Product listing: ChamPADco 14" Padding Press with Base and Pressure clamp (CPC14) to SpeedPress 6' x 10' Rhino Self-Healing Large Cutting Mat With Grid Underlay (SP-CM157G)
-
ChamPADco 14" Padding Press with Base and Pressure clamp (CPC14)
- Affordable and rugged padding machine.
- Easy to use.
- Holds sheets up to 14 inches on the padded side.
- Compact size that occupies minimal space.
- Suitable for high production.
Part #: CPC14 -
ChamPADco 11" Padding Press with Base and Pressure clamp (CPC11)
- Affordable and rugged padding machine.
- Easy to use.
- Holds sheets up to 11 inches on the padded side.
- Compact size that occupies minimal space.
- Suitable for high production.
Part #: CPC11 -
Rosback Rosco 371 Three-Spindle Paper Drill (ROSBK371)
- Three hole paper drill that easily converts to single-hole drilling if needed.
- Maximum drilling capacity: 2"stock.
- Easy to use hand lever.
- Heavy-duty build.
- Sealed bearings.
Part #: ROSBK371 -
Rosback Rosco 370 Three-Spindle Paper Drill (ROSBK370)
- 2"stock drilling capacity.
- 12 drill diameters available, starting from 1/8"and up to 1/2".
- Comfortable and easy to use lever.
- Rugged build.
- Sealed bearings.
Part #: ROSBK370 -
Standard 17.7" Programmable Electric Paper Cutter (APC-450)
- Control Panel:
- Job recall function. Frequent jobs, for example A3 cut to A4 can be recalled with the push of a button. Three “Quick Call” buttons are available to program frequent jobs.
- Programming function. Repeat jobs can be conveniently saved to memory. The capacity of job memory is 30 courses and 99 steps (total 300 points).
- Operator Safety:
- Standard Equipped Area Sensors. If the area sensors detect any objects, the cutting motion will stop immediately. These sensors meet the high level of safety in Category 4 according to ISO13849-1.
Part #: APC-450 -
Standard 25" Electric Paper Cutter (PC-640)
- Accurate Cutting - The backgauge enables you to adjust the cutting length accurately within 0.5mm / 0.019" by turning the positioning handle. The backgauge can be locked when you repeat the same cutting position.
- Cut Line - The LED cutting line shows the actual cutting position to allow easy and accurate positioning and operation.
- Safety - The PC-640 employs updated safety standards. Two button operation, safety cover, and emergency stop features for operator safety. Simple and safe operation suitable for office use.
- Easy Operation - Clamp the stock by turning the pressure handle by hand, and press the two cutting buttons.
- Double Safety Circuit -The system is further equipped with a hard-wired secondary safety interrupt for operator safety.
Part #: PC-640 -
Standard 24" Programmable Hydraulic Paper Cutter (APC-610)
- Hydraulic clamping and cutting mechanism ensures powerful and accurate cutting quality.
- The servo-motor driven backgauge assures accurate positioning and repeatability for consistent quality production.
- The color touchscreen is intuitive and icon-based for user-friendly operation. Operation, setting and information screens are used for efficient and accurate operation.
- The Simple Program Setting screen displays sheet rotating direction and cutting order graphically.
- The APC-610 is activated only when the two cut buttons are simultaneously pressed for operator safety.
Part #: APC-610 -
SpeedPress Rhino Self-Healing Large Cutting Mat With Grid Underlay (SP-CM-G)
- Thick, durable, long-lasting 180-gauge (3/16") polyethylene plastic.
- With grid underlay.
- Suitable for both rotary cutters and straight utility knives.
- Translucent; non-glare matte surface.
- Large seamless mats for straight cutting.
Part #: SP-CM-G -
SpeedPress Rhino Self-Healing Large Cutting Mat (No Grid) (SP-CM)
- Thick, durable, long-lasting 180-gauge (3/16") polyethylene plastic.
- Without grid underlay.
- Suitable for both rotary cutters and straight utility knives.
- Translucent; non-glare matte surface.
- Large seamless mats for straight cutting.
Part #: SP-CM -
SpeedPress Rhino Work Table with 3/4" MDF Top/Cutting Mat/Roll Holder/Shelf (SP-RT-TP)
- Rhino Work Table Features:
- Welded All Steel Frame
- Adjustable Leg Height
- Rugged Table Holds up to 1500 Pounds
- 3/4" Seamless MDF Table Top
Part #: SP-RT-TP -
SpeedPress Rhino Work Table with 3/4" Birch Top and Cutting Mat (SP-RT)
- Rhino Work Table Features:
- Welded All Steel Frame
- Adjustable Leg Height
- Rugged Table Holds up to 1500 Pounds
- 3/4" Seamless Birch Table Top
Part #: SP-RT -
Fellowes Refurbished Powershred 225Ci Cross Cut Paper Shredder - 3825001 (3944701)
- Auto Start/Stop: Yes - Electronic
- Run Time: Continuous
- Color: Black/Dark Silver
- Casters: Yes
- Basket Capacity (gallons): 16
Part #: 3944701 -
Fellowes Refurbished Powershred 60Cs Cross-Cut Paper Shredder - 4606001 (3940001)
- Sheet Capacity (20 lb. paper): 10
- Cut Type: Cross-Cut
- Cut Size: 5/32" x 2"
- Security Level: P-3
- Speed (FPM): 14
Part #: 3940001 -
Fellowes Refurbished Powershred 99Ci Level P-4 Cross-Cut Paper Shredder - 3229901 (3941801)
- 100% Jam Proof System eliminates paper jams and powers through tough jobs.
- SafeSense Technology stops shredder when hands touch the paper opening.
- SilentShred offers ultra-quiet shredder performance for shared workspaces.
- Energy Savings System provides optimal energy efficiency 100% of the time-in use and out of use.
- Shreds 18 sheets per pass into 5/32” x 1-1/2” cross-cut particles (Security Level P-4).
Part #: 3941801 -
SpeedPress 35.8" x 71.7" Magic Self-Healing Cutting Mat (SP-CM3x6)
- 5-ply cutting mat is approx. 3mm (.12") thick.
- Easy to clean and maintain.
- Rounded corners.
- Grid with distinctive yellow 1" squares; 1/4" ruler around outside edges.
- Includes 45-degree angles.
Part #: SP-CM3x6 -
SpeedPress 35.8" x 47.6" Magic Self-Healing Cutting Mat (SP-CM3x4)
- 5-ply cutting mat is approx. 3mm (.12") thick.
- Easy to clean and maintain.
- Rounded corners.
- Grid with distinctive yellow 1" squares; 1/4" ruler around outside edges.
- Includes 45-degree angles.
Part #: SP-CM3x4 -
SpeedPress 23.6" x 35.4" Magic Self-Healing Cutting Mat (SP-CM2x3)
- 5-ply cutting mat is approx. 3mm (.12") thick.
- Easy to clean and maintain.
- Rounded corners.
- Grid with distinctive yellow 1" squares; 1/4" ruler around outside edges.
- Includes 45-degree angles.
Part #: SP-CM2x3 -
SpeedPress 17.7" x 23.6" Magic Self-Healing Cutting Mat (SP-CM1p5x2)
- 5-ply cutting mat is approx. 3mm (.12") thick.
- Easy to clean and maintain.
- Rounded corners.
- Grid with distinctive yellow 1" squares; 1/4" ruler around outside edges.
- Includes 45-degree angles.
Part #: SP-CM1p5x2 -
SpeedPress 11.8" x 17.7" Magic Self-Healing Cutting Mat (SP-CM1x1p5ww)
- 5-ply cutting mat is approx. 3mm (.12") thick.
- Easy to clean and maintain.
- Rounded corners.
- Grid with distinctive yellow 1" squares; 1/4" ruler around outside edges.
- Includes 45-degree angles.
Part #: SP-CM1x1p5ww -
Spiral Mini Bubble Pack Film Roll for Accel Air 1 and Air 3 Packaging Machine (1035pcs/roll) - 2 Rolls (05ACCELAMINI)
- For use with Accel Air 1 and Air 3 Packaging Machines. Also compatible with older WiAir models
- Create protective packaging on demand.
- Saves valuable warehouse space, fully portable.
- Make Cushion Size and Shape required on demand.
- Sleep Mode after 2 hours of non-use.
Part #: 05ACCELAMINI -
Spiral Bubble Pack Film Roll for Accel Air 1 and Air 3 Packaging Machines (1035pcs/roll) - 2 Rolls (05ACCELABUB)
- For use with Accel Air 1 and Air 3 Packaging Machines. Also compatible with older WiAir models
- Create protective packaging on demand.
- Saves valuable warehouse space, fully portable.
- Make Cushion Size and Shape required on demand.
- Sleep Mode after 2 hours of non-use.
Part #: 05ACCELABUB -
Spiral Single Air Pillow Film Roll for Accel Air 1 and Air 3 Packaging Machines (2700pcs/roll) - 4 Rolls (05ACCELAPIL)
- For use with Accel Air 1 and Air 3 Packaging Machines. Also compatible with older WiAir models
- Designed for void fill applications.
- Manufactured from High Density Polyethylene (HDPE).
- Film is extremely strong, impact and abrasion resistant.
- Ecologically friendly and is recyclable.
Part #: 05ACCELAPIL -
Spiral Accel Air 1 Air Pillow / Bubble Wrap Packaging Machine (04ACCELAIR1)
- Allows you to make air cushions and bubble wraps on demand to meet all your shipping needs without having to store bulky packing materials.
- Fast and Easy-to-Use
- Special Tension Roller design to back up smooth film running.
- Compact, can be moved to location needed. Saves valuable warehouse space, fully portable
- Make Cushion Size and Shape required on demand.
Part #: 04ACCELAIR1 -
Spiral Accel Air 3 Air Pillow / Bubble Wrap Packaging Machine (04ACCELAIR3)
- Innovative packaging machine
- Create your own air cushions and bubble wrap
- Max speed of 26'per minute, or 10 m per min
- Tension roller for smooth film running
- Compact and easy to move when and as needed
Part #: 04ACCELAIR3 -
Part #: DESIGNERFEE
-
Graphtec Plus 50" Vinyl Cutter and Plotter with Stand (CE7000-130)
- ARMS (Advanced Registration Mark Sensing system) functions are improved to version 8.0.
- "Data link function", Barcode reader / Continuous cutting will improve productivity of cutting operation.
- New function "1 Point Alignment" reduces the cutting operation time.
- Graphtec original software Cutting Master 4 has been updated to support Adobe Illustrator trim marks.
- Carrier sheet table which will helps stable die-cutting with carrier sheet is available for CE700-40 and 60.
Part #: CE7000-130 -
Graphtec Plus 24" Vinyl Cutter and Plotter with Stand (CE7000-60)
- ARMS (Advanced Registration Mark Sensing system) functions are improved to version 8.0.
- "Data link function", Barcode reader / Continuous cutting will improve productivity of cutting operation.
- New function "1 Point Alignment" reduces the cutting operation time.
- Graphtec original software Cutting Master 4 has been updated to support Adobe Illustrator trim marks.
- Carrier sheet table which will helps stable die-cutting with carrier sheet is available for CE700-40 and 60.
Part #: CE7000-60 -
Graphtec 15" Desktop Vinyl Cutter and Plotter (CE7000-40)
- Ease of use with great media tracking on long runs.
- ARMS8.0 helps improve the productivity of print and cut.
- Improved workflow with offline output using USB memory and data management function using Barcode.
- Useful standard or optional software helps improve the efficiency of cutting operation.
- 4 sizes are available depending on the application.
Part #: CE7000-40 -
SpeedPress 6' x 12' Rhino Self-Healing Large Cutting Mat With Grid Underlay (SP-CM158G)
- Thick, durable, long-lasting 180-gauge (3/16") polyethylene plastic.
- With grid underlay.
- Suitable for both rotary cutters and straight utility knives.
- Translucent; non-glare matte surface.
- Large seamless mats for straight cutting.
Part #: SP-CM158G -
SpeedPress 6' x 10' Rhino Self-Healing Large Cutting Mat With Grid Underlay (SP-CM157G)
- Thick, durable, long-lasting 180-gauge (3/16") polyethylene plastic.
- With grid underlay.
- Suitable for both rotary cutters and straight utility knives.
- Translucent; non-glare matte surface.
- Large seamless mats for straight cutting.
Part #: SP-CM157G
