Need Help 1-800-944-4573 1-800-944-4573

Product listing: Destroyit MBM 2503 Micro Cut Paper Shredder - DSH0301 - Security Level (MB-2503MC)   to   Fellowes Quasar 130 Double Loop Wire Binding Machine (5217401)

  1. Destroyit MBM 2503 Micro Cut Paper Shredder - DSH0301 - Security Level

    Part number: MB-2503MC

    • Quiet and powerful single phase motor (3/4 maximum horsepower)
    • Fully enclosed, dust proof gearbox housing
    • High quality wooden cabinet mounted on casters
    • Pull-out bag frame for disposable shred bags

    List Price: $1,929.00

    Your Price: $1,139.00

    You Save: 40%

  2. Destroyit MBM 2604 Level P-4 Cross Cut Paper Shredder - DSH0362 - Security Level

    Part number: MB-2604CC

    • Quiet and powerful single phase motor (1 maximum horsepower) rated for continuous operation
    • Fully enclosed, dust proof gearbox housing
    • High quality wooden cabinet mounted on casters
    • Pull-out bag frame mechanism mounted on rollers for easy replacement of disposable shred bags

    List Price: $2,629.00

    Your Price: $1,549.00

    You Save: 41%

  3. Docucopy 20lb 8.5" x 11" Reinforced Edge Paper - 2500 Sheets - Holmberg

    Part number: HO7500

    • Tough reinforced paper to keep important pages secured in the binder.
    • Pages lay perfectly flat with no thickness buildup to prevent misfeeds and jams.
    • Ideal for the most important papers in your business.
    • Full reams can easily be loaded into laser or injet printers, copiers, and presses for jam-free production.

    Your Price: $107.39

  4. Docucopy 24lb 11" x 17" Reinforced Edge Paper - 2000 Sheets - Holmberg

    Part number: HO7530

    • Tough reinforced paper to keep important pages secured in the binder.
    • Pages lay perfectly flat with no thickness buildup to prevent misfeeds and jams.
    • Ideal for the most important papers in your business.
    • Full reams can easily be loaded into laser or injet printers, copiers, and presses for jam-free production.

    Your Price: $195.29

  5. Drylam 27" Professional Series Roll Laminator - Commercial Laminators

    Part number: DL-27STA

    • Laminates up to 27" wide.
    • Up to 9.5' per minute
    • User defined Preset save speed and temperature settings
    • Usage counter with reset

    Your Price: $1,786.90

  6. Drytac FaceMount 51" x 150' Optically Clear Mounting Adhesive

    Part number: PSF51150

    • Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
    • Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
    • Suitable for indoor and short-term outdoor use.
    • Film Finish: Clear Polyester

    List Price: $1,196.80

    Your Price: $837.76

    You Save: 30%

  7. Drytac JetMounter Electric 34 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators

    Part number: JM34

    • Max Laminating Width: 34.25" (86.9 cm)
    • Max Board Thickness: .75" (1.9 cm)
    • Unpacked Weight: 70.5 lbs (32 kg)
    • Width: 41.33" (105 cm)

    Your Price: $1,498.95

  8. Drytac MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

    Part number: PSA26-38164

    • Roll Width: 38"
    • Roll Length: 164'
    • Core Size: 3"
    • Laminate Type: MediaTac Adhesive

    List Price: $385.94

    Your Price: $270.16

    You Save: 29%

  9. Drytac MediaTac 51" x 164' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

    Part number: PSA26-51164

    • Roll Width: 51"
    • Roll Length: 164'
    • Core Size: 3"
    • Laminate Type: MediaTac Adhesive

    List Price: $454.01

    Your Price: $317.81

    You Save: 29%

  10. Drytac MHL Gloss 3mil 43" x 500' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD43503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $371.02

    Your Price: $259.71

    You Save: 30%

  11. Drytac MHL Gloss 5mil 51" x 250' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD51205

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $427.90

    Your Price: $299.53

    You Save: 30%

  12. Drytac MHL Gloss 5mil 61" x 250' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD61205

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $511.80

    Your Price: $358.26

    You Save: 30%

  13. Drytac MHL Matt UV 3mil 61" x 500' Low Temp Thermal Laminating Film - Low Melt

    Part number: MM61503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $675.14

    Your Price: $472.60

    You Save: 29%

  14. Drytac MHL Scribe 3mil 38" x 500' Dry Erase Laminating Film - Pressure Sensitive

    Part number: MS38503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    Your Price: $244.20

  15. Drytac MHL Scribe 3mil 51" x 500' Dry Erase Laminating Film - Pressure Sensitive

    Part number: MS51503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $468.16

    Your Price: $327.71

    You Save: 30%

  16. Drytac Trimount 11" x 14" Dry Mounting Tissue - 100 Sheets - Mounting Adhesives

    Part number: TR3210

    • Size: 11" x 14"
    • Carrier: Paper/off-white
    • Adhesive Bond: Permanent
    • Adhesive Base: Solvent acrylic

    List Price: $100.89

    Your Price: $70.62

    You Save: 30%

  17. Drytac Trimount 25.5" x 300' Dry Mounting Tissue

    Part number: TR25300

    • Size: 25.5" x 300'
    • Carrier: Paper/off-white
    • Adhesive Bond: Permanent
    • Adhesive Base: Solvent acrylic

    List Price: $394.70

    Your Price: $276.29

    You Save: 30%

  18. Drytac Trimount 36.5" x 300' Dry Mounting Tissue

    Part number: TR36300

    • Size: 36.5" x 300'
    • Carrier: Paper/off-white
    • Adhesive Bond: Permanent
    • Adhesive Base: Solvent acrylic

    List Price: $650.98

    Your Price: $455.69

    You Save: 29%

  19. Drytac Trimount 41" x 150' Dry Mounting Tissue

    Part number: TR41150

    • Size: 41" x 150'
    • Carrier: Paper/off-white
    • Adhesive Bond: Permanent
    • Adhesive Base: Solvent acrylic

    List Price: $341.67

    Your Price: $239.17

    You Save: 29%

  20. Drytac Trimount 41" x 300' Dry Mounting Tissue

    Part number: TR41300

    • Size: 41" x 300'
    • Carrier: Paper/off-white
    • Adhesive Bond: Permanent
    • Adhesive Base: Solvent acrylic

    List Price: $650.98

    Your Price: $455.69

    You Save: 29%

  21. Duplo Sunray 486 490 Guillotine HSS Blade - Replacement Blades

    Part number: JH-10120HSS

    • Material: High Speed Steel Compatible Models: Sunray 486/490 Guillotine Holes: 5 Holes Hole Size: M10 Length: 24.016inch Width: 3.346inch Thickness: 0.315inch Part Number: JH-10120HSS

    Your Price: $427.09

  22. Event Size Premium Vinyl Horizontal Clip-On Badge Holder - 100pk

    Part number: 504-J

    • Type: Event Size Clip-On Badge Holder Color: Clear Orientation: Horizontal Connector: Rotating Clip Max Card Size: 4inchx3inch (76mmx102mm) Quantity: 100 Per Pack Part Number: 504-J

    Your Price: $61.49

  23. Fellowes Callisto 125 Pouch Laminator

    Part number: 5729101

    • Pouch Tracking System detects and alerts the user if there is a mis-feed and will automatically reverse the document until the jam is cleared.
    • HotSwap Technology allows users to change between different pouch and document thicknesses without waiting.
    • Hot lamination for 3 or 5-mil pouches as well as cold pouches.
    • Reverse mode disengages pouch for re-centering or removal.

    List Price: $292.99

    Your Price: $142.42

    You Save: 51%

  24. Fellowes Fortishred 3250C Cross-Cut Paper Shredder - Security Level

    Part number: 4617001

    • Sheet Capacity (20 lb. paper): 22
    • Cut Type: Cross-Cut
    • Cut Size: 5/32" x 1 9/16"
    • Security Level: P-4

    List Price: $2,999.00

    Your Price: $1,588.88

    You Save: 47%

  25. Fellowes Orion E 500 Electric Comb Binding Machine

    Part number: 5643201

    • Application: Large Office Usage: Frequent Binding Type: Plastic Comb Manual or Electric Punching: Electric Binding Capacity: 500sheets Punching Capacity: 30sheets Ready Light/Binding Light: No Auto Shutoff: N/A Releasable Dies: Yes Adjustable Margin Depth: Yes Color: Gray Item H x W x D (inches): 9.75x15.75x19.75 Three-hole Punch: No Removable Binding System: No Part Number: 5643201 UPC Code: 043859620135 Suggested Price: $1,999.95 Warranty: 1Year Manufacturer Warranty

    List Price: $1,999.99

    Your Price: $1,017.85

    You Save: 49%

  26. Fellowes Plasma 150 15 Inch Guillotine Paper Cutter

    Part number: 5411002

    • Item Number: 5411002
    • Cutting Length (inches): 15"
    • Cutting Capacity: 40 Sheets
    • Number of Blades: 1

    List Price: $299.99

    Your Price: $148.99

    You Save: 50%

  27. Fellowes Plasma 180 18 Inch Guillotine Paper Cutter

    Part number: 5411102

    • Full size SafeCut safety shield protects user during cutting process.
    • Heavy-duty stainless steel blade cuts up to 40 sheets (20lb paper) at a time.
    • Foldable pre-assembled SafeCut Guard makes set-up and storage quick, easy, and safe.
    • Maximum 18” cutting width; solid metal base with non-skid feet.

    List Price: $349.99

    Your Price: $172.36

    You Save: 50%

  28. Fellowes Powershred 225Mi Micro-Cut Paper Shredder - Security Level

    Part number: 4620001

    • Sheet Capacity (20 lb. paper): 14
    • Cut Type: Micro-Cut
    • Cut Size: 5/64" x 15/32"
    • Security Level: P-5

    List Price: $2,233.03

    Your Price: $1,039.59

    You Save: 53%

  29. Fellowes Powershred 69Cb Cross Cut Paper Shredder - Security Level

    Part number: 3343301

    • Auto Start/Stop: Yes - Electronic
    • Continuous Run Time (minutes): 10 on / 20 off
    • Color: Black/Silver
    • Casters: Yes

    List Price: $422.83

    Your Price: $221.57

    You Save: 47%

  30. Fellowes Quasar 130 Double Loop Wire Binding Machine

    Part number: 5217401

    • User-friendly machine combines excellent performance and features.
    • Punches up to 15 sheets of paper at a time.
    • Binds up to 130 sheets with a 9/16” wire.
    • Allows user to punch & bind continuously for maximum productivity.

    List Price: $449.99

    Your Price: $255.16

    You Save: 43%

Page:   1   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   40   50   60   70   80