Product listing: Logan Foam Board Hole Drill by FoamWerks (WD8011) to Lassco Wizer Cornerounder CR-60 1-1/2" Radius Table Assembly (60112TA)
-
Logan Foam Board Hole Drill by FoamWerks (WD8011)
- Three interchangeable quick-change drill tips included.
- Includes 3/4", 1/2" and 0.28" (7mm, 12.7mm, 19mm diameters.
- Works with 3/16"(5mm) foam board.
- Feature quick change blades and ergonomic designs.
- 90 Days Warranty
Part #: WD8011 -
Logan Foam Board Free Style Cutter by FoamWerks (WB6020)
- Easy to use, just insert the blade into the board and push to follow the desired shape.
- Features ergonomic handle, on-board blade storage compartment, blade safety shield and two blades.
- The Freestyle Cutter works with 3/16" (5mm) foam board.
- Use replacement blades WB-5 or WB-20.
- 90 Days Warranty
Part #: WB6020 -
Logan Flexible Point Strips for F500-2 Dual Drive Elite (600/Pk) - 1 Pack (F53-600)
- These points can be bent back after being inserted into the frame for easy changing of frame contents.
- Fits logan dual driver models f500-1, f500-2.
- Flexipoint refill.
- Includes 600 points per pack. Get 1 pack on every order
- These points can be bent back after being inserted into the frame for easy changing of frame contents.
Part #: F53-600 -
Logan Flexible Point Strips for F500-2 Dual Drive Elite (2500/Pk) - 1 Pack (F55-2500)
- These points can be bent back after being inserted into the frame for easy changing of frame contents.
- Fits logan dual driver models f500-1, f500-2.
- Flexipoint refill.
- Quantity: 1 pack. Includes 2500 points per pack.
- These points can be bent back after being inserted into the frame for easy changing of frame contents.
Part #: F55-2500 -
Logan F502 Frame Backing Kit (LGNF502)
- Includes: 30' x 30" Roll of Dust Cover Paper, 20' of 43lb coated picture framing wire, 6 pcs Saw Tooth Hanger, 24 pcs felt bumpers, 24 pcs D-Rings with screws, one roll 36yd ATG tape, F60 LOGAN Dust Cover Trimmer with two pcs #270 blade and Fully Illustrated Instruction.
- Use the ATG tape to apply dust cover paper to the back of the frame.
- Professionally trim it to size using the F60 Dust Cover Trimmer.
- Install saw tooth hanger or D-rings with screws provided.
- Tie the wire and apply the felt bumpers.
Part #: LGNF502 -
Logan F500-3 Deluxe Frame Finishing Kit (LGNF500-3)
- Secure the artwork and backing into the frame with the Dual Drive Elite.
- Apply the dust cover paper using the supplied paper and ATG tape.
- Trim the excess with the Dust Cover Trimmer.
- Install the d-rings.
- Tie the hanging wire and apply felt bumpers and the art is ready for hanging.
Part #: LGNF500-3 -
Logan F300-4 Picture Framing Hobby Joiner (LGNF300-4)
- Recommended for use on soft wood moulding only.
- Requires hammer to drive v-nails (hammer not included).
- Includes the F49 Clamp.
- 4 oz. bottle of wood glue.
- 100 pcs 3/8" softwood v-nails.
Part #: LGNF300-4 -
Logan F300-2 Picture Framing Pro Joiner (LGNF300-2)
- V-Nail alignment pins.
- A djustable v-nail spacing guide and settings .
- Drives all v-nail sizes and can be used for stacking v-nails .
- Can be used on hard or soft wood .
- Clamp will accept moulding up to 2 1/2" (6cm) width .
Part #: LGNF300-2 -
Logan COS-Tools V-Groove Cutter (XTC2001)
- Features include adjustable blade depth, quick change blade clips, magnetic blade slot, on-board blade storage drawer and five blades.
- Cuts V-grooves in suitable Cosplay materials to perfection
- Use with FoamWerks Channel Rail, Logan Adapt-A-Rule or Team System.
- Use replacement blades WC-5 or WC-20.
- 90 Days Warranty
Part #: XTC2001 -
Logan Compact Elite 32" Mat Cutter from Graphics (350-1)
- 32" (81.3cm) capacity
- Bevel and straight cutting heads
- Parallel mat guide
- Hinged guide rail with production stops
- Squaring bar
Part #: 350-1 -
Logan Compact Classic 32" Mat Cutter from Graphics (301-1)
- 32" (81.3cm) capacity
- Bevel cutting head and mat knife for straight cuts
- Parallel mat guide
- Spring loaded guide rail
- Built-in carry handle in box
Part #: 301-1 -
Logan Air-Matic Dual Drive Point Driver (F500-4)
- Designed to quickly drive either rigid or flexible points pneumatically using a common air compressor at 52 psi.
- Used in picture framing for securing glazing, mounted art and backing material into wood frame moulding.
- Fast repeat firing for high production framing.
- Approximately 300 point magazine capacity.
- Includes 100 rigid points and 100 flex points
Part #: F500-4 -
Logan Adapt-A-Rule 40" Guiderail (LGN540)
- Size: 40" (101cm)
- Includes a non-slip rubberized base and US or metric ruled guides.
- Upgrade kit including nylon guides and screws.
- Compatible with Handheld Mat Cutter models 2000 Push Style or 4000 Deluxe Pull Style, Straight Cutter, Glass Cutter, or Mat Knife.
- Size: 40" (101cm)
Part #: LGN540 -
Logan Adapt-A-Rule 24" Guiderail (LGN524)
- Size: 24" (61cm)
- Includes a non-slip rubberized base and US or metric ruled guides.
- Upgrade kit including nylon guides and screws.
- Compatible with Handheld Mat Cutter models 2000 Push Style or 4000 Deluxe Pull Style, Straight Cutter, Glass Cutter, or Mat Knife.
- Size: 24" (61cm)
Part #: LGN524 -
Logan Acrylic Plastic Cutter from Graphics - 709-1 (LGN709-1)
- Hand held cutting tool for cutting plastic & acrylic sheets.
- Inexpensive & handy for quick sizing in general framing.
- Use in conjunction with suitable straight edge or most Logan equipment (including Team System Plus, Compact, Artist and Simplex series).
- Features a fold back blade and can be used with most Logan board mount mat cutters or any suitable straight edge.
- Hand held cutting tool for cutting plastic & acrylic sheets.
Part #: LGN709-1 -
Logan 40" Team System Plus Mat Cutter - 440-1 (LGN440-1)
- Size: 40" (101cm)
- Includes a 302-1 Logan Push Style Bevel Mat Cutter for accurate, high quality mat cutting plus a three depth position mat knife with a slip lock depth.
- Has a non-slip rubberized base, US or metric ruled straight edge, and a Logan Handheld Mat Cutter.
- Uses Logan 270 blade.
- Can also be used with Logan Glass Cutter or Straight Cutter.
Part #: LGN440-1 -
Lithco PVC 100 Gauge 16" X 1500' Centerfold Shrink Film (MIS-PVC16100)
- Type: PVC Shrink Film
- Size (W x L): 16" X 1500''
- Gauge: 100
- Part Number: MIS-PVC16100
- A balance oriented film with equal shrinkage in both machine and transverse directions.
Part #: MIS-PVC16100 -
Lithco Medical Infrared Thermometer (MIS-MIRT)
- Non-contact reading
- Measuring distance: 1"-2" (3-5cm)
- Selectable Body or Surface in F° or C°
- Measurement range: 89.6°F-109.4°F (32.0-43C°)
- Measurement accuracy: within 95°F–107.6°F (35.0C° - 42C°) +/- 0.4°F (0.2C°)
Part #: MIS-MIRT -
Light Gray Linen 8.5" x 11" Covers With Windows - 100 Sets (MYLC8.5X11LGYW)
- Cover Type: Linen Weave Paper
- Cover Thickness: 80lb Cover
- Cover Size: 8.5" x 11" Letter Size
- Color: Light Gray
- Corners: Square
Part #: MYLC8.5X11LGYW -
Light Gray A4 Size Regency Leatherette Vinyl Covers - 100pk (MYRC8.3X11.7LG)
- Cover Type: Regency/Composition
- Cover Thickness: 15pt
- Cover Size: A4 (210mm x 297 mm)
- Color: Light Gray
- Corners: Square
Part #: MYRC8.3X11.7LG -
Light Gray 35mil Sand Poly Binding Covers (MYMP35LGY)
- Cover Type: Sand Poly
- Cover Thickness: 35mil
- Cover Size: 8.5" x 5.5" - 11" x 17"
- Color: Light Gray
- Corners: Square (8.75" x 11.25" Oversize Have Round Corners)
Part #: MYMP35LGY -
Light Brown 23mil Sand Poly Binding Covers (MYMP23LBR)
- Cover Type: Sand Poly
- Cover Thickness: 23mil
- Cover Size: 8.5" x 5.5" - 11" x 17"
- Color: Light Brown
- Corners: Square (8.75" x 11.25" Oversize Have Round Corners)
Part #: MYMP23LBR -
Light Blue Linen 8.5" x 11" Letter Size Covers - 100pk (MYLC8.5X11LBL)
- Cover Type: Linen Weave Paper
- Cover Thickness: 80lb Cover
- Cover Size: 8.5" x 11" Letter Size
- Color: Light Blue
- Corners: Square
Part #: MYLC8.5X11LBL -
Legal Size Laminating Pouch Carrier 9" x 14.5" (AKLPCLEGAL)
- Compatible with all major brands of laminators on the market
- Coated stock helps ensure that laminating pouches do not stick inside the carriers.
- Pouch Carriers can easily be cut down for smaller pouches or custom sized pouches
- For LegalSize Laminating Pouches (9" x 14.5")
- Part Number: AKLPCLEGAL
Part #: AKLPCLEGAL -
Ledco Educator 25" School Laminator (9025100D)
- Preset lamination pressure and speed. Makes the machine easier to use and eliminates many possible sources of problems.
- Enclosed laminating and pull rollers. Helps you avoid time-consuming jams and wrap-arounds.
- Forced air cooling. Allows laminating with 3 and 5-mil films, as well as the 1.5 mil film often used by schools. Without a film cooling system, thicker films will warp and ripple because they are still hot and partly melted when they come out of the laminator.
- Fixed-position lamination rollers. Provides a stable platform for uniform roll pressure which provides the highest quality lamination available in a school laminator.
- Attached safety shield. The safety shield is fixed to the machine and is placed so that the operator will naturally put it in the guard position before laminating. The shield is made of clear polycarbonate so users can see their work and will not be tempted to try to laminate without the shield in its safe position.
Part #: 9025100D -
Lawson Pacemaker 69" III IV High Speed Steel Replacement Blade (JH-40200HSS)
- Type of Blade: High Speed Steel
- Dimensions (L x W x T): 83.000" x 5.000" x .496"
- Holes/Slots: 42H
- Hole Size: 1/2"-13
- Type of Blade: High Speed Steel
Part #: JH-40200HSS -
Lassco Wizer Hydrol HL Oil (1-1/2 Gallons) for Paper Drills (FMH-2030)
- Type: Hydraulic Paper Drill Press Oil
- Size: 1-1/2 Gallons
- Compatible With: Lassco Hydraulic Paper Drill Presses
- Part Number: FMH-2030
- Type: Hydraulic Paper Drill Press Oil
Part #: FMH-2030 -
Lassco Wizer Cornerounder Sign Corner Cutter (CR-60)
- The Model CR-60 is designed specifically for the sign industry
- Features a one ton press capacity
- Interchangeable tables, which allow for change of radii
- Four table sizes available (1/2", 3/4", 1", 1-1/2")
- Shear capacity of up to .080 half hard aluminum
Part #: CR-60 -
Lassco Wizer Cornerounder Pneumatic Corner Cutter (CR-50XP)
- The Model CR-50XP Corner Rounder floor model is for large operations.
- Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
- Comes with choice of a standard cutting unit (1/8", 1/4", 3/8", or 1/2") and can easily be adaptable for using large radii up to 1-1/2".
- Corner Rounder Weight 82 lbs.
- Designed to cut paper and plastic
Part #: CR-50XP -
Lassco Wizer Cornerounder CR-60 1-1/2" Radius Table Assembly (60112TA)
- Heavy duty construction
- Available in four sizes
- Radius: 1-1/2"
- Part Number: 60-112TA
- Heavy duty construction
Part #: 60112TA
