Product listing: Packaging Products Preferred Pack PP-983 HP High Profile Dual Turntable Pallet Stretch Wrapper (PP-983HP-DT) to Double Reverse 1/10th Cut 110lb Mylar Coated Copier Tabs (XT11010DR)
-
Packaging Products Preferred Pack PP-983 HP High Profile Dual Turntable Pallet Stretch Wrapper (PP-983HP-DT)
- Has Two turntables to double your production speeds
- Has 225% automatic powered pre-stretch with "Easy Thread Design"
- Easy to use and understand front panel
- Has a heavy duty chain drive on turntable with 18 sets of double roller turntable supports
- Easy thread design with safety door, if opened, the machine shuts off.
Part #: PP-983HP-DT -
Packaging Products Preferred Pack PP-983 HP High Profile Pallet Stretch Wrapper with Top Platten (PP-983HP-TP)
- Has top hold down platten for use on light weight or very unstable loads
- Top plate is pneumatically driven and will keep load in the proper position when turntable is spinning
- Has 225% automatic powered pre-stretch with "Easy Thread Design"
- Easy to use and understand front panel
- Has a heavy duty chain drive on turntable with 18 sets of double roller turntable supports
Part #: PP-983HP-TP -
Packaging Products PP-568ERT Large Case Erector and Bottom Sealer (PP-568ERT-Large)
- Production Speed: 9-12 carton/min
- Can erect box with dimension: 13.7"-23.6" L x 11.8"-17.7" W x 9.8"-20" H
- Has a HMI Touch Panel Control System
- Equipped with detection for no tape, tape sealing failure and tape cutting failure.
- Can erect and tape the bottom of your boxes at up to 12 cases per minute
Part #: PP-568ERT-Large -
Packaging Products PP-568ERT Medium Case Erector and Bottom Sealer (PP-568ERT-Medium)
- Production Speed: 9-12 carton/min
- Can erect box with dimension: 9.8"-20” L x 7.8"-15” W x 4.8"-20” H"
- Has a HMI Touch Panel Control System
- Equipped with detection for no tape, tape sealing failure and tape cutting failure.
- Can erect and tape the bottom of your boxes at up to 12 cases per minute
Part #: PP-568ERT-Medium -
Packaging Products PP-568ERT Small Case Erector and Bottom Sealer (PP-568ERT-Small)
- Production Speed: 9-12 carton/min
- Can erect box with dimension: 5.9"-13.8" L x 4.3"-11.8" W x 4.3-11.8" H
- Has a HMI Touch Panel Control System
- Equipped with detection for no tape, tape sealing failure and tape cutting failure.
- Can erect and tape the bottom of your boxes at up to 12 cases per minute
Part #: PP-568ERT-Small -
Packaging Products Non-Adhesive Hot-Cut Ribbon Cutter (TBC-50H)
- Adjustable temperature control.
- All electric microprocessor controlled.
- Automatic shut off - stops automatically if material runs out during operation.
- Easy to use - set length, quantity and feed speed; then press start.
- Adjustable pressure on feed roller for thin or smooth materials.
Part #: TBC-50H -
Packaging Products Heavy Duty Non-Adhesive Material Cutter (TBC-50)
- All electric microprocessor controlled.
- Automatic shut off - stops automatically if material runs out during operation.
- Easy to use - set length, quantity and feed speed; then press start.
- Adjustable pressure on feed roller for thin or smooth materials.
- Accuracy - by means of stepper motor.
Part #: TBC-50 -
Packaging Products DVD/CD Multi-Purpose Case Overwrap Machine (TS-2002)
- Speed: Adjustable to Max. 50 pcs/min.
- Power: 110VAC Single Phase 2500W
- Motor: 2Hp
- Machine Dimensions: 1350mm x 1040mm x 1640mm
- Packaged Case Dimension (L x W x H): 145mm x 220mm x 30mm Max.
Part #: TS-2002 -
Packaging Products DVD/CD Fully Automatic Overwrap Machine (JT-50)
- Speed: Approx 42 pcs/min
- Power: 110VAC Single Phase 2500W
- Motor: 1Hp
- Features: Speed Control and Auto Jam Stop
- Dimensions (L x W x H): 1200mm x 830mm x 1430mm
Part #: JT-50 -
Packaging Products Semi-Automatic Overwrap Machine (EasyOverwrapper)
- Speed: Approx 5 ppm (depending on operator)
- Change-over time: 5 - 10 Minutes
- Side heaters: Spot or full surface
- Film Width: 60 - 380mm
- Film Thickness: 20 - 40 micron
Part #: EasyOverwrapper -
Packaging Products Fully-Automatic Uniform Carton Sealer with Automatic Top Flap Folding (PP-558F)
- Piranha Tape Head with “Easy Thread” Design.
- Interchangeable Tape Heads.
- Side Pressure Rollers to Close Box Top.
- 2 Top & 2 Side Drive Belts.
- Fully Adjustable Legs From.
Part #: PP-558F -
Packaging Products Ultra-Scale Automatic Net-Weigh Single/Dual Head Scale (US-7000)
- All stainless steel contact surfaces.
- Programmable bulk & dribble setting.
- Three tray vibratory feed system.
- Nema 4 enclosure, microprocessor based controls.
- Standard 2 cubic foot supply hopper.
Part #: US-7000 -
Packaging Products Ultra-Scale Semi-Automatic "Flip" Net-Weigh/Counting Scale (US-5000)
- A digital averaging program combined with 16,000,000 internal counts delivers high accuracy and stability.
- Variable sampling, automatic zeroing, keyboard calibration and multiple modes are all standard scale controller features.
- A large stainless steel table with side walls is provided to store or sort products for loading.
- All contact surfaces are stainless steel (optional wash down retrofit package available.)
- Count readout up to 50,000 pieces or weight readout in pounds, kilograms or grams.
Part #: US-5000 -
Packaging Products Automatic Table Top Poly Bag Sealer (T-375)
- Four color screen with pop-up windows
- Diagnostic and troubleshooting screens
- Preset and totalizing bag counter
- Automatic “paced” operation with fill time delay timer
- Universal, adjustable parts chute
Part #: T-375 -
Packaging Products Automatic Table Top Bag Sealer (T-300)
- Seal Mechanism: 1/8" Solid Heater Bar
- Cycle Operation: Automatic Paced
- Bag Size Range: 2" x 2" up to 11" x 16"
- Guard-Switch Feature: Standard
- Product Pass-Through: 2-3/4" (Can be Increased)
Part #: T-300 -
Packaging Products Automatic Roll Bag Sealer (T-275)
- Solid, constant heat seal bar with temperature adjusted through and easy to use temperature controller.
- Patented Teflon Shield increases Teflon life tenfold. Because the Teflon only contacts the heater bar while sealing, the Teflon remains clean with less opportunity to burn.
- "Guard Switch" Operation - Cycles the machine at the loading area to minimize operator movements, decrease operator fatigue and increase output.
- Patented anti-jamming method detects seal obstructions and reverses seal bar.
- Universal adjustable funnel included.
Part #: T-275 -
Packaging Products Manual Table Top Bag Sealer (T-200)
- Heat/dwell & cool LED's indicate cycle operation of sealing mechanism.
- Patented Teflon ShieldTM increases Teflon life by 10 times, because the Teflon is only in contact with the heating element while sealing, the element stays clean and delivers a long service life.
- Tilting guard (Guard-switch) assembly cycle machine at the loading area, maximizing output and minimizing operator fatigue.
- Patented anti-jamming method ensures no attempts are made to seal obstructions in the seal area, especially fingers!
- Universal funnel attachment is standard allowing the operator to slide product directly into the bag.
Part #: T-200 -
Double Reverse 1/12th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT11012DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT11012DR3HP -
Double Reverse 1/11th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT11011DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT11011DR3HP -
Double Reverse 1/10th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT11010DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT11010DR3HP -
Double Reverse 1/9th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT1109DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT1109DR3HP -
Double Reverse 1/8th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT1108DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT1108DR3HP -
Double Reverse 1/7th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT1107DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT1107DR3HP -
Double Reverse 1/6th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT1106DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT1106DR3HP -
Double Reverse 1/5th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT1105DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT1105DR3HP -
Double Reverse 1/4th Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT1104DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT1104DR3HP -
Double Reverse 1/3rd Cut 110lb Mylar Coated Copier Tabs 3 Hole (XT1103DR3HP)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT1103DR3HP -
Double Reverse 1/12th Cut 110lb Mylar Coated Copier Tabs (XT11012DR)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT11012DR -
Double Reverse 1/11th Cut 110lb Mylar Coated Copier Tabs (XT11011DR)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT11011DR -
Double Reverse 1/10th Cut 110lb Mylar Coated Copier Tabs (XT11010DR)
- Tab Size: 8.5" x 11" Body with 1/2" Tab Extension
- Paper Weight: 110lb Index
- Brightness: 92 Bright
- Collation : Double Reverse Collated
- Tab Cut: 1/3rd Cut (3 tabs on 11 inch edge) to 1/10th Cut (10 tabs on 11 inch edge)
Part #: XT11010DR
