Product listing: Mactac Permacolor PermaPrint White 37" x 150' Perm/Perm Back Mounting Film (IP5007) to GBC / Swingline P110 Manual Proclick Binding Machine - 7708185 - Open Box (MYR-16-476-2)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Mactac Permacolor PermaPrint White 37" x 150' Perm/Perm Back Mounting Film (IP5007)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5007

    $333.59

  2. Mactac Permacolor PermaPrint White 38" x 150' Perm/Perm Back Mounting Film (IP5008)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5008

    $340.59

  3. Mactac Permacolor PermaPrint White 51" x 150' Perm/Perm Back Mounting Film (IP5002)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5002

    $445.89

  4. Mactac Permacolor PermaPrint White 51" x 400' Perm/Perm Back Mounting Film (IP5001)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5001

    $1058.89

  5. Mactac Permacolor PermaPrint White 54" x 150' Perm/Perm Back Mounting Film (IP5040)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5040

    $562.89

  6. Mactac Permacolor ColorTrans Optically Clear 41" x 150' Perm/Rem Mounting Film (CT2241L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2241L150

    $431.19

  7. Mactac Permacolor ColorTrans Optically Clear 51" x 150' Perm/Rem Mounting Film (CT2251L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2251L150

    $531.49

  8. Mactac Permacolor ColorTrans Optically Clear 54" x 150' Perm/Rem Mounting Film (CT2254L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2254L150

    $561.49

  9. Mactac Permacolor ColorTrans Optically Clear 61" x 150' Perm/Rem Mounting Film (CT2261L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2261L150

    $631.90

  10. Swingline Optima 70 Electric Stapler - 48210 - Open Box (MYR-19-122-8)

    • Fast and quiet, this electric stapler is Jam Free Guaranteed and not disruptive in the office
    • Staples up to 70 sheets at once with Optima™ High Capacity Staples
    • Features a user control switch - choose automatic stapling or use the manual mode to activate the motor on your command
    • Flat clinch stapling forms staples flat on the back of your paper so stacks of stapled documents stay neat and do not topple over
    • Included an adjustable depth guide for accurate positioning. Stack height gauge ensures your paper stack doesn't exceed the maximum sheet count.
    Part #: MYR-19-122-8

    $269.08

  11. Tamerica Optimus-46i 4:1 Pitch Coil Binding Machine - Open Box (MYR-19-119-8)

    • Manual Punch w/Electric Coil Inserter.
    • Electric Coil Inserter w/Foot Pedal operation.
    • Punches up to 20 sheets per lift (20 lbs paper).
    • 11.7" Punch Length with open throat.
    • Horizontal Paper Load.
    Part #: MYR-19-119-8

    $179.10

  12. Mactac Permacolor ColorTrans Optically Clear 54" x 150' Perm/Self-Wetting Rem Mounting Film (CT2554W54L150)

    • Physical Properties Property Typical Values Test Method Thickness, inches (µm) Carrier plus adhesive Total product 0.0032 (81) 0.007 (178) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Glass - 30 minutes 4.6 (17.5) 1.0 (5.2) 5.2 (22.7) 1.0 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 300°F (-29° to 150°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Durability CT2500 will give satisfactory performance for up to 3 years outdoor. Indoor durability can be up to 20 years under standard conditions and with high quality printing inks.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    Part #: CT2554W54L150

    $628.29

  13. Mactac Permacolor PermaTrans 41" x 150' Optically Clear Mounting Film (PUV2141W41L150)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: PUV2141W41L150

    $1095.00

  14. Mactac Permacolor PermaTrans 51" x 150' Optically Clear Mounting Film (PUV2151W51L150)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: PUV2151W51L150

    $1289.89

  15. Mactac Permacolor PermaTrans 61" x 150' Optically Clear Mounting Film (PUV2161W61L150)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: PUV2161W61L150

    $1590.59

  16. Mactac Permacolor PermaGard SAG 6.9mil 48" x 82' Clear Anti-Graffiti / Window Protection Overlaminate (CVSAG175)

    • Features and Benefits:
    • Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
    • Increase the impact resistance of windows
    • Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
    • Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
    Part #: CVSAG175

    $452.99

  17. Mactac Permacolor PermaGard SAG 6.9mil 60" x 82' Clear Anti-Graffiti / Window Protection Overlaminate (CYSAG175)

    • Features and Benefits:
    • Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
    • Increase the impact resistance of windows
    • Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
    • Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
    Part #: CYSAG175

    $489.19

  18. Mactac Permacolor PermaGard SAG 2mil 54" x 150' Clear Anti-Graffiti / Window Protection Overlaminate (SAG53W54L150)

    • Features and Benefits:
    • Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
    • Increase the impact resistance of windows.
    • Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
    • Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
    Part #: SAG53W54L150

    $657.59

  19. Mactac Permacolor PermaFlex Lustex 5mil Clear 37" x 150' Rigid Overlaminate (IP6202W37L150)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: IP6202W37L150

    $639.59

  20. Mactac Permacolor PermaFlex Lustex 5mil Clear 51" x 150' Rigid Overlaminate (IP6202W51L150)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: IP6202W51L150

    $873.59

  21. Mactac Permacolor PermaFlex Lustex 10mil Clear 37" x 150' Rigid Overlaminate (IP6107W37L150)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: IP6107W37L150

    $892.99

  22. Mactac Permacolor PermaFlex Lustex 10mil Clear 51" x 150' Rigid Overlaminate (IP6102W51L150)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: IP6102W51L150

    $1223.29

  23. Mactac Permacolor PermaFlex Lustex 15mil Clear 37" x 150' Rigid Overlaminate (IP6007W37L150)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: IP6007W37L150

    $1103.09

  24. Mactac Permacolor PermaFlex Lustex 15mil Clear 51" x 150' Rigid Overlaminate (IP6002W51L150)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: IP6002W51L150

    $1510.89

  25. Mactac Permacolor Enhancers 3mil Clear 54" x 50' Silver Metallic Gloss Overlaminate (CY63980054)

    • Features and Benefits:
    • Five year outdoor durability
    • Two enhancers finishes
    • Typical Uses:
    • Overlaminate - flat, slightly curved applications
    Part #: CY63980054

    $349.09

  26. Mactac Permacolor Enhancers 2.5mil Clear 54" x 50' Brilliant Crystal Metallic Gloss Overlaminate (CY63980154)

    • Features and Benefits:
    • Five year outdoor durability
    • Two enhancers finishes
    • Typical Uses:
    • Overlaminate - flat, slightly curved applications
    Part #: CY63980154

    $349.09

  27. Akiles DuoMac C31 Plastic Comb and 3:1 Wire Binding Machine - Open Box (MYR-18-184-8)

    • With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
    • Punch handles
    • Punch Throat & Ruler
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
    • Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
    Part #: MYR-18-184-8

    $656.10

  28. Akiles WireMac 2:1 Manual Double Loop Wire Binding Machine - Open Box (MYR-19-057-8)

    • Heavy-Duty Design
    • 20 sheets single punching capacity (20 lbs paper).
    • 2:1 Pitch
    • 14" width punching capacity with open sides for even wider documents.
    • All dies can be independently disengaged, to allow the punching of any size document while preventing partial side-end perforation.
    Part #: MYR-19-057-8

    $306.00

  29. GBC / Swingline CombBind C450E Electric Comb Binding Machine - 7709100A - Open Box (MYR-18-047-8)

    • Includes a new "Document Separator" that divides your sheets into perfect groups ready for punching.
    • Has a new "Auto Centering System" that positions paper for perfect punching every time.
    • Uses push Button Electric Punching
    • Can punch up to 25 sheets of 20lb bond at one time.
    • Can bind books up to 500 sheets with a maximum thickness of 2"
    Part #: MYR-18-047-8

    $567.30

  30. GBC / Swingline P110 Manual Proclick Binding Machine - 7708185 - Open Box (MYR-16-476-2)

    • Punch Method: Manual
    • Punching Capacity: 15 Sheets (20lb Bond) Per Punch.
    • Max Document Thickness: 110 Sheets (5/8" Thick)
    • Document Size: 11"
    • Binding Spine Size Guide: Yes
    Part #: MYR-16-476-2

    $250.20

Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80   90   100   110   200   300   400   500   524