Product listing: Lassco Wizer Cornerounder Corner Cutter - Corner Rounders (CR-50B) to Thermal-Printable TIMEBadge Expiring One Day Badge FRONTpart - Blank

Lassco Wizer Cornerounder Corner Cutter - Corner Rounders

Part number: CR-50B

The Model CR-50B heavy duty bench model corner rounder is designed with smooth rigid cutting action for hard-to-do jobs.
It accepts a full range of interchangeable cutting units (1/16" to 1-1/2" radii) with a maximum cutting depth of 1/2".
One standard cutting unit (1/8", 1/4", 3/8", or 1/2") is included.
For cutting paper and plastic products.

List Price: $390.00

Your Price: $298.99

You Save: 23%

Swingline Optima 70 Electric Stapler

Part number: SWI-48210

Sheet Capacity : 70 Color(s): Silver GBC Quartet Part Number: S7048210 Primary UPC: 074711482103 Warranty: 5Year Manufacturer Warranty

List Price: $610.91

Your Price: $298.98

You Save: 51%

Xyron 2500 Repositionable Acid Free Adhesive Roll Set - 170' - Laminating Cartridges

Part number: AT406-170

Roll Set Type: Repositionable Acid Free Adhesive
Length: 170'
No heat, electricity or batteries required.
Part Number: AT406-170

List Price: $436.54

Your Price: $298.62

You Save: 31%

Xyron 2500 Laminate / High Tack Adhesive Roll Set - 300' - Laminating Cartridges

Part number: LAT405-300

Roll Set Type: One Side Laminate / One Side High Tack Adhesive
Length: 300'
No heat, electricity or batteries required.
Part Number: LAT405-300

List Price: $469.14

Your Price: $299.52

You Save: 36%

5mil Matte Low Melt Laminating Film - 25" x 200'

Part number: DL-CM2525-1

Film Type: Premium Low Melt Thickness: 5Mil Roll Width: 25inch Roll Length: 200feet Film Finish: Matte / Satin Core Size: 1inch Operating Temperature: 220 Degrees Part Number: DL-CM2525-1 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

Your Price: $299.39

Akiles Roll @ Blade 1815 18" Rotary Trimmer

Part number: AK1815

Model Number: Akiles Roll @ Blade 1815 Table Size: 18inchx15inch Cutting Length: 18inch Cutting Capacity: 15Sheets Weight: 17lbs Warranty: 1Year Manufacturer Warranty

List Price: $339.00

Your Price: $298.20

You Save: 12%

GBC Designer Midnight Blue Pathway Index Tabs - Specialty Covers

Part number: 2001880G

Tab Type: GBC Designer Paper Thickness: 80lb. Stock Tab Size: 11inchx9inch (Letter Size Plus 1/2inch Tab Extension) Color: Midnight Blue Pathway Printing: Silver Foil #I-V Quantity: 25 Sets (5 Tabs Per Set) Part Number: 2001880G, G2001880 , 2001880

List Price: $343.95

Your Price: $297.49

You Save: 13%

Mandelli Miracle 63 LMM 62 24" Cut Replacement Blade

Part number: JH-42295

Compatible Models: Mandelli, Miracle 63, LMM 62 Material: Standard Inlay Holes: 5 Length: 30.709inch With: 3.15inch Thickness: 0.315inch Notes: 24inch Cut Part Number: JH-42295 , 42295 , KN42295

Your Price: $296.79

Kolbus HD150 HD151 High Speed Steel Top Front Blade - Replacement Blades

Part number: JH-38070HSS

Compatible Models: Kolbus HD 150, HD 151 Material: High Speed Steel Holes: 10 Length: 22.047inch With: 4.53inch Thickness: 0.394inch Notes: Top Front Part Number: JH-38070HSS , 38070HSS , KN38070HSS

Your Price: $296.79

Quartet 6' x 4' Connectable Modular Sand Vinyl Tack Board with Graphite Frame - Combination Boards

Part number: QRT-MB06N5

Designed to fit your needs - choose from a variety of surfaces and frame colors to complement your meeting room. Easily installed by one person in four simple steps. Each item comes complete with surface, frame, track kit, marker tray and mounting hardware. Superior design and materials including 1/2inch fire retardant backing, and an extra deep marker rail without sharp edges. Delivered by a superior carrier on-time and in perfect condition the first time. Board system designed for easy upgrade and surface replacement. Board Surface: Sand Colored Vinyl Tack Bulletin Surface Board Size: 6feetx4feet Frame: Graphite Frame Surface GBC Quartet Part Number: MB06N5 Primary UPC: 034138083352

List Price: $488.66

Your Price: $296.69

You Save: 39%

HSM Securio C16s Level P-2 Strip Cut Office Shredder - Security Level

Part number: HSM-1901

Made in Germany: All HSM Classic & Securio Models are Made in Germany. Precision Engineering. TAA Compliant.
Solid Steel Cutting Cylinders: Cutting Heads are Manufactured from 100% Steel. Maintains High Cutting Capabilities While Using Less Energy. V-groove Technology Ensures Precise Cutting.
Cutting Cylinder Lifetime Warranty: Lifetime Warranty on Solid Steel Cutting Cylinders. Patented "V-Tek" Cutting Groove Technology. Higher Cutting Capacity. Lower Power Requirements.
Anti-Jam Technology with Reverse Function: Prevents Jams When Machine is Overloaded. Increasing Productivity. Saves Unanticipated Repair Costs.

List Price: $799.96

Your Price: $296.60

You Save: 62%

Powis Parker Fastback Hardcover Guide - Fastback Binding

Part number: PPHCG2

Professional Results--- Produce hard cover books that match commercially manufactured books in quality and durability.
Easy to Use --- It only takes a few minutes to learn to use the Fastback Hardcover System. Anyone can be up and in production immediately.
No Set-Up --- Whether you make one book, or one thousand, there is never any set-up, so there is never any waste.
Saves Money --- Produce only as many books as you need. There is never any overstock.

Your Price: $295.00

1.7 Mil Matte Low Melt Laminating Film 25" x 500' - 1" Core

Part number: DL-CM25517-1

Film Type: Low Melt Film Thickness: 1.7Mil Roll Width: 25inch Roll Length: 500feet Film Finish: Matte Core Size: 1inch Operating Temperature: 230 Degrees Part Number: DL-CM25517-1 GBC Part Number: 3125118, G3125118 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

Your Price: $294.49

White 1/2" Foam Core 30" x 40" Mounting Boards - 25pk

Part number: 550433

Board Type: Uncoated Foam Core Mounting Boards Board Thickness: 1/2inch Board Size: 30inchx40inch Board Color: White Quantity: 25 Per Box Part Number: 550433

Your Price: $295.29

Pro-Bind HardBack Book Hard Cover Crimper - Thermal Binding

Part number: BIHCCRIMPER

Manufacturer: Pro-Bind
Capacity: 1 book (up to 2" thick)
Weight: 9 lbs
Part Number: BIHCCRIMPER

List Price: $325.00

Your Price: $295.00

You Save: 9%

Horizon 3-Knife HT70 HSS Front And Side Replacement Blade

Part number: JH-37697HSS

Compatible Models: Horizon 3-Knife, HT-70 Material: High Speed Steel Holes: 12 Length: 15.748inch Width: 2.756inch Thickness: 0.374inch Notes: Front (L&R) Part Number: JH-37697HSS , 37697HSS , KN37697HSS

Your Price: $291.49

Fellowes Powershred 99Ci Level P-4 Cross-Cut Paper Shredder

Part number: 3229901

100% Jam Proof System eliminates paper jams and powers through tough jobs.
SafeSense Technology stops shredder when hands touch the paper opening.
SilentShred offers ultra-quiet shredder performance for shared workspaces.
Energy Savings System provides optimal energy efficiency 100% of the time-in use and out of use.

List Price: $672.70

Your Price: $294.46

You Save: 56%

Drytac MHL Matt UV 3mil 38" x 500' Low Temp Thermal Laminating Film - Low Melt

Part number: MM38503

MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

List Price: $420.56

Your Price: $294.39

You Save: 30%

Challenge 20 Multi 2020 Titan 200 Replacement Blade

Part number: JH-31780

Compatible Models: Challenge, Multi 20, MULTI 2020, TITAN 200 Material: Standard Inlay Holes: 4 Length: 23.75inch Width: 3inch Thickness: 0.374inch Notes: Part Number: JH-31780 , 31780 , KN31780

Your Price: $145.19

Tamerica DuraWire 450 Manual Twin Loop Wire Closer - Wire Binding

Part number: TDURAWIRE450

Heavy Duty All metal wire closing machine
Closes wire up to legal size documents and more due to open ends.
Closes up to 1 1/4" diameter wire loops.
Compatible with all standard wire punching formats, 3:1 & 2:1

List Price: $299.00

Your Price: $292.15

You Save: 2%

Polar 71 72C 75 Replacement Blade

Part number: JH-43250

Compatible Models: Polar 71, 72 C, 75 Material: Standard Inlay Holes: 12 Length: 34.173inch With: 4.094inch Thickness: 0.381inch Notes: Part Number: JH-43250 , 43250 , KN43250

Your Price: $291.49

Tamerica TCC-SP410 Spiral Coil Binding Machine

Part number: TCCSP410

Manual Coil Punch and Bind.
Oval Holes for easier coil insertion.
Open-end punch throat.
Fully disengageable pins.

List Price: $499.00

Your Price: $288.99

You Save: 42%

10mil Gloss Low Melt Laminating Film - 18" x 500'

Part number: CBD10G18500-3

Film Type: Premium Low Melt Thickness: 10Mil Roll Width: 18inch Roll Length: 500feet Film Finish: Gloss Core Size: 3inch Operating Temperature: 220 Degrees Part Number: CBD10G18500-3 *** Most individuals with roll laminators will order film in pairs. The price above is per roll. ***

Your Price: $290.69

Premier Heavy Duty 30" Wood Paper Trimmer - Martin Yale

Part number: PRW30

Heavy-duty 3/4inch thick wood base Self-sharpening stainless steel blades cut up to 20sheets at once Cutting length: 30inch Accurately cuts paper, mat board, cardboard, film, tissue and textiles Permanent 1/2inch grid and dual English and metric rulers Patented automatic blade latch locks with every cutting motion Finger guard protects entire length of blade Torsion spring prevents blade from accidentally falling during operation Ergonomic soft-grip handle Warranty: Lifetime Manufacturer Warranty Non-skid rubber feet Dimensions: 40.38inchx25.25inchx5.50inch Weight: 38 lbs. UPC: 0-11991-02300-8

List Price: $639.00

Your Price: $289.98

You Save: 54%

GBC / Swingline CombBind C110e Plastic Comb Binding Machine

Part number: 7704250C

Electric design can punch up to 15 sheets and bind up to 330 sheets.
Punches and binds simultaneously for the most efficient binding.
Comb selection guide helps determine the appropriate comb size.
Chip drawer has a window to easily see when it needs emptying.

List Price: $547.66

Your Price: $289.93

You Save: 47%

Rotatrim 18" Professional Rotary Cutter - Foster Keencut

Part number: 60120

Steel end castings are mounted to a high density laminated particleboard with screen printed grid in inches and metric.
18" rule supplied with adjustable squaring arm.
5 Year full warranty.
Self-sharpening tungsten steel cutting blade for clean cuts every time.

List Price: $350.00

Your Price: $288.29

You Save: 17%

Akiles iCoil 41 Plus Oval Hole Spiral Coil Binding Machine

Part number: AIC-41+

Punches up to 15 sheets of 20lbs bond paper
Harden Steel dies: For a clean and precise punch every time, even when perforating delicate or hard to punch materials, such as PVC, PP, Polyester, etc.
Ergonomic Handle: Maximizes punching-strength, for an effortless perforation.
Strong: Metal chassis and high quality components guarantee durability and reliability.

List Price: $549.00

Your Price: $288.99

You Save: 47%

Dahle Model 556 Professional 37 1/2 Inch Rolling Trimmer - Rotary Trimmers

Part number: DAH556

Blade is made of ground steel and encased in a plastic housing for safety Self-sharpening blade cuts in either direction Automatic paper clamp holds work securely Inch and metric measurements with metric sizing grid for precise cuts Sturdy metal base will not warp or crack Adjustable backstop Can be wall mounted Optional paper roll holder available Shown on optional floor stand Cutting Length: 37 1/2inch Cutting Capacity: 14sheets Dimensions: 45 1/2inchx14inch Part Number: 556 Warranty: Lifetime Limited Manufacturer Warranty UPC Code: 76769556003

List Price: $600.00

Your Price: $286.37

You Save: 52%

Polar 55 Replacement Blade

Part number: JH-43200

Compatible Models: Polar 55 Material: Standard Inlay Holes: 14 Length: 26.968inch With: 3.74inch Thickness: 0.381inch Notes: Part Number: JH-43200 , 43200 , KN43200

Your Price: $286.19

Thermal-Printable TIMEBadge Expiring One Day Badge FRONTpart - Blank - TEMPbadges

Part number: 06151

Type: Blank One Day Attachment Method: FRONTpart to be attached to BACKpart (sold separately) Size: 1 15/16inchx2 13/16inch (49mmx73mm) Quantity: 1000 Per Pack Part Number: 06151

Your Price: $285.79

Product listing: Lassco Wizer Cornerounder Corner Cutter - Corner Rounders (CR-50B) to Thermal-Printable TIMEBadge Expiring One Day Badge FRONTpart - Blank - TEMPbadges (06151)