Product listing: Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (DTJM18) to Cardinal Black ShowFile SpineVue 12 Pocket Presentation Book 12pk - CB - Sheet Protectors (CRD-51132)

Page
View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (DTJM18)


      Max Laminating Width: 18.25 inches (464mm)
      Width: 25.5 inches (648mm)
      Depth: 11.75 inches (299mm)
      Height: 13 inches (330mm)
      Weight: 51 lbs (23 kg)
      Roller Diameter: 2.5 inches (63.5mm)
      Max Nip Opening: 0.75 inches (19mm)
      Warranty: 1 Year Manufacturer Warranty
      Power: 115 VAC 50/60 Hz 50w
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Max Laminate Width: 18.25"
      Laminating Thickness: 3/4"
      Hot or Cold: Cold ßÃЊ“Á
    Part #: DTJM18

    $780.95

  2. Drytac WindowTac 51" x 164' Pressure Sensitive Mounting Adhesive (PWD51164)

      Features:
      Clear, double-sided mounting adhesive with an embossed release liner
      Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
      Excellent clarity without bubbles or wrinkling
      Provides additional UV protection for graphics printed with dye-based or pigmented inks Benefits:
      Transforms any printed image into an easy-to-install window graphic or decal
      Graphics can be dry installed, cleanly removed and easily repositioned during installation
      Suitable for double-sided window graphics
      Ideal for face mounting of temporary graphics to glass, acrylic and other non-porous surfaces
      Ideal for short-term promotional window advertising and POP displays
      Clear, double-sided mounting adhesive with an embossed release liner
      Provides additional UV protection for graphics printed with dye-based or pigmented inks
      Excellent clarity without bubbles or wrinkling
      Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee ßÃЊ“Á
    Part #: PWD51164

    $512.30

  3. Drytac MHA 25.5" x 328' Multi Heat Activated Mounting Adhesive (MHA25328)


      Film Width: 25.5"
      Film Length: 328'
      Core Size: 3"
      Filmic Carrier: None
      Adhesive Bond: Permanent:
      Initial Tack: Very Low
      Application Speed: 1' - 8' (0.3m - 2.5m) per minute
      Adhesive Base: Solvent acrylic heat-activated
      App. Temperature: 185 F - 220 F
      Release Liner: Moisture Stable Paper (100 gsm)
      Film Finish: Mounting Adhesive
      Core Size: 3"
      Adhesive Bond: Permanent:
      Hot or Cold: Hot ßÃЊ“Á
    Part #: MHA25328

    $357.52

  4. Drytac MHA 41" x 328' Multi Heat Activated Mounting Adhesive (MHA41328)


      Film Width: 41"
      Film Length: 328'
      Core Size: 3"
      Filmic Carrier: None
      Adhesive Bond: Permanent:
      Initial Tack: Very Low
      Application Speed: 1' - 8' (0.3m - 2.5m) per minute
      Adhesive Base: Solvent acrylic heat-activated
      App. Temperature: 185 F - 220 F
      Release Liner: Moisture Stable Paper (100 gsm)
      Film Finish: Mounting Adhesive
      Core Size: 3"
      Adhesive Bond: Permanent:
      Hot or Cold: Hot ßÃЊ“Á
    Part #: MHA41328

    $562.34

  5. Drytac Protac High Gloss UV 5.0mil 38" x 150' PS Overlaminate - Pressure Sensitive (PLHG3385)


      Film Width: 38"
      Film Length: 150'
      Film Thickness: 5.0mil
      Core Size: 3"
      Finish: Gloss
      Base Film: 4 mil (100 micron) Polyester
      Adhesive: 1.0mil solvent acrylic
      Initial Tack: High
      Application Speed: 1' - 6' per minute
      Application Temperature: Room Temperature - 120 F
      Release Liner: Clear Polyester Film
      Film Finish: Gloss
      Core Size: 3"
      Film Thickness: 5.0mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PLHG3385

    $470.20

  6. Drytac Protac High Gloss UV 5.0mil 51" x 150' PS Overlaminate - Pressure Sensitive (PLHG3515)


      Film Width: 51"
      Film Length: 150'
      Film Thickness: 5.0mil
      Core Size: 3"
      Finish: Gloss
      Base Film: 4 mil (100 micron) Polyester
      Adhesive: 1.0mil solvent acrylic
      Initial Tack: High
      Application Speed: 1' - 6' per minute
      Application Temperature: Room Temperature - 120 F
      Release Liner: Clear Polyester Film
      Film Finish: Gloss
      Core Size: 3"
      Film Thickness: 5.0mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PLHG3515

    $620.55

  7. Drytac Protac Polycarbonate UV 10.0mil 51" x 75' PS Overlaminate - Pressure Sensitive (PPC51075-10)


      Film Width: 51"
      Film Length: 75'
      Film Thickness: 10.0mil
      Core Size: 3"
      Finish: Polycarbonate (Pebble Textured Velvet Matte)
      Base Film: 10.0 mil (250 micron) polycarbonate
      Adhesive: 2.0 mil solvent acrylic
      Initial Tack: High
      Application Speed: 1' - 4' per minute
      Application Temperature: Room Temperature - 90 F
      Release Liner: Clear Polyester
      Film Finish: Matte
      Core Size: 3"
      Film Thickness: 10.0mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PPC51075-10

    $600.54

  8. Drytac MediaShield Heatset Satinex UV 3mil 38" x 164' Overlaminate (SX38164)

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX38164

    $346.05

  9. Drytac MediaShield Heatset Satinex UV 3mil 51" x 328' Overlaminate (SX51328)

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX51328

    $662.38

  10. Drytac MediaShield Heatset Emerytex UV 5mil 51" x 328' Overlaminate (ET51328)

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: ET51328

    $875.70

  11. Drytac MHL Gloss 3mil 38" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD38503)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD38503

    $151.02

  12. Drytac MHL Gloss 3mil 51" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD51503)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD51503

    $308.07

  13. Drytac MHL Gloss 5mil 25" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD25205)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD25205

    $146.83

  14. Drytac MHL Matt UV 3mil 61" x 500' Low Temp Thermal Laminating Film - Low Melt (MM61503)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MM61503

    $472.60

  15. Drytac MHL Impervo UV 5mil 38" x 250' Hardcoat Laminating Film - UV Protected (MLL38205)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MLL38205

    $637.46

  16. Drytac Ferro Metal Paper 36" x 82' Magnet Receptive Material (DFE3682)


      Base Product: 2.0mil (50micron) steel
      Adhesive: None
      Coating: 4.0mil (100 micron) white paper on each side
      Initial Tack: None
      Release Liner: None
      Film Finish: Magnetic Sheet
      Core Size: 3"
      Thickness: 4 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: DFE3682

    $734.93

  17. Akiles VersaMac 4:1 Spiral Coil Binding Round Hole Die Set - Modular Punch Diesets (AVMD41)


      Binding Style: Spiral Coil
      Pitch: 4:1 (4 Holes Per Inch)
      Hole Shape: Round
      Part Number: AVM-D41
      Has patented quick change die system
      Heavy duty design for commercial punching
      55 sheet punch capacity
      11" punch length ßÃЊ“Á
    Part #: AVMD41

    $830.00

  18. Akiles Versamac 3 Hole Punch Die Set - Modular Punch Diesets (AVMD3H)


      Binding Style: 3 Hole Punch
      Pitch: n/a
      Hole Shape: Round
      Part Number: AVM-D3H
      Has patented quick change die system
      Heavy duty design for commercial punching
      55 sheet punch capacity
      11" punch length ßÃЊ“Á
    Part #: AVMD3H

    $830.00

  19. Akiles Versamac 6mm Spiral Coil Binding Oval Hole Die Set - Modular Punch Diesets (AVM-D6)


      Binding Style: Spiral Coil
      Pitch: 6mm
      Hole Shape: Oval
      Part Number: AVM-D6
      Heavy duty design for commercial punching
      Has patented quick change die system
      55 sheet punch capacity
      11" punch length ßÃЊ“Á
    Part #: AVM-D6

    $940.00

  20. Akiles Versamac 3:1 Wire Binding Round Hole Die Set - Modular Punch Diesets (AVM-D31R)


      Binding Style: Double Loop Wire
      Pitch: 3:1 (3 Holes Per Inch)
      Hole Shape: Round
      Part Number: AVM-D31R
      Has patented quick change die system
      Heavy duty design for commercial punching
      55 sheet punch capacity
      11" punch length ßÃЊ“Á
    Part #: AVM-D31R

    $940.00

  21. Akiles Versamac 2:1 Wire Binding Round Hole Die Set - Modular Punch Diesets (AVM-D21R)


      Binding Style: Double Loop Wire
      Pitch: 2:1 (2 Holes Per Inch)
      Hole Shape: Round
      Part Number: AVM-D21R
      Heavy duty design for commercial punching
      Has patented quick change die system
      55 sheet punch capacity
      11" punch length ßÃЊ“Á
    Part #: AVM-D21R

    $940.00

  22. Royal Sovereign RSC-1651LS and RSC-1651LSH 65 Inch Rear Wind Up Assembly - Laminating Accessories (RSWU-1650A)

      Product Type: Front Feed Assembly Size: 65inch Warranty: 1Year Manufacturer Product Number: RSWU-1650A
    Part #: RSWU-1650A

    $450.47

  23. Royal Sovereign RSH-1651 65 Inch Rear Wind Up Assembly - Laminating Accessories (RSWU-1650B)

      Product Type: Front Feed Assembly Size: 65inch Warranty: 1Year Manufacturer Product Number: RSWU-1650B
    Part #: RSWU-1650B

    $450.47

  24. Green 3/4" 2:1 Pitch Twin Loop Wire - 100pk (W340GN)


      Color: Green
      Pitch: 2:1 (21 loops)
      Size: 3/4"
      Capacity: Approx. 140-160 sheets (20lb bond)
      Quantity: 100 Per Box
      Part Number: W340GN
      Capacity: Approx. 140-160 sheets (20lb bond)
      Quantity: 100 pk
      Hole Pattern: 21 Hole
      Length: 11" ßÃЊ“Á
    Part #: W340GN

    $76.66

  25. Navy Blue Linen A3 Size Binding Covers - 100pk - Grain (MYLCA3NV)

      Cover Type: Linen Weave Paper Cover Thickness: 80lb Cover Cover Size: 297mmx420mm A3 Size Color: Navy Corners: Square Quantity: 100 pieces Windows: No Part Number: MYLCA3NV
    Part #: MYLCA3NV

    $101.69

  26. 1.5 Mil Standard Roll Laminating Film 25" x 1000' 2.25" Core - Standard Melt (DL25100-2)

      Film Type: Standard Film Thickness: 1.5Mil Roll Width: 25inch Roll Length: 1000feet Film Finish: Gloss Core Size: 2.25inch Operating Temperature: 280 Degrees Fahrenheit Part Number: DL25100-2 Part Number: 3122095, G3122095 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***
    Part #: DL25100-2

    $92.99

  27. Fujipla 25" Easy-To-Use School Laminator - DryLam (DL-LPE6510)


      Laminates up to 25" wide.
      Rollers can be gapped to eliminate flat spots
      Protective shield
      Fast, 5 minute warm up time
      Adjustable temperature with large dial
      Uses all standard school films, including GBC NAP LAM I
      Laminates 1.5 to 3.0 mil films
      Photo quality
      One year manufacturer warranty.
      Add an additional 1 year On-Site EMA (Equipment Maintenance Agreement) available.
      Max Laminate Width: 25"
      Laminating Speed: 3' per Minute
      Max Film Thickness: 3 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: DL-LPE6510

    $1433.70

  28. Drylam School-Lam 27" School Laminator (DL-SL27)


      Laminates up to 27" wide.
      Fixed speed at 5' per minute
      Uses School Grade Laminating Films , 1.5 mil and 3.0 mil
      Hand held slitter with convenient storage on the machine
      Adjustable Feedguide for precision lamination
      Incorporated safety sheild
      Keyswitch to prevent unauthorized use of machine
      Stop/Reverse function
      Adjustable temperature control
      Warranty: 1 Year Manufacturer Warranty
      Fixed speed at 5' per minute
      Laminating Speed: 5' per Minute
      Max Film Thickness: 3 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: DL-SL27

    $1770.36

  29. Drylam 12" Clear Tech Pouch Laminator (DL-L1200)

      Laminate documents with film up to 10mil thick as well as mounts prints to boards up to a 1/4inch thick Attractive and durable plastic housing One button operation Professional 4 roll design Made in the USA UL/CSA Warranty: 1Year Manufacturer Warranty
    Part #: DL-L1200

    $214.50

  30. Cardinal Black ShowFile SpineVue 12 Pocket Presentation Book 12pk - CB - Sheet Protectors (CRD-51132)

      Binder Type: Presentation Book Color(s): Black Quantity: 12 per Box Sheet Size (W x H): 8 1/2 in x 11 in Post-Consumer Recycled Content Percent : 0% Total Recycled Content Percent : 0% Capacity Range [Max]: 24Sheets Material(s): Polypropylene Binder Special Features: Bound Pages, Non-Transfer Material Part Number: CRD-51132
    Part #: CRD-51132

    $74.95

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   70   80