Product listing: Tec Lighting MegaCoat XL 63" Wide Format UV Coater (MC6063-2) to Destroyit MBM 4605 High Capacity Cross Cut Paper Shredder - DSH0269 (MB-4605CC)

Page
View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. Tec Lighting MegaCoat XL 63" Wide Format UV Coater (MC6063-2)

    • Precise coating up to 63" wide
    • Process speed to 70 fpm.
    • UV process ready indicator.
    • Digital speed controls ensure repeatable performance.
    • Advanced curing unit design features parabolic reflector and short run out engineering.
    Part #: MC6063-2

    $73999.00

  2. Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)

    • Up to 24 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • Electronically-adjustable and programmable clamp pressure.
    • Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
    Part #: CH-370TC

    $44250.00

  3. HSM SP 5080 Level 3 Shredder Baler Combination (HSM-365520)

    • Optimized cutting device technology destroys 500-550 sheets of paper, creating 150 particles per page;
    • Compresses 4-9 bales per hour.
    • Also shreds staples, paper clips, credit/store cards, CDs/DVDs, floppy disks, and USB sticks.
    • Obliterates large quantities such as archives and bulk storage.
    • Material feed via electronic conveyor belt.
    Part #: HSM-365520

    $43909.75

  4. Packaging Products Ultra-Scale Automatic Net-Weigh Single/Dual Head Scale (US-7000)

    • All stainless steel contact surfaces.
    • Programmable bulk & dribble setting.
    • Three tray vibratory feed system.
    • Nema 4 enclosure, microprocessor based controls.
    • Standard 2 cubic foot supply hopper.
    Part #: US-7000

    $38885.00

  5. Graphic Whizard Wizard PT 335 SCC Multi Slitter/Cutter/Creaser (PT335SCC)

    • 4" deep pile feeder.
    • Multi accessory output.
    • 9" colour touchscreen.
    • Interchangeable crease/ perf dies.
    • Built in job creator.
    Part #: PT335SCC

    $33687.86

  6. Graphic Whizard Crease/Perf/Fold Machine (PT-335CKF)

    • Auto Sheet length measurement.
    • Automated, or Manual job set-up for custom jobs.
    • No limitations between creases/perfs.
    • Partial perforation capabilities in both directions.
    • 4" deep pile feeder.
    Part #: PT-335CKF

    $33174.36

  7. Royal Sovereign Rollover Classic 65" x 236" Flatbed Applicator for Mounting and Laminating (10617)

    • Key Features:
    • Ideal for rigid panel application and laminating digital prints.
    • Substrates up to 3.5 inches can be handled for perfectly flat applications without bubbles or creases.
    • Applying digital prints and other self-adhesive applications on rigid panels such as composite board, acrylic, aluminum etc., is just one of the areas where Rollover Classic reveals its excellent properties in results and operations.
    • Being able to comfortably operate the laminator with one hand while having free access to roller, media and tabletop, results in smooth and effective handling.
    Part #: 10617

    $31087.14

  8. Intimus HDD Gladiator Hard Drive Shredder (Gladiator-HDD)

    • Shreds HDD and SSD drives as well as various other form of media, like CDs, DVDs, Blu-Ray disk, VHS, DLT tapes, Cell Phones, etc.
    • Automatic reverse when overloading.
    • Split Shredding Chamber for Multi Media optimization.
    • High Performance shredder for optical and magnetic media.
    • Continuous manual material feed.
    Part #: Gladiator-HDD

    $30998.99

  9. Spiel Sterling Digipunch High Speed Automatic Punch (SPL-DP14)

    • Paper Stabber. The stabber can be set to stab 3 - 17 sheets. This is more consistent than punches that rely on gravity to feed the paper.
    • Die. The dies can be changed in seconds. Pull pins result in faster changeovers between sheet sizes.
    • Registration Table. This registers the paper on all four sides, using side guides and rear stops. The rear stops accommodate sheets intermixed with tabs.
    • Stacker. The receding stacker operates in tandem with the feeder, each of which can hold five reams of paper. The machine stops when the stacker is full.
    • Touch Screen. The Digipunch’s touch screen computer guides you through the entire punching process. You choose the paper size from a variety of presets or enter a custom size. Choose how many sheets you want to punch per lift, punching less for problem stocks. The computer will track the maintenance cycle of each die that is used, prompting when to lubricate or sharpen the die. It also prompts the operator when safety covers are open. The manual is contained in the touch screen computer with a variety of tips and tricks to make the operation of the machine quick and easy.
    Part #: SPL-DP14

    $29950.00

  10. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X

    $28995.00

  11. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494

    $26199.00

  12. Tec Lighting TruCoat 16" Auto Feed UV Coater (TRUVF-16D)

    • Apply gloss-satin and matte coatings.
    • Coat toner based, offset or inkjet with ease.
    • Quick change textured rollers for an array of finishes.
    • Speeds of up o 4,000SPH.
    • From start to coating in less than 5 Minutes.
    Part #: TRUVF-16D

    $26144.00

  13. GBC DigiCoil Automatic Color Coil Inserter (0340000000)

    • LCD panel directs operator through each step of the binding process.
    • Accommodates 4:1 coils from 8mm to 33mm.
    • Secure coil crimping.
    • Small footprint - takes less space.
    • No air required.
    Part #: 0340000000

    $25598.00

  14. Tec Lighting TruCoat 30" Hand-Fed UV Coater (TRUV-30A)

    • Apply gloss-satin and matte coatings.
    • Coat toner based, offset or inkjet with ease.
    • Quick change textured rollers for an array of finishes.
    • Speeds of up o 2,000SPH.
    • From start to coating in less than 5 Minutes.
    Part #: TRUV-30A

    $22935.00

  15. Formax Cut-True 31H 28" Hydraulic Guillotine Cutter (Cut-True31H)

    • Standard Features:
    • Heavy Duty Construction: Designed for true two-shift operation.
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier.
    • Low-Friction Air-Assist Ball Deck: Makes it easy for operators to move and position heavy paper stacks.
    • High-Speed Hardened Steel Blade: Designed for accurate cuts and long life.
    Part #: Cut-True31H

    $22676.00

  16. MBM Triumph 5560 LT 21-5/8" Programmable Hydraulic Paper Cutter with Air Tables and VRCut Software (CU0497)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0497

    $21999.00

  17. Formax 6306 Series Fully Automatic Folder and Inserter (FD6306)

    • 7" Color Touchscreen Control Panel: Graphical interface provides quick, easy setup.
    • 50 Programmable Jobs: Handy for recurring or frequently processed applications.
    • High-Capacity Vertical Stacker: Holds up to 500 finished envelopes in a neat, sequential stack.
    • Fully Automatic Adjustments.
    • Envelope & Paper Presence Sensors: Graphic indicators on touchscreen assist operators.
    Part #: FD6306

    $21350.00

  18. Proton 104 Multimedia Shredder (PDS-104)

    • Allows compliance with recognized security standards and regulations, including NIST, HIPAA, FACTA, PCI DSS, GLBA, PIPEDA, IRS, GDPR, etc.
    • Can be used to deform hard drive platters to NSA standards per NSAEPL for Hard Drive Destroyers.
    • Hardened, solid-steel cutting rollers for performance and durability.
    • Energy efficient; low-power energy savings mode after five (5) minutes of idle running.
    • Specific function modes for various types of materials and throughput.
    Part #: PDS-104

    $20495.00

  19. Challenge Titan 230 23" Hydraulic Programmable Paper Cutter (TITAN230PC)

    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    • Optional electronic clamp pressure adjustment.
    Part #: TITAN230PC

    $18295.00

  20. US Paper Counters Intelecount Sheet Counter and Batch Tabber (CW-IC)

    • Applications:
    • Fast, accurate counting
    • Fast, accurate tabbing
    • Quantity verification
    • Security verification
    Part #: CW-IC

    $18000.00

  21. James Burn DocuPunch MINI Desktop Automatic Punch (04JBDOCUMINI)

    • Speeds of up to 10,800 sheets per hour with clean, perfect holes for finishing.
    • Pick thickness of 0.4 mm will maximize production and offer trouble free operation on a wide range of paper stocks.
    • Touch pad control that is icon based for simple operation.
    • Punches a wide variety of paper stocks, covers, and even tabbed sheets in sizes from 5.5" x 5.5" up to 11.8" x 11.8" kept in perfect pre-collated order.
    • Duty rating of up to 400,000 sheets per month.
    Part #: 04JBDOCUMINI

    $17999.00

  22. US Paper Counters Count-Wise M High Volume Paper Counter and Batch Tabber (CWM)

    • Applications:
    • Exact count deliveries.
    • Maximize efficiency.
    • Control quantity at every stage.
    • Fast, accurate tabbing.
    Part #: CWM

    $16749.00

  23. MBM Triumph 5260 20-3/8" Automatic Programmable Cutter with VRCut Software (CU0489)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0489

    $15366.00

  24. Formax 20.5" Hydraulic Programmable Guillotine Cutter (Cut-True 29H)

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut
    Part #: Cut-True 29H

    $15026.00

  25. Paitec MX13000 High-Volume Desktop Pressure Sealer and Folder (Formely MX8000) (PMX13000)

    • Adjustable Speed. Adjustable speed allows operator to work at a comfortable speed and quiet environment.
    • Heavy Duty Cycle. Enhanced parts an life cycle on rollers allow MX13000 to operate up to 400,000 sheets per month.
    • Reverse (RFR) Friction Roller. Unique RFR system, automatically detects, singulates, and corrects doubles without any operator intervention for increased productivity.
    • Four-roller Sealing Unit. A second pair of sealing rollers enables enhanced sealing quality at higher speed.
    • Large Infeed Capacity. The easy-to-load, auto-lift infeed hopper holds up to 1,400 sheets for time saving throughout processing.
    Part #: PMX13000

    $13294.00

  26. Count Friction-Fed Digital Creasing/Perforating/Numbering Machine (FC114)

    • Simple programming allows you to number, perforate or crease individually.
    • Creasing:
    • Rotary-actuated impact creasing.
    • Two-sided creasing die - one side has a narrow crease and the other a wide crease for heavier stock to change, simply remove the die and flip it over.
    • Automated Distance Recognition - allows auto setups for your most common creases and corresponding folds.
    Part #: FC114

    $13015.00

  27. Morgana FSN Suction Feed Rotary Numbering Machine (65031)

    • Precision-feeding and sheet control.
    • Up to 8 parallel or convex heads.
    • Full safety enclosures and interlocks.
    • High power vacuum and air pump.
    • Fast, simple make-ready.
    Part #: 65031

    $12990.00

  28. SEAL 54 Base 55" Wide Format Heat Assist Laminator (SEAL-54Base)

    • Heat assisted top roller for superb lamination performance.
    • 55" working width to handle a wide range of media.
    • Maximum operating speed of 16.4’/minute.
    • 2" nip with manual adjustment suitable for working with a sled for road signs.
    • Enhanced take-up featuring auto-grip technology.
    Part #: SEAL-54Base

    $12456.20

  29. Challenge Spartan 185AEP 18.5' Electronic Programmable Cutter (CH-SPARTAN185AEP)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Electric Powered Backgauge: Controlled by the electronic console with handwheel for micro adjustments
    • 3" Lighted LCD Display: Displays backguague location with +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Programmable: Operator friendly software uses soft key menu prompts for easy programming. During a program the 3" LCD displays up to 5 consecutive cuts to aid the operator in navigating a job.
    Part #: CH-SPARTAN185AEP

    $11495.00

  30. Destroyit MBM 4605 High Capacity Cross Cut Paper Shredder - DSH0269 (MB-4605CC)

    • Fully enclosed, dust-proof gearbox housing
    • Cabinet door opens from front
    • Mobile shred bin for easy repacment of disposable shred bags.
    • 61gallon bin capacity
    • Automatic stop when hopper or cabinet door is opened or when shred bag is full
    Part #: MB-4605CC

    $11439.00

Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80