Product listing: SealerSales Replacement Kit for KF-300HC Hand Impulse Sealer (RK-12HC-KF-300HC) to Scotch Dual Laminate Refill Cartridge for LS950 - 8 1/2 in x 100 ft (DL951)
-
SealerSales Replacement Kit for KF-300HC Hand Impulse Sealer (RK-12HC-KF-300HC)
- Kit Includes: 3mm wide heating element, (2) 1/2" PTFE adhesive, (2) 1 3/4" PTFE cover, and (1) blade.
- For Use With: 12" KF-Series Hand Sealer w/ 2mm Seal Width w/ Sliding Cutter
- Quantity: 1 Set
- Part Number: RK-12HC-KF-300HC
- Kit Includes: 3mm wide heating element, (2) 1/2" PTFE adhesive, (2) 1 3/4" PTFE cover, and (1) blade.
Part #: RK-12HC-KF-300HC -
SealerSales Replacement Kit for FS-800H Hand Impulse Sealer (RK-32H-FS-800H)
- Kit Includes: (2) 2.8mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
- For Use With: 32" FS-Series Long Hand Sealer w/ 2.8mm Seal Width
- Quantity: 1 Set
- Part Number: RK-32H-FS-800H
- Kit Includes: (2) 2.8mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
Part #: RK-32H-FS-800H -
SealerSales Replacement Kit for FS-300 Hand Impulse Sealer (RK-12HFS300)
- Kit Includes: (2) 3mm wide or round heating element (Your Choice), (2) 1/2" PTFE adhesive, and (2) 1 1/8" PTFE cover.
- For Use With: 12" FS-Series Hand Sealer w/ 3mm Seal Width
- Quantity: 1 Set
- Part Number: RK-12H-FS-300
- Kit Includes: (2) 3mm wide or round heating element (Your Choice), (2) 1/2" PTFE adhesive, and (2) 1 1/8" PTFE cover.
Part #: RK-12HFS300 -
SealerSales Portable PTFE Coated 8" Direct Heat Sealer with Temp Controller (KF-200CS)
- Equipped with an adjustable temperature controller allows the user to control the amount of heat needed for different type of materials.
- A 5-15 minute warm up time is required to achieve the correct temperature.
- Lightweight and easy to use anywhere
- Ideal for sealing small, irregular or extra long packages
- Recommended for sealing cellophane, coated aluminum foil, kraft paper and other thicker materials.
Part #: KF-200CS -
SealerSales Portable PTFE Coated 6" Direct Heat Sealer with Temp Controller (KF-150CSTA)
- 6" Direct Heat Sealer.
- Ideal for sealing cellophane, coated aluminum foil, Kraft paper, and other thicker materials.
- Two PTFE coated, serrated jaws.
- Seal Width - 5/8" or 15mm.
- Adjustable temperature controller for wider range of settings.
Part #: KF-150CSTA -
SealerSales Hand Wheel Direct Heat Sealer w/ 10mm Seal Width (HWS-803HW)
- Great for irregular size packaging.
- Suited for sealing thicker materials.
- Equipped with a convenient rack to hold sealer when not in use.
- Temperature can be regulated from 150oF to 360oF with a quick turn of the knob.
- Temperature controller contains on/off switch with safety light.
Part #: HWS-803HW -
SealerSales FRM-1120LD Left Feed Vertical Dry Ink Coding Continuous Band Sealer (FRM-1120LD-LtoR)
- Adjustable height of both sealing head and conveyor belt providing maximum capacity of bag sizes.
- Durable stainless steel construction.
- Easy to operate - minimal operator training.
- Fast warm up time.
- Ideal for medium duty and heavy duty applications.
Part #: FRM-1120LD-LtoR -
SealerSales Electromagnetic Manual Induction Sealer (DGYF-s500A)
- Hand held operation w/ thumb switch.
- Easy to operate - minimal operator training.
- Sealing time digital display (seconds and tenth of seconds).
- Self-protection from overheating.
- Suits small and medium workload or as a backup to continuous systems.
Part #: DGYF-s500A -
SealerSales 8" Shrink Wrapping Starter Kit w/ 6" x 11" VHS Shrink Bags (SWK-8-04V)
- Starter sets come complete with a 8" hand sealer (FS) - FS-200rnd, heat gun (HG-1), and 500pcs 6" x 11" VHS shrink bags.
- Shrink wrapping is easy. There are three steps involved in shrink packaging:
- Insert the item between the fold of film or into a shrink bag.
- Use a sealer to cut off the excess film and seal by lowering the sealing bar of the sealer.
- Shrink the film on all sides with heat gun or shrink tunnel.
Part #: SWK-8-04V -
SealerSales 8" Portable Double Impulse Sealer w/ 5mm Seal Width (FKR-200A)
- 8" sealing length and 5mm seal width
- Lightweight & easy to operate.
- Impulse heat w/ timer.
- Double impulse sealing.
- Recommended for poly materials such as polyethylene, polypropylene, PVC, PE laminated paper, and aluminum foil.
Part #: FKR-200A -
SealerSales 7" x 12" Clear Stand Up Pouches - 250pk (STP-16Z-400-B)
- Clear multi layer barrier film PET/LLDPE.
- Elegantly maximize shelf space over traditional packaging such as boxes and cartons.
- Minimize costs of freight and warehousing.
- Feature a resealable zip lock with tear notch for easy opening, and meet FDA regulations for food use.
- Ideal for packing dry goods such as cookies, nuts, candies, etc.
Part #: STP-16Z-400-B -
SealerSales 6.5" x 10.5" Clear Stand Up Pouches - 250pk (STP-12Z-400-B)
- Clear multi layer barrier film PET/LLDPE.
- Elegantly maximize shelf space over traditional packaging such as boxes and cartons.
- Minimize costs of freight and warehousing.
- Feature a resealable zip lock with tear notch for easy opening, and meet FDA regulations for food use.
- Ideal for packing dry goods such as cookies, nuts, candies, etc.
Part #: STP-12Z-400-B -
SealerSales 40" Long Hand Impulse Sealer w/ Sliding Cutter (WN-1000HC)
- Longer seal lengths for specialized sealing needs.
- No-warm up time.
- Heavy duty construction.
- Available with cutter unit.
- Manufacturer's replacement kit includes 2 elements and 1 blade if cutter unit is ordered.
Part #: WN-1000HC -
SealerSales 3/8" Heavy Duty Poly/Paper Bag Sealer with Trimmer (ND-2333)
- Heavy Duty Cast Aluminum Body.
- Sealing Head Adjustable for Pitch for Operator Comfort.
- Easily Replaceable Parts.
- Heavy Weighted Base.
- Trimmer for Clean Bag Appearance.
Part #: ND-2333 -
SealerSales 2.6" x 3.6" BOPP Clear Poly Lip-N-Tape Resealable Bags - 500pk (RB-25-35-160-A)
- Cost effective.
- High clarity - clear as glass cell-style bags.
- Meets FDA specifications for direct food contact.
- Peel off strip. Fold with ease. No heat sealing needed.
- Archival safe.
Part #: RB-25-35-160-A -
SealerSales 2.2mil 10" x 16" Shrink Bags for Meat and Cheese - 500pk (MSB-1016-500)
- High clarity - co-extruded, multi-layered construction.
- Meets FDA specifications for direct food contact.
- Ideal for meat or cheese shrink wrapping.
- Thickness: 2.2mil.
- Size: 10" x 16"
Part #: MSB-1016-500 -
SealerSales 16" Shrink Wrapping Starter Kit w/ 6" x 11" VHS Shrink Bags (SWK-16-04V)
- Starter sets come complete with a 16" hand sealer (FS) - FS-200rnd, heat gun (HG-1), and 500pcs 6" x 11" VHS shrink bags.
- Shrink wrapping is easy. There are three steps involved in shrink packaging:
- Insert the item between the fold of film or into a shrink bag.
- Use a sealer to cut off the excess film and seal by lowering the sealing bar of the sealer.
- Shrink the film on all sides with heat gun or shrink tunnel.
Part #: SWK-16-04V -
SealerSales 16" Portable Double Impulse Sealer w/ 5mm Seal Width (FKR-400A)
- 16" sealing length and 5mm seal width
- Lightweight & easy to operate.
- Impulse heat w/ timer.
- Double impulse sealing.
- Recommended for poly materials such as polyethylene, polypropylene, PVC, PE laminated paper, and aluminum foil.
Part #: FKR-400A -
SealerSales 16" Hand Impulse Sealer w/ 2.6mm Seal Width (KF-400H)
- Seals poly bags and other thermoplastic materials quickly and efficiently
- Plug-in electronic timer for variable control.
- All metal construction.
- No warm-up time.
- Round wire option available for seal and cut.
Part #: KF-400H -
SealerSales 10" Portable Direct Heat Wand Sealer (WT-250)
- Ideal for sealing irregular packages.
- 10" heated bar.
- Economically priced unit.
- Optional 12" working mat available.
- Easy to operate: Depending on the material, allow 5-15 minutes of warm up time for the sealer to reached the desired temperature.
Part #: WT-250 -
SEAL Easy Dot 4mil White Matte 54" x 164' Removable Adhesive Print Media (SED6030349)
- Innovative new product that will save time and money when creating and installing wall, window and trade show graphics.
- Ease of installation is the special dot patterned adhesive which creates air channels that allow for a bubble and wrinkle free installation.
- No special tools are needed - not even a squeegee.
- Also available in frosted clear finish.
- Ideal for trade show panels, POP and retail signage, window graphics, glass office partitions and much more.
Part #: SED6030349 -
SEAL 6mil Jet Guard Deep Crystal Heat-Activated Laminating Film (SPJG-6DCHALF)
- Features a uniform crystal texture that is durable and scratch resistant.
- Creates a finish that reduces glare from reflected light.
- Used in conjunction with SEAL LightShield.
- Provides an ideal non-reflective.
- Scratch resistant finishing solution that hides finger prints and other blemishes that may occur due to heavy use and handling.
Part #: SPJG-6DCHALF -
SEAL 51" x 150' 3mil PrintGuard UV Satin Matte Heat-Activated Laminating Film (SPGUV2274)
- Low-reflecting finish virtually eliminates glare while protecting prints from fading and handling.
- Offers UV protection and is an excellent choice for wall mounted displays.
- Constructed of a thin vinyl based film.
- Low activation temperature (185-195° F) solvent adhesive for maximum flexibility and conforming properties.
- Can be applied with any SEAL multi-temperature roller laminator.
Part #: SPGUV2274 -
SEAL 38" x 150' 3mil PrintGuard UV Luster Heat-Activated Laminating Film (SPGUV1315-3)
- Semi-gloss finish to make bright colors ‘pop’ off the page, with rich blacks and an increased color gamut.
- Constructed of a thin vinyl based film.
- Low activation temperature (185-195° F) solvent adhesive for maximum flexibility and conforming properties.
- Offers excellent UV protection.
- ideal for use on a wide range of medias and display applications.
Part #: SPGUV1315-3 -
SEAL 38" x 15' 3.5mil Print Shield Standard UV Gloss Pressure-Sensitive Laminating Film (SPS62201)
- Premium-grade vinyl with an advanced water-based acrylic adhesive technology.
- Delivers reduced silvering and extended outdoor durability.
- Offers affordable protection against harmful UV rays, dirt and abrasion.
- Extend the life of your universal indoor applications for up to five years and outdoor applications for up to three years.
- Gloss finish and comes with a single paper release liner.
Part #: SPS62201 -
SEAL 38" x 15' 1mil Gudy Window Pressure-Sensitive Mounting Adhesive (SGW62080)
- Water-based mounting adhesive that can be applied to the face of a graphic and then face-mounted on interior windows.
- Permanent adhesive on one side and a removable adhesive on the other.
- Ideal for bubble-free manual applications.
- Can be easily removed without residue - perfect for store front promotions.
- Get 1 roll on every order.
Part #: SGW62080 -
Scotch Thermal Laminator w/ 20 Letter Size Laminating Pouches (TL902VP)
- Maximum Document Size: 9" Wide
- Maximum Document Thickness: 5 mil
- Adjustability Features: 2 Temperature Settings
- Electric/Manual/Battery: Electric
- For Use With: Scotch Laminating Pouches
Part #: TL902VP -
Scotch Heat-Free 9-Inch Laminating Machine (LS960)
- Maximum Document Size: 8.5" Wide
- Maximum Document Thickness: 9.2 mil
- Electric/Manual/Battery: Manual
- For Use With: 1.7 to 10 mil Roll Film;DL961
- Width: 15 7/8 inches
Part #: LS960 -
Scotch Heat-Free 12-Inch Laminating Machine (LS1000)
- Maximum Document Size: 12" Wide
- Maximum Document Thickness: 9.2 mil
- Adjustability Features: Laminate 2 Sides, Or 1 Side W/Permanent Adhesive On Other
- Electric/Manual/Battery: Manual
- For Use With: Laminate Artwork;Laminate Banners;Laminate Maps;Laminate Menus;Laminate Signs
Part #: LS1000 -
Scotch Dual Laminate Refill Cartridge for LS950 - 8 1/2 in x 100 ft (DL951)
- Laminator Supply Type: Cartridge
- Length: 100 ft
- Width: 8 1/2 inches
- Thickness/Gauge: 5.6 mil
- Finish: Standard Gloss
Part #: DL951