Product listing: Challenge Paddy Wagon Heavy Duty Padding Press - Equipment (CH-PADDYWAGON) to Cardinal Multi-Color Table of Contents/Month Tab Divider 24pk - CB (CRD-60318)

Page
View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. Challenge Paddy Wagon Heavy Duty Padding Press - Equipment (CH-PADDYWAGON)


      High Capacity: Holds up to 31" of paper for production padding environments
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
      Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
      Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
      Portable Heavy Duty Casters: Allow you to move the Paddy Wagon to your job and store the wagon when not in use
      Welded Tubular Steel Construction: Provides durability and longevitivity in even the most demanding production environments
      Products Working for You: The Paddy Wagon is just one in the line of Challenge products engineered to make your job easier.
      High Capacity: Holds up to 31" of paper for production padding environments
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Tilt & Load:With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square.
      Clamp:After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws. ßÃЊ“Á
    Part #: CH-PADDYWAGON

    $708.00

  2. Challenge Mini Padder Portable Padding Press - Equipment (CH-MINIPADDER)


      Portable, Compact & Economical
      Load up to 5" high and up to 11" x 17" sized sheets
      The Mini-Padder is just one in the line of Challenge products engineered to make your job easier.
      Maximum Lift Height 5" / 12.7 cm
      Maximum Lift Width: 17-1/2" / 44 cm
      Lift Depth: 4" to 11+" / 10 cm to 28+ cm
      Capacity: 1250 Sheets of 20lb paper ßÃЊ“Á
    Part #: CH-MINIPADDER

    $168.74

  3. Challenge iJog Paper Jogger with Air Assist - Equipment (CH-IJOGAIR)


      Robust, electro-mechanical jogging action
      Front-side loading
      Foot pedal control
      Adjustable air flow - dial from zero to 112 CFM
      Two jogging speeds
      Three operating modes - air off all the time, air on all the time, or air on for an adjustable length of time during the jogging action
      Rugged, heavy duty construction
      Front-side loading
      Foot pedal control
      Two jogging speeds
      Three operating modes - air off all the time, air on all the time, or air on for an adjustable length of time during the jogging action ßÃЊ“Á
    Part #: CH-IJOGAIR

    $1832.50

  4. Challenge Handy-Jog Paper Jogger with Standard Tray - Equipment (CH-HANDYJOGST)


      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action
      Quiet operation
      Maintenance free drive mechanism
      Optional "Instant On" footswitch
      UL Listed
      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action ßÃЊ“Á
    Part #: CH-HANDYJOGST

    $515.00

  5. Challenge Handy-Jog Paper Jogger with LargeTray - Equipment (CH-HANDYJOGXL)


      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action
      Quiet operation
      Maintenance free drive mechanism
      Optional "Instant On" footswitch
      UL Listed
      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action ßÃЊ“Á
    Part #: CH-HANDYJOGXL

    $540.00

  6. Challenge Handy-Drill Single Spindle Paper Drill - Equipment (CH-HANDYDRILL)


      2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
      Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
      Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced.
      Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting.
      Adjustable Margins: Thumb screws easily lock the backguage to the drill table. To adjust the margins, simply loosen the screws and line-up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to 2.5" margin from the edge of the paper.
      Included : (1) 1/4"/6.4 mm & (1) 5/16"/7.9 mm 2-1/2" hollow drill bits, (2) 1-1/2"/38 mm wood drilling blocks, (1) trip backgauge, (1) manual & (1) tool kit
      2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
      Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
      Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches.
      Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting. ßÃЊ“Á
    Part #: CH-HANDYDRILL

    $1445.00

  7. Challenge Handy Padder Portable Padding Press - Equipment (CH-HANDYPADDER)


      Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
      Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
      Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
      Turn & Pad: Turn the table around and remove the plate for complete access to your padding.
      Products Working for You: The Handy-Padder is just one in the line of Challenge products engineered to make your job easier.
      Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price.
      Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. ßÃЊ“Á
    Part #: CH-HANDYPADDER

    $400.70

  8. Challenge Handy Cart Paper Stock Truck - Equipment (CH-HANDYCART)


      Mobility & Control: Four 5" hard rubber swivel casters and four handles make your Handy-Cart easy to control and easy to roll from place to place.
      Keeping Stock Square : Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
      Solid Construction - Shipped to you in one piece, the HANDY-CART is constructed of heavy gauge, welded steel.
      Products Working for You: The Handy-Cart is another great product value from Challenge! All of our products are engineered to make your job easier.
      Full-size lower shelf with a lip to prevent items from sliding off.
      Holds (4) piles of 11" x 17"/28 x 43 cm Stock up to 21" tall
      500 lb/227 kg Total Capacity
      Mobility & Control: Four 5" hard rubber swivel casters and four handles make your Handy-Cart easy to control and easy to roll from place to place.
      Keeping Stock Square: Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
      Solid Construction - Shipped to you in one piece, the HANDY-CART is constructed of heavy gauge, welded steel.
      Products Working for You: The Handy-Cart is another great product value from Challenge! All of our products are engineered to make your job easier. ßÃЊ“Á
    Part #: CH-HANDYCART

    $563.50

  9. Challenge CMT 130 High Speed Steel Replacement Blade (JH-31480HSS)

      Type of Blade: High Speed Steel Dimensions (L x W x T): 17.500inchx2.750inch x .375inch Holes/Slots: 7H Hole Size: 3/8inch -16
    Part #: JH-31480HSS

    $296.79

  10. Challenge 34-1/2" 34" 35-1/2" Diamond Replacement Blade (JH-34100)

      Compatible Models: Challenge 34 1/2inch , 34inch , 35 1/2inch Material: Standard Inlay Holes: 14 Length: 41inch With: 4.5inch Thickness: 0.438inch Notes: Diamond Part Number: JH-34100 , 34100 , KN34100
    Part #: JH-34100

    $360.39

  11. Challenge 305H 305M Replacement Blade (JH-33300)

      Compatible Models: Challenge 305H, 305M Material: Standard Inlay Holes: 12 Length: 34.75inch With: 4inch Thickness: 0.375inch Notes: Part Number: JH-33300 , 33300 , KN33300
    Part #: JH-33300

    $196.09

  12. Challenge 305H 305M High Speed Steel Replacement Blade (JH-33300HSS)

      Compatible Models: Challenge 305H, 305M Material: High Speed Steel Holes: 12 Length: 34.75inch With: 4inch Thickness: 0.375inch Notes: Part Number: JH-33300HSS , 33300HSS , KN33300HSS
    Part #: JH-33300HSS

    $376.29

  13. Challenge 26-1/2" Cut 265 Pro Cut 265 Replacement Blade (JH-33110)

      Compatible Models: Challenge, Pro Cut 26 1/2inch Cut, 265, Pro Cut 265 Material: Standard Inlay Holes: 12 Length: 31.25inch With: 4inch Thickness: 0.375inch Notes: Diamond, 26 1/2inch Cut Part Number: JH-33110 , 33110 , KN33110
    Part #: JH-33110

    $222.59

  14. Challenge 230H Pro Cut 235 Replacement Blade (JH-32000)

      Compatible Models: Challenge, Pro Cut 230H, Pro Cut 235 Material: Standard Inlay Holes: 10 Length: 27inch With: 3.5inch Thickness: 0.375inch Notes: Part Number: JH-32000 , 32000 , KN32000
    Part #: JH-32000

    $190.79

  15. Challenge 20 Multi 2020 Titan 200 Replacement Blade (JH-31780)

      Compatible Models: Challenge, Multi 20, MULTI 2020, TITAN 200 Material: Standard Inlay Holes: 4 Length: 23.75inch Width: 3inch Thickness: 0.374inch Notes: Part Number: JH-31780 , 31780 , KN31780
    Part #: JH-31780

    $145.19

  16. Challenge 20 Multi 2020 Titan 200 High Speed Steel Blade - Replacement Blades (JH-31780HSS)

      Compatible Models: Challenge, Multi 20, MULTI 2020, TITAN 200 Material: High Speed Steel Holes: 4 Length: 23.75inch With: 3inch Thickness: 0.374inch Notes: Part Number: JH-31780HSS , 31780HSS , KN31780HSS
    Part #: JH-31780HSS

    $370.99

  17. Challenge 193H Replacement Blade (JH-31800)

      Compatible Models: Challenge 193H Material: Standard Inlay Holes: 8 Length: 24inch With: 3.5inch Thickness: 0.375inch Notes: Part Number: JH-31800 , 31800 , KN31800
    Part #: JH-31800

    $154.79

  18. Challenge 193 Diamond Replacement Blade (JH-31920)

      Compatible Models: Challenge 193 Material: Standard Inlay Holes: 8 Length: 24.5inch With: 4inch Thickness: 0.375inch Notes: Diamond Part Number: JH-31920 , 31920 , KN31920
    Part #: JH-31920

    $174.89

  19. Carl Extra Heavy Duty 300 Sheet 3-Hole Punch - XHC-3300 (CUI63300)

      Color: Gray Paper Punch Capacity: 300Sheets Number of Punch Holes: 3Hole Diamter: 9/32inch Operating Method: Manual Quantity : 1 Model Number: XHC-3300 Product Number: CUI63300
    Part #: CUI63300

    $231.95

  20. Carl Extra Heavy Duty 300 Sheet 2-Hole Punch - XHC-2300N - 3-Hole Punches (CUI62300)

      Color: Gray Paper Punch Capacity: 300Sheets Number of Punch Holes: 2Hole Diamter: 1/4inch Operating Method: Manual Quantity : 1 Model Number: XHC-2300N Product Number: CUI62300
    Part #: CUI62300

    $210.26

  21. Carl Extra Heavy Duty 150 Sheet 3-Hole Punch - XHC-150N (CUI63150)

      Color: Gray Paper Punch Capacity: 150Sheets Number of Punch Holes: 3Hole Diamter: 9/32inch Operating Method: Manual Quantity : 1 Model Number: XHC-150N Product Number: CUI63150
    Part #: CUI63150

    $125.07

  22. Carl Extra Heavy Duty 100 Sheet 2-Hole Punch - XHC-2100N - 3-Hole Punches (CUI62100)

      Color: Gray Paper Punch Capacity: 100Sheets Number of Punch Holes: 2Hole Diamter: 1/4inch Operating Method: Manual Quantity : 1 Model Number: XHC-2100N Product Number: CUI62100
    Part #: CUI62100

    $77.68

  23. Carl 25" Heavy Duty 20 Sheet Rotary Trimmer - DC-250 (CUI12250)


      Cutting Capacity (# of sheets per pass): 20
      Cutting Length (inches): 25
      Number of Blades Included: 1 Blade Included
      Color: Gray
      Qty Per Pack: 1
      Model Number: DC-250
      Product Number: CUI12250
      Warranty: Limited Lifetime Warranty (excludes blade and cutting mats)
      Cutting Length (inches): 25
      Cut Type: Rotary
      Cutting Capacity (# of sheets per pass): 20
      Paper Clamp: No ßÃЊ“Á
    Part #: CUI12250

    $144.38

  24. Carl 18" Heavy Duty 36 Sheet Rotary Trimmer - DC-238N (CUI12238)


      Cutting Capacity (# of sheets per pass): 36
      Cutting Length (inches): 18
      Number of Blades Included: 1 Blade Included
      Color: Black
      Qty Per Pack: 1
      Model Number: DC-238N
      Product Number: CUI12238
      Warranty: Limited Lifetime Warranty (excludes blade and cutting mats)
      Cutting Length (inches): 18
      Cut Type: Rotary
      Cutting Capacity (# of sheets per pass): 36
      Paper Clamp: No ßÃЊ“Á
    Part #: CUI12238

    $110.07

  25. Carl 15" Heavy Duty 36 Sheet Rotary Trimmer - DC-220N (CUI12220)


      Cutting Capacity (# of sheets per pass): 36
      Cutting Length (inches): 15
      Number of Blades Included: 1 Blade Included
      Color: Black
      Qty Per Pack: 1
      Model Number: DC-220N
      Product Number: CUI12220
      Warranty: Limited Lifetime Warranty (excludes blade and cutting mats)
      Cutting Length (inches): 15
      Cut Type: Rotary
      Cutting Capacity (# of sheets per pass): 36
      Paper Clamp: No ßÃЊ“Á
    Part #: CUI12220

    $98.89

  26. Carl 12" Heavy Duty 36 Sheet Rotary Trimmer - DC-210N (CUI12210)


      Cutting Capacity (# of sheets per pass): 36
      Cutting Length (inches): 12
      Number of Blades Included: 1 Blade Included
      Color: Black
      Qty Per Pack: 1
      Model Number: DC-210N
      Product Number: CUI12210
      Warranty: Limited Lifetime Warranty (excludes blade and cutting mats)
      Cutting Length (inches): 12
      Cut Type: Rotary
      Cutting Capacity (# of sheets per pass): 36
      Paper Clamp: No ßÃЊ“Á
    Part #: CUI12210

    $89.33

  27. Cardinal White Printable Table of Contents/15 Tab Divider 24 sets - CB (CRD-61513)

      Color(s): White Quantity: 1 set per pack/24packs per box Size: 9inchx11inch Post-Consumer Recycled Content Percent : 0% Total Recycled Content Percent : 0% Material(s): Paper Part Number: CRD-61513
    Part #: CRD-61513

    $103.93

  28. Cardinal White Printable Table of Contents/10 Tab Divider 24 sets - CB (CRD-61013)

      Color(s): White Quantity: 1 set per pack/24packs per box Size: 9inchx11inch Post-Consumer Recycled Content Percent : 0% Total Recycled Content Percent : 0% Material(s): Paper Part Number: CRD-61013
    Part #: CRD-61013

    $76.99

  29. Cardinal White Printable Table of Contents/1-31 Tab Divider 12 sets - CB (CRD-60113)

      Color(s): White Quantity: 1 set per pack/12packs per box Size: 9inchx11inch Post-Consumer Recycled Content Percent : 0% Total Recycled Content Percent : 0% Material(s): Paper Part Number: CRD-60113
    Part #: CRD-60113

    $71.85

  30. Cardinal Multi-Color Table of Contents/Month Tab Divider 24pk - CB (CRD-60318)

      Color(s): White Paper/Multi-Color Tabs Quantity: 1 set per pack/24packs per box Size: 9inchx11inch Post-Consumer Recycled Content Percent : 0% Total Recycled Content Percent : 0% Material(s): Paper Part Number: CRD-60318
    Part #: CRD-60318

    $91.01

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   80