 0.01 FTM - 14 10” x 10” Sample Bonded to aluminum Gloss (60°) 2 – 10 Temperature Ranges Minimum Application: End Use: 50°F (+10°C) -50°F to 225°F (-45°C to 107°C) Surface Burning Characteristics (Meets ANSI, NFPA, and IFC as class A) Flame Spread Smoke Density 0 30 ASTM E84-01 or ANSI/NFPA 255 or IFC 8-1 Adhesive pH Neutral TAPPI-529
- Chemical Resistance Salt Water Spray .................... ASTM B 117-03
- 100 hours @ 5% solution ........... no change Water Immersion
- 100 hours immersed @ RT ........... no change Other immersion tests show:
- Gasoline (30 min.) ........... No effect
Part #: LF3639G -
Mactac Permacolor RAYZor 1.5mil Clear Gloss Cast Vinyl Overlaminate (MACTAC-LF364G)
- Features and Benefits:
- Built-in UV protection
- Optically clear gloss and gloss finishes
- Part of the B•free® application warranty
- Five to seven years outdoor durability
Part #: MACTAC-LF364G
