Product listing: Drylam School-Lam 27" School Laminator (DL-SL27) to Fellowes Plasma 150 15 Inch Guillotine Paper Cutter (5411002)

Page
View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. Drylam School-Lam 27" School Laminator (DL-SL27)


      Laminates up to 27" wide.
      Fixed speed at 5' per minute
      Uses School Grade Laminating Films , 1.5 mil and 3.0 mil
      Hand held slitter with convenient storage on the machine
      Adjustable Feedguide for precision lamination
      Incorporated safety sheild
      Keyswitch to prevent unauthorized use of machine
      Stop/Reverse function
      Adjustable temperature control
      Warranty: 1 Year Manufacturer Warranty
      Fixed speed at 5' per minute
      Laminating Speed: 5' per Minute
      Max Film Thickness: 3 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: DL-SL27

    $1770.36

  2. Drytac 55" x 450' Natural Kraft Paper (KP55450)


      Size: 55" x 450'
      Part Number: KP55450
      Film Finish: Kraft Paper
      Core Size: 3"
      Roll Width: 55"
      Roll Length: 450' ßÃЊ“Á
    Part #: KP55450

    $198.69

  3. Drytac Ferro Metal Paper 36" x 82' Magnet Receptive Material (DFE3682)


      Base Product: 2.0mil (50micron) steel
      Adhesive: None
      Coating: 4.0mil (100 micron) white paper on each side
      Initial Tack: None
      Release Liner: None
      Film Finish: Magnetic Sheet
      Core Size: 3"
      Thickness: 4 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: DFE3682

    $734.93

  4. Drytac JetMounter Electric 34 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (JM34)


      Max Laminating Width: 34.25" (86.9 cm)
      Max Board Thickness: .75" (1.9 cm)
      Unpacked Weight: 70.5 lbs (32 kg)
      Width: 41.33" (105 cm)
      Depth: 11.8" (30 cm)
      Height: 13. 38" (34 cm)
      Speed Range: 2.5-18 fpm (0.76.-5.5 mpm)
      Power: 115 VAC or 230 VAC 50/60 Hz
      Part Number: JM34
      Max Laminate Width: 34.25"
      Laminating Speed: 18' per Minute
      Max Film Thickness: 10 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: JM34

    $1498.95

  5. Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (DTJM18)


      Max Laminating Width: 18.25 inches (464mm)
      Width: 25.5 inches (648mm)
      Depth: 11.75 inches (299mm)
      Height: 13 inches (330mm)
      Weight: 51 lbs (23 kg)
      Roller Diameter: 2.5 inches (63.5mm)
      Max Nip Opening: 0.75 inches (19mm)
      Warranty: 1 Year Manufacturer Warranty
      Power: 115 VAC 50/60 Hz 50w
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Max Laminate Width: 18.25"
      Laminating Thickness: 3/4"
      Hot or Cold: Cold ßÃЊ“Á
    Part #: DTJM18

    $780.95

  6. Drytac MediaShield Heatset Emerytex UV 5mil 51" x 328' Overlaminate (ET51328)

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: ET51328

    $875.70

  7. Drytac MediaShield Heatset Satinex UV 3mil 38" x 164' Overlaminate (SX38164)

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX38164

    $346.05

  8. Drytac MediaShield Heatset Satinex UV 3mil 51" x 328' Overlaminate (SX51328)

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX51328

    $662.38

  9. Drytac MHA 25.5" x 328' Multi Heat Activated Mounting Adhesive (MHA25328)


      Film Width: 25.5"
      Film Length: 328'
      Core Size: 3"
      Filmic Carrier: None
      Adhesive Bond: Permanent:
      Initial Tack: Very Low
      Application Speed: 1' - 8' (0.3m - 2.5m) per minute
      Adhesive Base: Solvent acrylic heat-activated
      App. Temperature: 185 F - 220 F
      Release Liner: Moisture Stable Paper (100 gsm)
      Film Finish: Mounting Adhesive
      Core Size: 3"
      Adhesive Bond: Permanent:
      Hot or Cold: Hot ßÃЊ“Á
    Part #: MHA25328

    $357.52

  10. Drytac MHA 41" x 328' Multi Heat Activated Mounting Adhesive (MHA41328)


      Film Width: 41"
      Film Length: 328'
      Core Size: 3"
      Filmic Carrier: None
      Adhesive Bond: Permanent:
      Initial Tack: Very Low
      Application Speed: 1' - 8' (0.3m - 2.5m) per minute
      Adhesive Base: Solvent acrylic heat-activated
      App. Temperature: 185 F - 220 F
      Release Liner: Moisture Stable Paper (100 gsm)
      Film Finish: Mounting Adhesive
      Core Size: 3"
      Adhesive Bond: Permanent:
      Hot or Cold: Hot ßÃЊ“Á
    Part #: MHA41328

    $562.34

  11. Drytac MHL Gloss 3mil 38" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD38503)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD38503

    $151.02

  12. Drytac MHL Gloss 3mil 51" x 500' Low Temp Thermal Laminating Film - Low Melt (MGD51503)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD51503

    $308.07

  13. Drytac MHL Gloss 5mil 25" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD25205)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD25205

    $146.83

  14. Drytac MHL Gloss 5mil 61" x 250' Low Temp Thermal Laminating Film - Low Melt (MGD61205)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MGD61205

    $358.26

  15. Drytac MHL Impervo UV 5mil 38" x 250' Hardcoat Laminating Film - UV Protected (MLL38205)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MLL38205

    $637.46

  16. Drytac MHL Matt UV 3mil 61" x 500' Low Temp Thermal Laminating Film - Low Melt (MM61503)

      MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
    Part #: MM61503

    $472.60

  17. Drytac Protac High Gloss UV 5.0mil 38" x 150' PS Overlaminate - Pressure Sensitive (PLHG3385)


      Film Width: 38"
      Film Length: 150'
      Film Thickness: 5.0mil
      Core Size: 3"
      Finish: Gloss
      Base Film: 4 mil (100 micron) Polyester
      Adhesive: 1.0mil solvent acrylic
      Initial Tack: High
      Application Speed: 1' - 6' per minute
      Application Temperature: Room Temperature - 120 F
      Release Liner: Clear Polyester Film
      Film Finish: Gloss
      Core Size: 3"
      Film Thickness: 5.0mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PLHG3385

    $470.20

  18. Drytac Protac High Gloss UV 5.0mil 51" x 150' PS Overlaminate - Pressure Sensitive (PLHG3515)


      Film Width: 51"
      Film Length: 150'
      Film Thickness: 5.0mil
      Core Size: 3"
      Finish: Gloss
      Base Film: 4 mil (100 micron) Polyester
      Adhesive: 1.0mil solvent acrylic
      Initial Tack: High
      Application Speed: 1' - 6' per minute
      Application Temperature: Room Temperature - 120 F
      Release Liner: Clear Polyester Film
      Film Finish: Gloss
      Core Size: 3"
      Film Thickness: 5.0mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PLHG3515

    $620.55

  19. Drytac Protac Polycarbonate UV 10.0mil 51" x 75' PS Overlaminate - Pressure Sensitive (PPC51075-10)


      Film Width: 51"
      Film Length: 75'
      Film Thickness: 10.0mil
      Core Size: 3"
      Finish: Polycarbonate (Pebble Textured Velvet Matte)
      Base Film: 10.0 mil (250 micron) polycarbonate
      Adhesive: 2.0 mil solvent acrylic
      Initial Tack: High
      Application Speed: 1' - 4' per minute
      Application Temperature: Room Temperature - 90 F
      Release Liner: Clear Polyester
      Film Finish: Matte
      Core Size: 3"
      Film Thickness: 10.0mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PPC51075-10

    $600.54

  20. Drytac Trimount 8.5"x 11" Dry Mounting Tissue - 100 Sheets - Mounting Adhesives (TR3207)


      Size: 8.5"x 11"
      Carrier: Paper/off-white
      Adhesive Bond: Permanent
      Adhesive Base: Solvent acrylic
      Initial Tack: None
      Precessing Temperature: 85 DegreesC-100 Degrees (185 DegreesF-212 DegreesF)
      Release Liner: None
      Dwell Time: 30-90 seconds
      Part Number: TR3207
      Film Finish: Mounting Tissue
      Thickness: 3 mil
      Dwell Time: 30-90 seconds
      Hot or Cold: Hot ßÃЊ“Á
    Part #: TR3207

    $48.69

  21. Drytac WindowTac 51" x 164' Pressure Sensitive Mounting Adhesive (PWD51164)

      Features:
      Clear, double-sided mounting adhesive with an embossed release liner
      Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
      Excellent clarity without bubbles or wrinkling
      Provides additional UV protection for graphics printed with dye-based or pigmented inks Benefits:
      Transforms any printed image into an easy-to-install window graphic or decal
      Graphics can be dry installed, cleanly removed and easily repositioned during installation
      Suitable for double-sided window graphics
      Ideal for face mounting of temporary graphics to glass, acrylic and other non-porous surfaces
      Ideal for short-term promotional window advertising and POP displays
      Clear, double-sided mounting adhesive with an embossed release liner
      Provides additional UV protection for graphics printed with dye-based or pigmented inks
      Excellent clarity without bubbles or wrinkling
      Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee ßÃЊ“Á
    Part #: PWD51164

    $512.30

  22. Durable Clear/Graphite DuraClip Report Cover (30 Sheets) - 25pk (DBL-2203-GE)

      Global Product Type: Report Covers-Clip Sheet Capacity : 30Sheet Type: Unpunched Back Cover Color(s): Graphite Clip Color(s): Black Number of Fasteners : 1Sheet Size (W x H): 11 in x 8 1/2 in Post-Consumer Recycled Content Percent : 0 % Quantity : 1 each Cover Material(s): Vinyl Front Cover Color(s): Clear Spine Color(s): Graphite Fastener Material: Steel Fastener Type: Clip Pre-Consumer Recycled Content Percent : 0 % Total Recycled Content Percent : 0 % Part Number: DBL-2203-GE
    Part #: DBL-2203-GE

    $57.25

  23. EBA MBM Multicut 10/520/550 5550 HSS Replacement Blade (JH-37780HSS)

      Compatible Models: EBA, MBM, Multicut 10/520/550, 5550 Material: High Speed Steel Holes: 10 Length: 25.984inch With: 4.094inch Thickness: 0.394inch Notes: Part Number: JH-37780HSS , 37780HSS , KN37780HSS
    Part #: JH-37780HSS

    $418.69

  24. EBA MBM Multicut 10/520/550 5550 Replacement Blade (JH-37780)

      Compatible Models: EBA, MBM, Multicut 10/520/550, 5550 Material: Standard Inlay Holes: 10 Length: 25.984inch With: 4.094inch Thickness: 0.394inch Notes: Part Number: JH-37780 , 37780 , KN37780
    Part #: JH-37780

    $344.49

  25. Event Badge Holders for Name Badges and Business Cards 100pk (1840-5052)

      Type: Name Badge Holder Color: Clear Top Insert Size: Holds Up to 6 Business Cards (2inchx3-3/4inch ) Bottom Insert Size: Holds One Name Badge (4-7/8inchx3-3/4inch ) Connectors: Slot and Chain Holes Quantity: 100 Per Pack Part Number: 1840-5052
    Part #: 1840-5052

    $59.39

  26. Event Size Premium Vinyl Horizontal Clip-On Badge Holder - 100pk (504-J)

      Type: Event Size Clip-On Badge Holder Color: Clear Orientation: Horizontal Connector: Rotating Clip Max Card Size: 4inchx3inch (76mmx102mm) Quantity: 100 Per Pack Part Number: 504-J
    Part #: 504-J

    $61.49

  27. Fellowes Fortishred 2250C Cross-Cut Paper Shredder - Security Level (4616001)


      Sheet Capacity (20 lb. paper): 14
      Cut Type: Cross-Cut
      Cut Size: 5/32" x 1 9/16"
      Security Level: P-4
      Speed (FPM): 20
      Run Time: Continuous
      Users: 3-5
      Throat Width: 10.25"
      Jam Prevention: Yes
      Safety Features: Safe Shield
      SilentShred: Yes
      Energy Savings Feature: Yes
      Auto-Oil: No
      Bin Type: Removable Basket
      Bin Capacity in Gallons: 20
      Bin Full Indicator: Yes
      Continuous Form (80/132): 80
      Casters: Yes
      Electronic Auto Start/Stop: Yes
      Motor Type: Induction
      Warranty (Full/Cutter): 2/30
      UPC Code: 043859648696
      Dimensions (HxWxD): 34.25" x 19.7" x 15"
      Weight: 71
      Shredder Oil Item #: 35250
      Shredder Waste Bag Item #: 36054
      Shred Capacity: 14 Sheets
      Cut Style: Cross Cut
      Security Level: P-4
      Waste Bin Capacity: 20 gal. ßÃЊ“Á
    Part #: 4616001

    $1085.59

  28. Fellowes Fortishred 3850C Cross-Cut Paper Shredder - Security Level (4617801)


      Sheet Capacity (20 lb. paper): 24
      Cut Type: Cross-Cut
      Cut Size: 5/32" x 1 9/16"
      Security Level: P-4
      Speed (FPM): 20
      Run Time: Continuous
      Users: 6-10
      Throat Width: 15.75"
      Jam Prevention: Yes
      Safety Features: Safety Shield
      SilentShred: Yes
      Energy Savings Feature: Yes
      Auto-Oil: No
      Bin Type: Removable Basket
      Bin Capacity in Gallons: 44
      Bin Full Indicator: Yes
      Continuous Form (80/132): 80/132
      Casters: Yes
      Electronic Auto Start/Stop: Yes
      Motor Type: Induction
      Warranty (Full/Cutter): 2/30
      UPC Code: 043859648832
      Dimensions (HxWxD): 38.2" x 25.2" x 23.25"
      Weight: 185
      Shredder Oil Item #: 35250
      Shredder Waste Bag Item #: 3604101
      Shred Capacity: 24 Sheets
      Cut Style: Cross Cut
      Security Level: P-4
      Waste Bin Capacity: 44 gal. ßÃЊ“Á
    Part #: 4617801

    $1894.84

  29. Fellowes P-35C Deskside Cross Cut Paper Shredder - Security Level (3213501)


      Patented SafetyLock disables shredder for added safety protection
      Shreds 5 sheets per pass into 5/32” x 1-1/2” cross-cut particles (Security Level P-4)
      Also safely shreds staples, paper clips and plastic credit cards
      Shreds for up to 2 minutes before a 20 minute cool down period is needed
      3-gallon bin with easy lift-off head and integrated handle for hassle-free waste disposal
      For personal use
      12.6”H x 13.8”W x 7.9”D
      Shred Capacity: 5 Sheets
      Cut Style: Cross Cut
      Security Level: P-4
      Waste Bin Capacity: 3 gal. ßÃЊ“Á
    Part #: 3213501

    $89.68

  30. Fellowes Plasma 150 15 Inch Guillotine Paper Cutter (5411002)


      Item Number: 5411002
      Cutting Length (inches): 15"
      Cutting Capacity: 40 Sheets
      Number of Blades: 1
      Item H x W x D: 5" x 14.5" x 27"
      List Price: $279.99
      UPC Code: 043859555185
      Warranty: 2 Year Manufacturer Warranty
      Cutting Length (inches): 15"
      Cut Type: Guillotine
      Cutting Capacity: 40 Sheets
      Paper Clamp: Yes ßÃЊ“Á
    Part #: 5411002

    $148.99

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   70   80