Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573

Product listing: Keencut Javelin Integra 64" Wide-Format Cutter Bar - Foster (60286)   to   Fletcher-Terry Gemini Pro 100" Rail Cutter - Board Trimmers (GeminiPro100)

  1. Keencut Javelin Integra 64" Wide-Format Cutter Bar - Foster

    Part number: 60286

    • Standard twist lifts provide a simple and convenient lift and hold solution. Unique Extrusion design for unparalleled cutting accuracy. Quick fit thread cap for easy accessory attachment. Blade locking thumb screw for safety and convenience. Rotating knob for ultra-fine blade depth adjustment. Two full length silicone grip cords to protect and easily clamp your materials. High-grade polymer bearing system for lasting accuracy. Accurate to within 0.008inch for extreme cutting. Includes 10 Graphik Blades. Includes Integral base with a lift and hold mechanism 5Year general warranty on all parts (except blades). 20Year warranty on cutting bearings. Optional Textile Cutting Wheel for cutting fabric, thin film, and textiles. Works perfectly with the Big Bench or independent Surface Mounted Lift & Hold bracket.

    List Price: $1,155.00

    Your Price: $1,039.50

    You Save: 10%

  2. Drytac MHL Impervo UV 10mil 38" x 250' Hardcoat Laminating Film - UV Protected

    Part number: MLL38210

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $1,464.06

    Your Price: $1,045.29

    You Save: 28%

  3. Akiles CoilMac ECP Heavy Duty Electric Coil Punch Machine - Coil Binding

    Part number: CoilMac-ECP41

    • 5 Disengageable Punch Pins: Specially designed disengageable positions guarantee a clean punch with most standard paper sizes.
    • Side Margin Control: Provides and evenly centered punch for all document sizes.
    • Depth Margin Control: 4 settings provide the perfect punch margin depth for different coil sizes.
    • Punching & Inserting Switch.

    List Price: $1,999.00

    Your Price: $1,038.00

    You Save: 48%

  4. 1.3mil Matte Nylon Lay Flat Laminating Film - 27.5" x 3000'

    Part number: CBDLF132753000M-3

    • Film Type: Nylon Lay Flat Laminating Film Thickness: 1.3Mil Roll Width: 27.5inch Roll Length: 3000feet Film Finish: Matte Core Size: 3inch Part Number: CBDLF132753000M-3

    Your Price: $1,019.59

  5. Polar Prism Saber 107EL 112EL 115 115CE 115EL HSS Blade - Replacement Blades

    Part number: JH-44750HSS

    • Compatible Models: Polar, Prism, Saber 107 EL, 112 EL, 115, 115 CE, 115 EL Material: High Speed Steel Holes: 26 Length: 54.724inch With: 6.299inch Thickness: 0.541inch Notes: Part Number: JH-44750HSS , 44750HSS , KN44750HSS

    Your Price: $1,017.59

  6. 1.3mil Matte Nylon Digital Lay Flat Laminating Film - 18.5" x 3000'

    Part number: CBDLF131853000DM-3

    • Film Type: Nylon Digital Lay Flat Laminating Film Thickness: 1.3Mil Roll Width: 18.5inch Roll Length: 3000feet Film Finish: Matte Core Size: 3inch Part Number: CBDLF131853000DM-3

    Your Price: $1,007.29

  7. Akiles CombMac-24E Electric 14" Comb Binding Machine

    Part number: AKCOMBMAC

    • Comb Opener
    • Comb Opener Handle: (can be set on left side also)
    • Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance
    • Open Punching Throat: For punching of longer documents.

    List Price: $1,999.00

    Your Price: $1,007.06

    You Save: 49%

  8. Itoh 100 High Speed Steel Replacement Blade

    Part number: JH-38000HSS

    • Compatible Models: Itoh 100 Material: High Speed Steel Holes: 28 Length: 48.031inch With: 5.512inch Thickness: 0.5inch Notes: Part Number: JH-38000HSS , 38000HSS , KN38000HSS

    Your Price: $1,006.99

  9. GBC 1.5 Mil Clear NAP-LAM II 38" x 3000'

    Part number: 3125652

    • Film Type: GBC NapLam II Thickness: 1.7mil Roll Width: 38inch Roll Length: 3000feet Film Finish: Clear Core Size: 3inch GBC Part Number: 3125652 , G3125652 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

    List Price: $1,154.73

    Your Price: $1,003.99

    You Save: 13%

  10. 1.7mil Matte Low Melt Laminating Film - 36" x 3000'

    Part number: CBD17M363000-3

    • Film Type: Premium Low Melt Thickness: 1.7Mil Roll Width: 36inch Roll Length: 3000feet Film Finish: Matte / Satin Core Size: 3inch Operating Temperature: 220 Degrees Part Number: CBD17M363000-3 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

    Your Price: $998.69

  11. Plastikoil PBS Industrial Roller Inserter - Coil Binding

    Part number: PBS-IRI

    • Power Supply: 110 V Single phase (220 V/Single also available) CE Compliant Dimensions: 20inch W x 10inch D x 7inch H Weight: 15 lbs. Part Number: PBS-IRI

    Your Price: $997.29

  12. Powis Parker Fastback Stitcher - Fastback Binding

    Part number: PPSTITCHER

    • Dimensions: 19"W x 11"H x 17"D (48.3 cmW x 27.9 cmH x 43.2 cmD)
    • Supplies: 210 8.5mm EBS Staples
    • Book Thickness: 3-30 sheets, plus endleaves
    • Adjustable Impact Setting

    Your Price: $995.00

  13. Xyron 2500 25" Professional Cold Process Laminator - XM2500 - Roll Laminators

    Part number: XRN2500B

    • Designers can create posters, displays and mock-ups
    • Schools can create posters, banners and signs
    • Quickprinters can create drawings, banners and instant lamination

    List Price: $1,599.99

    Your Price: $994.00

    You Save: 37%

  14. Destroyit MBM 2503 Strip Cut Paper Shredder - DSH0300 - Security Level

    Part number: MB-2503SC

    • Quiet and powerful single phase motor (3/4 maximum horsepower)
    • Fully enclosed, dust proof gearbox housing
    • High quality wooden cabinet mounted on casters
    • Pull-out bag frame for disposable shred bags

    List Price: $1,679.00

    Your Price: $991.00

    You Save: 40%

  15. GBC Arctic Polycarbonate 38" x 150'

    Part number: 9300728

    • Film Type: GBC Arctic Polycarbonate Thickness: 5mil Roll Width: 38inch Roll Length: 150feet Film Finish: Non Reflective Core Size: 3inch GBC Part Number: 9300728 , G9300728

    List Price: $1,158.76

    Your Price: $989.69

    You Save: 14%

  16. Fellowes Orion E 500 Electric Comb Binding Machine

    Part number: 5643201

    • Application: Large Office Usage: Frequent Binding Type: Plastic Comb Manual or Electric Punching: Electric Binding Capacity: 500sheets Punching Capacity: 30sheets Ready Light/Binding Light: No Auto Shutoff: N/A Releasable Dies: Yes Adjustable Margin Depth: Yes Color: Gray Item H x W x D (inches): 9.75x15.75x19.75 Three-hole Punch: No Removable Binding System: No Part Number: 5643201 UPC Code: 043859620135 Suggested Price: $1,999.95 Warranty: 1Year Manufacturer Warranty

    List Price: $1,999.95

    Your Price: $988.20

    You Save: 50%

  17. Rhin-O-Tuff 4:1 .2475 Oval Hole Die Set For HD7700 - Modular Punch Diesets

    Part number: 79440

    • 4:1 .2475 Pitch Oval Hole Die
    • .2475 Hole Spacing
    • .188 x .157 Oval Hole Size
    • Rhin-O-Tuff Part Number: 079440

    Your Price: $980.00

  18. Fellowes Fortishred 2250C Cross-Cut Paper Shredder - Security Level

    Part number: 4616001

    • Sheet Capacity (20 lb. paper): 14
    • Cut Type: Cross-Cut
    • Cut Size: 5/32" x 1 9/16"
    • Security Level: P-4

    List Price: $2,099.00

    Your Price: $979.43

    You Save: 53%

  19. Rhin-O-Tuff 6mm Oval Hole Die Set For HD6500 and HD7000 - Modular Punch Diesets

    Part number: 946

    • 6mm Pitch Oval Hole Die
    • .2362 Hole Spacing
    • .172 x .138 Oval Hole Size
    • Rhin-O-Tuff Part Number: 000946

    Your Price: $980.00

  20. Fellowes AutoMax 300C Walk Away Level P-4 Cross Cut Shredder - Security Level

    Part number: 4651501

    • Auto Start/Stop: Yes - Electronic
    • Run Time: Up to 30 minutes.
    • Color: Black
    • Casters: Yes

    List Price: $1,559.98

    Your Price: $964.00

    You Save: 38%

  21. Baumfolder Lawson 42" MPU-42 Pacemaker II HSS Blade - Replacement Blades

    Part number: JH-38800HSS

    • Compatible Models: Baumfolder, Lawson 42inch , MPU-42, Pacemaker II Material: High Speed Steel Holes: 27 Length: 53inch With: 5inch Thickness: 0.495inch Part Number: JH-38800HSS , 38800HSS , KN38800HSS

    Your Price: $959.29

  22. GBC VeloBind Magnapunch and 660id Die Set - Modular Punch Diesets

    Part number: 7707180

    • Type: GBC Magnapunch / Ibico 660ID Die Set Manufacturer: GBC (General Binding Corporation) Punching Pattern: Velobind Pitch: 1inch On Center Hole Shape: Round GBC Part Number: 7707180

    List Price: $1,159.00

    Your Price: $956.29

    You Save: 17%

  23. GBC 660ID 2-4 Looseleaf Magnapunch and 660id Die Set - Modular Punch Diesets

    Part number: 7707200

    • Type: GBC Magnapunch / Ibico 660ID Die Set Manufacturer: GBC (General Binding Corporation) Punching Pattern: 2-4hole for A4 European Paper Pitch: n/a Hole Shape: Round GBC Part Number: 7707200

    List Price: $1,159.00

    Your Price: $956.29

    You Save: 17%

  24. GBC 660ID 3-5-7 Looseleaf Magnapunch and 660id Die Set - Modular Punch Diesets

    Part number: 7707190

    • Type: GBC Magnapunch / Ibico 660ID Die Set Manufacturer: GBC (General Binding Corporation) Punching Pattern: 3-5-7hole for Looseleaf Pitch: n/a Hole Shape: Round GBC Part Number: 7707190

    List Price: $1,159.00

    Your Price: $956.29

    You Save: 17%

  25. McCain MT1088C Top Side Tungsten Carbide Replacement Blades -JH41120TCT

    Part number: JH-41120TCT

    • Material: Tungsten carbide tipped Compatible Models: McCain MT-1088C Model A, BA, MTA, #1800 & #2000 Holes: 4 Slots Hole Size: 1/2inch - 13 Length: 13inch Width: 5inch Thickness: 0.5inch Part Number: JH-41120TCT

    Your Price: $953.19

  26. Fletcher-Terry Titan 60" Board Cutter - Board Trimmers

    Part number: Fletcher-Titan60

    • Dual head position for cutting and trimming.
    • Through-cutting for semi-rigid materials.
    • Trimming feature for flexible vinyls, photo paper, and canvas.
    • No need for two cutters dedicated to each function; saves on space and equipment investment.

    Your Price: $949.00

  27. Wilson Jones 1" Black Casebound DublLock Ring Oversize Binders - 12pk - Specialty Binders

    Part number: W344-70

    • 1" binder size holds 175 sheets secure with heavy duty DublLock┬« round rings
    • Durable vinyl covers
    • Heavy weight interior chipboard material
    • Binder holds 11" x 17" sheets

    List Price: $1,197.84

    Your Price: $934.89

    You Save: 21%

  28. GBC SureBind Magnapunch and 660id Die Set - Modular Punch Diesets

    Part number: 7707240

    • Type: GBC Magnapunch / Ibico 660ID Die Set Manufacturer: GBC (General Binding Corporation) Punching Pattern: SureBind Pitch: SureBind Hole Pattern Hole Shape: Round GBC Part Number: 7707240

    List Price: $1,159.00

    Your Price: $937.29

    You Save: 19%

  29. Drytac JetMounter JM26 Electric 26 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators

    Part number: DTJM26

    • Max Laminating Width: 26.25 inches (667mm)
    • Width: 33.25 inches (845mm)
    • Depth: 12.2 inches (310mm)
    • Height: 12.3 inches (312.5mm)

    List Price: $995.00

    Your Price: $931.85

    You Save: 6%

  30. Fletcher-Terry Gemini Pro 100" Rail Cutter - Board Trimmers

    Part number: GeminiPro100

    • Utilize table-mounted elevators to raise cutter above graphics for positioning cut line.
    • Features sight line strip for cutting accuracy.
    • No repositioning of the straight-edge required; allows you to line up the material for the entire length of the cut especially with large printed graphics or materials.
    • Eliminate fatigue/injuries while working with large graphics

    List Price: $956.00

    Your Price: $928.57

    You Save: 2%

Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80