Product listing: Silver 3/8" 2:1 Pitch Twin Loop Wire - 100pk (W380SV21) to SealerSales FRM-1120LD Left Feed Vertical Dry Ink Coding Continuous Band Sealer (FRM-1120LD-LtoR)
-
Silver 3/8" 2:1 Pitch Twin Loop Wire - 100pk (W380SV21)
- Color: Silver
- Pitch: 2:1 (21 loops)
- Size: 3/8"
- Capacity: Approx. 50-60 sheets (20lb bond)
- Quantity: 100 Per Box
Part #: W380SV21 -
Silver 1-1/4" 2:1 Pitch Twin Loop Wire - 100pk (W114SV)
- Color: Silver
- Pitch: 2:1 (21 loops)
- Size: 1-1/4"
- Capacity: Approx. 220-280 sheets (20lb bond)
- Quantity: 100 Per Box
Part #: W114SV -
Sign-A-Bracket for Mounting Corrugated Plastic Board - 24/Pack (MYBSABB)
- Specifically designed for corrugated plastic substrates from 3 - 6mm thick.
- Use to secure signs in a variety of different applications including Poles, Post and Walls.
- Designed for various mounting options including screws, bolts and / or straps.
- Can secure to round or square posts, wood or metal, along a 90 degree corner or on flat walls/ceilings
- Eco-friendly product that is completely recyclable.
Part #: MYBSABB -
ShredCare Paper Shredder 43 Gallon Waste Bin Liners - 50pk (SCB5043)
- Specially made for the bigger office shredder waste bins.
- These 43 gallon capacity liners will fit most small and medium size shredder bins.
- Lightweight and durable liners.
- Easy way to dispose of shredder wastes without the mess.
- Comes in a easy-to-dispense box for your convenience.
Part #: SCB5043 -
Sentinel 6-Sheet Level P-4 Micro-Cut Paper Shredder (FM60P)
- Microcut for optimum security.
- Smaller waste particles means you empty less often.
- Easy to empty pullout basket
- Also shreds credit cards.
- Overheat indicator protects motor.
Part #: FM60P -
Sentinel 10-Sheet Level P-3 Cross-Cut Paper Shredder (FX102B)
- Shreds up to 10 (ten) sheets of paper or one credit card at a single pass - no need to remove staples or small paper clips.
- 5mm x 40mm cross-cut shred is security level P-3 rated - shreds 6.89 feet per minute.
- Auto start/stop, manual reverse function, lighted over-heat indictor, ultra-quiet operation, continuous run time of 2 minutes.
- Large 3.3 gallon waste basket with a window to see when the container is full.
- Manufacturer's 1-year limited.
Part #: FX102B -
SealerSales TISA 18" Automatic Impulse Sealers (TISA18)
- Automatic impulse sealing with precise electronic control.
- Dual mode operation: automatic or manual.
- Foot switch allows both hands to be free.
- 3 separate control settings for sealing time, recycle time, and congealing time to produce consistent seals.
- Includes electric foot switch and worktable.
Part #: TISA18 -
SealerSales ShrinkFast Model 998 Industrial Shrink Wrap Heat Gun (Model998)
- Powerful - With 245,000BTUs of power, you can shrink wrap a 40" x 48" x 60" pallet in less than two minutes.
- Lightweight - Sleek design and weighs only 2.2lbs. 998's ergonomic design and fan shaped combuster lead to an even and steady heat pattern for constant shrink wrapping.
- Safe - UL Listed with built-in safety mechanisms. "Dead man" trigger designed to automatically shut off the flame once trigger is released.
- Flexible - Extensions available in 4' and 6'.
- Durable - Full 1 year manufacturers' warranty on all parts and labor.
Part #: Model998 -
SealerSales Rotary Band Sealer (HRS-255)
- Easy to operate.
- Variable temperature control.
- Quiet operation.
- Fast warm up time (30 seconds to 180°C).
- Feeds left to right.
Part #: HRS-255 -
SealerSales Replacement Kit for YC-300HL L-Bar Sealer (RK-12L-YC-300HL)
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
- For Use With: YC-Series 12" x 18" L-Bar Sealer w/ Film Roller
- Quantity: 1 Set
- Part Number: RK-12L-YC-300HL
- Kit Includes: (2) heating element, (4) 3/4" 3mil PTFE adhesive.
Part #: RK-12L-YC-300HL -
SealerSales Replacement Kit for WN-1000HC Long Hand Impulse Sealer (RK-40HC-WN-1000HC)
- Kit Includes: (2) 2.7mm wide heating element, (2) 1/2" PTFE adhesive, 1ft. long roll of PTFE cover, and (1) blade.
- For Use With: 40" W-Series Long Hand Sealer w/ 2.7mm Seal Width w/ Sliding Cutter
- Quantity: 1 Set
- Part Number: RK-40HC-WN-1000HC
- Kit Includes: (2) 2.7mm wide heating element, (2) 1/2" PTFE adhesive, 1ft. long roll of PTFE cover, and (1) blade.
Part #: RK-40HC-WN-1000HC -
SealerSales Replacement Kit for WN-1000H Hand Impulse Sealer (RK-40H-WN-1000H)
- Kit Includes: (2) 2.7mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
- For Use With: 40" W-Series Long Hand Sealer w/ 2.7mm Seal Width
- Quantity: 1 Set
- Part Number: RK-40H-WN-1000H
- Kit Includes: (2) 2.7mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
Part #: RK-40H-WN-1000H -
SealerSales Replacement Kit for W-755AA Automatic Impulse Sealer (RK-30A5-W-755AA)
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
- For Use With: 30" W-Series Automatic Double Electromagnetic Impulse Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-30A5-W-755A
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
Part #: RK-30A5-W-755AA -
SealerSales Replacement Kit for W-650I I-Bar Sealer (RK-26B-W-650I)
- Kit Includes: (2) round heating element, (4) 3/4" 3mil PTFE adhesive.
- For Use With: 26" W-Series I-Bar Sealer w/ Film Roller w/ Round Wire
- Quantity: 1 Set
- Part Number: RK-26B-W-650I
- Kit Includes: (2) round heating element, (4) 3/4" 3mil PTFE adhesive.
Part #: RK-26B-W-650I -
SealerSales Replacement Kit for W-500IC I-Bar Sealer with Cutter (RK-20BC-W-500IC)
- Kit Includes: (2) 2.7mm heating element, (4) 3/4" 3mil PTFE adhesive, (1) blade.
- For Use With: 20" W-Series I-Bar Sealer w/ Sliding Cutter w/ Film Roller w/ 2.7mm Seal Width
- Quantity: 1 Set
- Part Number: RK-20BC-W-500IC
- Kit Includes: (2) 2.7mm heating element, (4) 3/4" 3mil PTFE adhesive, (1) blade.
Part #: RK-20BC-W-500IC -
SealerSales Replacement Kit for W-455AT Automatic Impulse Sealer (RK-18AD-WN-455AT)
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and (2) 1 ft. long roll of PTFE cover.
- For Use With: 18" W-Series Automatic Double Impulse Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-18AD-WN-455AT
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and (2) 1 ft. long roll of PTFE cover.
Part #: RK-18AD-WN-455AT -
SealerSales Replacement Kit for W-350I I-Bar Sealer (RK-14B-W-350I)
- Kit Includes: (2) round heating element, (4) 3/4" 3mil PTFE adhesive.
- For Use With: 14" W-Series I-Bar Sealer w/ Film Roller w/ Round Wire
- Quantity: 1 Set
- Part Number: RK-14B-W-350I
- Kit Includes: (2) round heating element, (4) 3/4" 3mil PTFE adhesive.
Part #: RK-14B-W-350I -
SealerSales Replacement Kit for TISH-400 Hand Impulse Sealer (RK-16H-TISH-400)
- Kit Includes: (2) 2mm wide or round (Your Choice) heating element, (2) 1/2" PTFE adhesive, and (2) 1-1/8" PTFE cover.
- For Use With: 16" TISH-Series Hand Sealer w/ 2mm Seal Width
- Quantity: 1 Set
- Part Number: RK-16H-TISH-400
- Kit Includes: (2) 2mm wide or round (Your Choice) heating element, (2) 1/2" PTFE adhesive, and (2) 1-1/8" PTFE cover.
Part #: RK-16H-TISH-400 -
SealerSales Replacement Kit for TISF-602 Foot-Operated Impulse Sealer (RK-24F-TISF-602)
- Kit Includes: (2) 2mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
- For Use With: 24" TISF Series Foot Sealer w/ 2mm Seal Width
- Quantity: 1 Set
- Part Number: RK-24F-TISF-602
- Kit Includes: (2) 2mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
Part #: RK-24F-TISF-602 -
SealerSales Replacement Kit for TISF-305 Foot-Operated Impulse Sealer (RK-12F5-TISF-305)
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
- For Use With: 12" TISF Series Foot Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-12F5-TISF-305
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
Part #: RK-12F5-TISF-305 -
SealerSales Replacement Kit for KS-FS605 Foot-Operated Impulse Sealer (RK-24F5-KS-FS605)
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
- For Use With: 24" Automatic Foot Impulse Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-24F5-KS-FS605
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
Part #: RK-24F5-KS-FS605 -
SealerSales Replacement Kit for FS-800H Hand Impulse Sealer (RK-32H-FS-800H)
- Kit Includes: (2) 2.8mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
- For Use With: 32" FS-Series Long Hand Sealer w/ 2.8mm Seal Width
- Quantity: 1 Set
- Part Number: RK-32H-FS-800H
- Kit Includes: (2) 2.8mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
Part #: RK-32H-FS-800H -
SealerSales Replacement Kit for FS-405 Hand Impulse Sealer (RK-16H5-FS-405)
- Kit Includes: (2) 5mm wide heating element (Your Choice), (2) 1/2" PTFE adhesive, and (2) 1 1/8" PTFE cover.
- For Use With: 16" FS-Series Hand Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-16H5-FS-405
- Kit Includes: (2) 5mm wide heating element (Your Choice), (2) 1/2" PTFE adhesive, and (2) 1 1/8" PTFE cover.
Part #: RK-16H5-FS-405 -
SealerSales Replacement Kit for FS-200 Hand Impulse Sealer (RK-8H-FS-200)
- Kit Includes: (2) 3mm wide or round heating element (Your Choice), (2) 1/2" PTFE adhesive, and (2) 1 1/8" PTFE cover.
- For Use With: 8" FS-Series Hand Sealer w/ 2mm Seal Width
- Quantity: 1 Set
- Part Number: RK-8H-FS-200
- Kit Includes: (2) 3mm wide or round heating element (Your Choice), (2) 1/2" PTFE adhesive, and (2) 1 1/8" PTFE cover.
Part #: RK-8H-FS-200 -
SealerSales Portable PTFE Coated 8" Direct Heat Sealer with Temp Controller (KF-200CS)
- Equipped with an adjustable temperature controller allows the user to control the amount of heat needed for different type of materials.
- A 5-15 minute warm up time is required to achieve the correct temperature.
- Lightweight and easy to use anywhere
- Ideal for sealing small, irregular or extra long packages
- Recommended for sealing cellophane, coated aluminum foil, kraft paper and other thicker materials.
Part #: KF-200CS -
SealerSales Portable PTFE Coated 6" Direct Heat Sealer with Temp Controller (KF-150CSTA)
- 6" Direct Heat Sealer.
- Ideal for sealing cellophane, coated aluminum foil, Kraft paper, and other thicker materials.
- Two PTFE coated, serrated jaws.
- Seal Width - 5/8" or 15mm.
- Adjustable temperature controller for wider range of settings.
Part #: KF-150CSTA -
SealerSales Portable PTFE Coated 12" Direct Heat Sealer with Temp Controller (KF-300CS)
- Equipped with an adjustable temperature controller allows the user to control the amount of heat needed for different type of materials.
- A 5-15 minute warm up time is required to achieve the correct temperature.
- Lightweight and easy to use anywhere
- Ideal for sealing small, irregular or extra long packages
- Recommended for sealing cellophane, coated aluminum foil, kraft paper and other thicker materials.
Part #: KF-300CS -
SealerSales On-Pak Gen 3.0 Ultrasonic Clam Shell Sealer (OnPak)
- Easy to use. A beginner can use it like a stapler.
- Good design. Smart packing.
- Safe product. No more staples.
- Light to handle. One can weld quickly without lugging around a heavy unit.
- Sanitary without the anxiety of the rusting from staples.
Part #: OnPak -
SealerSales Hand Wheel Direct Heat Sealer w/ 5mm Seal Width (HWS-802HW)
- Great for irregular size packaging.
- Suited for sealing thicker materials.
- Equipped with a convenient rack to hold sealer when not in use.
- Temperature can be regulated from 150oF to 360oF with a quick turn of the knob.
- Temperature controller contains on/off switch with safety light.
Part #: HWS-802HW -
SealerSales FRM-1120LD Left Feed Vertical Dry Ink Coding Continuous Band Sealer (FRM-1120LD-LtoR)
- Adjustable height of both sealing head and conveyor belt providing maximum capacity of bag sizes.
- Durable stainless steel construction.
- Easy to operate - minimal operator training.
- Fast warm up time.
- Ideal for medium duty and heavy duty applications.
Part #: FRM-1120LD-LtoR
