Product listing: Flipside 23" x 31" White Portfolio Cases - 10pk (FS-20090) to Filepecker FP-1B Manual Paper Hole Drill (MYFP1B)
-
Flipside 23" x 31" White Portfolio Cases - 10pk (FS-20090)
- Protect and transport artwork and other projects in lightweight and sturdy corrugated portfolios.
- Comes with easy-to-carry plastic handle on top edge.
- Front flap lifts up to gain access to contents and closes securely with hook and loop closures.
- White surface features a matte finish and accepts a range of craft materials easily to personalize.
- Measures 23" x 31" x 1.5" deep.
Part #: FS-20090 -
Flipside 22" x 28" Red/Green Two-Sided Corrugated Cardboard Project Sheets - 25pk (FS-26869)
- Ideal for presentations and projects that need more than poster board with color on 2 sides!
- Each sheet is red on one side and green on the other.
- Has a slightly glossy finish that easily accepts markers, crayons, paints and adhesives.
- Lightweight and rigid, corrugated sheets cut easily with a knife or razor.
- Perfect for signs, mounting photographs and artwork, poster making and more!
Part #: FS-26869 -
Flipside 22" x 28" Blue/Sky Blue Two-Sided Corrugated Cardboard Project Sheets - 25pk (FS-26566)
- Ideal for presentations and projects that need more than poster board with color on 2 sides!
- Each sheet is blue on one side and sky blue on the other.
- Has a slightly glossy finish that easily accepts markers, crayons, paints and adhesives.
- Lightweight and rigid, corrugated sheets cut easily with a knife or razor.
- Perfect for signs, mounting photographs and artwork, poster making and more!
Part #: FS-26566 -
Flipside 20" x 30" White Corrugated Cardboard Project Sheets - 25pk (FS-32300)
- Ideal for signs, mounting photographs and artwork, poster making and more!
- The bright white surface has a matte finish that easily accepts markers, crayons, paints and adhesives.
- Lightweight and rigid, corrugated sheets cut easily with a knife or razor.
- Back of board is brown kraft.
- Boards measure 20" x 30" x 3/8" thick.
Part #: FS-32300 -
Flipside 20" x 30" Neon Pink 3/16" Thick Foam Board Sheets - 25pk (FS-20370)
- Presentations and projects will be taken to a whole new level with foam core boards.
- The smooth, bright neon pink surface has a slightly glossy finish that easily accepts markers, crayons, paints and adhesives.
- Lightweight and rigid, foam board cuts easily with a knife or razor.
- Perfect for mounting photographs and artwork, 3-D modeling, signage, poster making and more!
- Boards measure 20" x 30" with 3/16" (5mm) thick, dense white polystyrene foam core and white on back of sheet.
Part #: FS-20370 -
Flipside 20" x 30" Black Corrugated Cardboard Project Sheets - 25pk (FS-32330)
- Ideal for signs, mounting photographs and artwork, poster making and more!
- The bold black surface has a slightly glossy finish that easily accepts markers, crayons, paints and adhesives.
- Lightweight and rigid, corrugated sheets cut easily with a knife or razor.
- Back of board is brown kraft.
- Boards measure 20" x 30" x 3/8" thick.
Part #: FS-32330 -
Flipside 18" x 48" 1-Ply Yellow Corrugated Project Boards - 24pk (FS-18490)
- Constructed from sturdy lightweight 1-ply corrugated fiberboard with overlapping side panels that make transporting the board easy.
- The smooth, yellow surface has a slightly glossy finish that easily accepts markers, crayons, paints and adhesives.
- Back of board is brown kraft.
- Measures 18" high x 48" wide overall—side panels measure 18" high x 12.75" wide and the center panel measures 18" high x 22.5" wide.
- Set of 24
Part #: FS-18490 -
Flipside 12" x 48" White Corrugated Plastic Study Carrels - 12pk (FS-19972-12)
- Made from durable, lightweight corrugated plastic.
- Rounded corners are safe for use with children.
- Can be used longer than our corrugated paper study carrels
- Pack of 12 Study Carrels
- Made from durable, lightweight corrugated plastic.
Part #: FS-19972-12 -
Flipside 12" x 18" Unframed Natural Cork Bulletin Boards - 12pk (FS-10082)
- Provides easy access to the important stuff of everyday life!
- Self-healing natural cork holds notes, lists, reminders of all sorts.
- Natural cork lends a sophisticated look to your message space.
- Rounded corners add style.
- Can be cut to size.
Part #: FS-10082 -
Flipside "Keep Hands Off Face" Blue 11" Round Non-Slip Floor Stickers - 5pk (FS-97080)
- Non-Slip Floor Stickers.
- Highly durable.
- Bright Colors.
- Removes easily with little or no residue.
- Works well on a variety of surfaces.
Part #: FS-97080 -
Flexible Hook Ski Sports Reel with Snap Closure Black - 25pk (2120-4001)
- Type: Flexible Hook Ski Sports Reels
- Reel Diameter: 1-3/4"
- Cord Length: 36 Inches
- Color: Black
- Attachment: Clear Vinyl Strap
Part #: 2120-4001 -
Fletcher-Terry Titan 80" Board Cutter Stand (Titan80Stand)
- Squaring arm to keep your materials square and secure.
- Material waste catcher to keep your shop clean.
- Locking wheels for easy mobility.
- Fits the Fletcher-Terry Titan 80" Board Cutter.
- Squaring arm to keep your materials square and secure.
Part #: Titan80Stand -
Fletcher-Terry Titan 80" Board Cutter (Fletcher-Titan80)
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
- Trimming feature for flexible vinyls, photo paper, and canvas.
- No need for two cutters dedicated to each function; saves on space and equipment investment.
- Engineered "green" strip gives you a visible cut line; no need for guesswork.
Part #: Fletcher-Titan80 -
Fletcher-Terry Titan 60" Board Cutter Stand (Titan60Stand)
- Material waste catcher to keep your shop clean.
- Locking wheels for easy mobility.
- Fits the Fletcher-Terry Titan 60" Board Cutter.
- Squaring arm to keep your materials square and secure.
- Material waste catcher to keep your shop clean.
Part #: Titan60Stand -
Fletcher-Terry Titan 60" Board Cutter (Fletcher-Titan60)
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
- Trimming feature for flexible vinyls, photo paper, and canvas.
- No need for two cutters dedicated to each function; saves on space and equipment investment.
- Engineered "green" strip gives you a visible cut line; no need for guesswork.
Part #: Fletcher-Titan60 -
Fletcher-Terry Titan 120" Board Cutter (Fletcher-Titan120)
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
- Trimming feature for flexible vinyls, photo paper, and canvas.
- No need for two cutters dedicated to each function; saves on space and equipment investment.
- Engineered "green" strip gives you a visible cut line; no need for guesswork.
Part #: Fletcher-Titan120 -
Fletcher-Terry M-3000 Replacement Mat Cutting Blades for F3000 Cutter - 10/Tube (05-001)
- Product Type: Replacement Blades
- Compatible With: Fletcher F3000 Cutter
- Cutting Capacity (Matboard): up to 12 Ply
- Cutting Capacity (Foamboard and Card Board): up to 1/4" (6mm)
- Quantity: 10/Tube
Part #: 05-001 -
Fletcher-Terry Gemini Pro 60" Rail Cutter (GeminiPro60)
- Utilize table-mounted elevators to raise cutter above graphics for positioning cut line.
- Features sight line strip for cutting accuracy.
- No repositioning of the straight-edge required; allows you to line up the material for the entire length of the cut especially with large printed graphics or materials.
- Eliminate fatigue/injuries while working with large graphics
- Knife cutting blades are manufactured to Fletcher engineering specifications resulting in:
Part #: GeminiPro60 -
Fletcher-Terry Gemini Pro 40" Rail Cutter (GeminiPro40)
- Utilize table-mounted elevators to raise cutter above graphics for positioning cut line.
- Features sight line strip for cutting accuracy.
- No repositioning of the straight-edge required; allows you to line up the material for the entire length of the cut especially with large printed graphics or materials.
- Eliminate fatigue/injuries while working with large graphics
- Knife cutting blades are manufactured to Fletcher engineering specifications resulting in:
Part #: GeminiPro40 -
Fletcher-Terry Gemini Pro 120" Rail Cutter (GeminiPro120)
- Utilize table-mounted elevators to raise cutter above graphics for positioning cut line.
- Features sight line strip for cutting accuracy.
- No repositioning of the straight-edge required; allows you to line up the material for the entire length of the cut especially with large printed graphics or materials.
- Eliminate fatigue/injuries while working with large graphics
- Knife cutting blades are manufactured to Fletcher engineering specifications resulting in:
Part #: GeminiPro120 -
Fletcher-Terry F3100 PVC Cutting Blades - 10/Tube (05-711)
- Type: Cutting Blades for PVC materials
- For Use With: Fletcher's 3100 Double Blade Holder (P/N 12-225)
- Quantity: 10 Blades/tube.
- Part Number: 05-711
- Type: Cutting Blades for PVC materials
Part #: 05-711 -
Fletcher-Terry F3100 63" Multi-Material Cutter (Fletcher-F3100)
- Wall-Mounted (stand accessory available seperately)
- Cuts foamboard, PVC and corrugated plastics up to 1/2" (12.7mm) thick
- Cuts hardboard (MDF) up to 3/32" (2.4mm)
- Scores glass and plastic up to 1/4" (6.35mm)
- Spring loaded cutting head assembly with interchangeable pillar post.
Part #: Fletcher-F3100 -
Fletcher-Terry F3000 60" Multi-Material Cutter (04-712)
- Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
- Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
- Material Clamping System: Patented lever-type clamping system that secures in place various substrate heights up to 60" (152cm) to prevent buckling and shifting of material during the cutting process.
- Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.
- Wall mounted or free-standing.
Part #: 04-712 -
Fletcher-Terry F3000 48" Multi-Material Cutter (04-711)
- Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
- Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
- Material Clamping System: Patented lever-type clamping system that secures in place various substrate heights up to 48" (158cm) to prevent buckling and shifting of material during the cutting process.
- Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.
- Wall mounted or free-standing.
Part #: 04-711 -
Fletcher-Terry F-60 62" Semi-Rigid Flexible Substrate Cutter (04-722)
- Features a unique plastic knife blade cartridge allowing quick and safe blade changes.
- Cutting head equipped with "Lock & Cut" feature - cutting head lowers and locks during cutting process.
- Lock down pressure clamp - securely holds material in place while cutting ridge substrates.
- Table-top or wall-mounted cutting.
- Cutting head unit equipped with "Lock & Cut" feature - cutting head lowers and locks during cutting process.
Part #: 04-722 -
Fletcher-Terry 60" 2200 Mat Cutter (04-682)
- Cuts 8-ply mat, gator, and form board.
- Maximum Material Cutting Thickness: 1/2" (13mm).
- Three different blades are available: .012", .015" and 90 °blade.
- Sight Gage on the cutting head provides precise control of over/under cuts when using pencil lines on the back of the mat.
- Cutting blades are held by removable magazines – permits quick, safe, interchangeability and cutting depth adjustments.
Part #: 04-682 -
Fletcher-Terry 2200 .015 Mat Blades - 100/box (05015)
- Type: Mat Blades
- For Use With: 2200 Matt Cutters
- Size: .015
- Quantity: 100 blades/box
- Part Number: 05-015
Part #: 05015 -
Filepecker FP-1XLS 5/16" Paper Punch Bit (MYFPPLS516)
- Sheet Capacity: Up to 300 sheet
- Size (Diameter): 5/16"
- Designed for the FP-1XLS Paper Hole Punch Machine
- Sheet Capacity: Up to 300 sheet
- Size (Diameter): 5/16"
Part #: MYFPPLS516 -
Filepecker FP-1XLS 3/8" Paper Punch Bit (MYFPPLS38)
- Sheet Capacity: Up to 300 sheet
- Size (Diameter): 3/8"
- Designed for the FP-1XLS Paper Hole Punch Machine
- Sheet Capacity: Up to 300 sheet
- Size (Diameter): 3/8"
Part #: MYFPPLS38 -
Filepecker FP-1B Manual Paper Hole Drill (MYFP1B)
- Simple and easy multi-hole punching process by sliding the table
- Punch up to an impressive 300 sheet of document at one time
- Very little pressure needed to operate
- Features a sliding table with adjustable stops providing an efficient work environment
- Heavy-duty die-cast aluminium construction
Part #: MYFP1B