Product listing: Charles Leonard 1/2" Silver Aluminum Screw Posts - 100/Box (LEO-3703L) to Carl Corner Rounding Punch - CP6A (CUI76001)

Page
View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. Charles Leonard 1/2" Silver Aluminum Screw Posts - 100/Box (LEO-3703L)

    • Aluminum screw posts are nonrusting and made for binding papers into various types of covers.
    • Round flat heads for a neat appearance.
    • Size: 1/2 Inches
    • Quantity: 100 / Box.
    • Size: 1/2"
    Part #: LEO-3703L

    $16.74

  2. Challenge Titan 230 Replacement Blade - 42007 (JH-31930)

    • Type of Blade: Standard Inlay
    • Dimensions (L x W x T): 26.750" x 3.000" x .375"
    • Holes/Slots: 5H
    • Type of Blade: Standard Inlay
    • Dimensions (L x W x T): 26.750" x 3.000" x .375"
    Part #: JH-31930

    $180.19

  3. Challenge Titan 230 23" Hydraulic Programmable Paper Cutter (TITAN230PC)

    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    • Optional electronic clamp pressure adjustment.
    Part #: TITAN230PC

    $18295.00

  4. Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON)

    • High Capacity: Holds up to 31" of paper for production padding environments
    • Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
    • Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
    • Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
    • Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
    Part #: CH-PADDYWAGON

    $760.00

  5. Challenge JF Single Spindle Paper Drill (CH-JFPAPERDRILL)

    • Convenient Foot Pedal Operation
    • 2" Drilling Capacity: Drills up to 2" lifts of stock in a single stroke.
    • 13 Hollow Drill Bit Sizes: Hole sizes range from 1/8" to 1/2" diameters.
    • Auto - Trip Side Guide: For muliple hole patterns, the versatile backguage offers up to four adjustable stop locations (additonal adjustable stops sold separately). The auto-trip feature automatically releases the paper guide to advance to the next stop setting upon the completion of each stroke cycle.
    • Adjustable Margins: Thumb screws easily lock the backgauge to the drill table. To adjust your margins simply loosen the screws and line up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to a 4" margin from the edge of the paper.
    Part #: CH-JFPAPERDRILL

    $2450.00

  6. Challenge iJog Paper Jogger with Air Assist (CH-IJOGAIR)

    • Robust, electro-mechanical jogging action
    • Front-side loading
    • Foot pedal control
    • Adjustable air flow - dial from zero to 112 CFM
    • Two jogging speeds
    Part #: CH-IJOGAIR

    $1849.00

  7. Challenge Hydraulic Single Cornering Machine (CH-RCH)

    • 6 sizes of cornering knives
    • Handles any size sheet
    • 4"/ 10 cm lift capacity
    • Hydraulic powered
    • Precise cutting action
    Part #: CH-RCH

    $5995.00

  8. Challenge Handy-Jog Paper Jogger with Standard Tray (CH-HANDYJOGST)

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGST

    $494.00

  9. Challenge Handy Padder Portable Padding Press (CH-HANDYPADDER)

    • Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
    • Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
    • Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
    • Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
    • Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
    Part #: CH-HANDYPADDER

    $479.00

  10. Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)

    • Up to 24 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • Electronically-adjustable and programmable clamp pressure.
    • Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
    Part #: CH-370TC

    $44250.00

  11. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X

    $28995.00

  12. Challenge 26-1/2" Cut 265 Pro Cut 265 Replacement Blade (JH-33110)

    • Compatible Models: Challenge, Pro Cut 26 1/2" Cut, 265, Pro Cut 265
    • Material: Standard Inlay
    • Holes: 12
    • Length: 31.25"
    • With: 4"
    Part #: JH-33110

    $222.59

  13. Challenge 2436A 24" x 36" Combination Flat/Tilt Paper Jogger (CH-2436A)

    • User friendly and simple dual switch operation
    • Quick mechanical jogging action
    • Flat or tilt in a perfect 60 degrees table control for a perfect stack
    • Included: (1) 12 foot electrical cord & tools.
    • User friendly and simple dual switch operation
    Part #: CH-2436A

    $2979.00

  14. Chain flights for Muller Martini Right Red Without Bearing - 235-3225 (JHOC1316)

    • MyBinding part number: JHOC1316
    • Compatible part number: 235.3225
    • Orientation: right
    • Color: red
    • Other: without bearings
    Part #: JHOC1316

    $9.00

  15. Carl XTRIMMER XTM-500 20" Industrial Rotary Paper Trimmer (CUI12500)

    • Smooth and Precise cut. Capable of cutting from the thinnest, film, flexible sheet materials and paper, up to the heaviest poster board, carboard, cellophane, leather and 80 sheets of 20lbs copy paper.
    • Precise. Extruded Aluminum rail base. Blade will not "wobble" while cutting for a nice smooth and precise cut.
    • The choice for the most demanding trimming projects. Step up your paper cutting process such as cardstock, artist board, fabric, rubber, leather materials and more. (Up to 031").
    • ø60mm Round Blade. Trim and cut with less effort with our CARL LARGE rotary blade.
    • Safety Blade Cartridge. The no touch safety system cartridge prevents te blade from ever being exposed when replacing. Blade cartridges are colored coded depending on the type of blade selection.
    Part #: CUI12500

    $137.50

  16. Carl Replacement Scoring Blade (CUI15114)

    • Compatible With: DC-100, DC-95
    • Type: Blade
    • Cutting Application: Cuts Through Paper, Film, Fabric and Felt
    • Model Number: K-14
    • Product Number: CUI15114
    Part #: CUI15114

    $3.89

  17. Carl Replacement Punch Kit for XHC-3300 - 9/32" (CUI60004)

    • Replacement Punch For: XHC-3300
    • Kit Includes: 3 Punch Heads and 6 Punch Disks
    • Drill Hole Diameter: 9/32"
    • Model Number: RP-3300
    • Product Number: CUI60004
    Part #: CUI60004

    $43.66

  18. Carl Replacement Punch Kit for XHC-3300 - 11/32" (CUI60006)

    • Replacement Punch For: XHC-3300
    • Kit Includes: 3 Punch Heads and 6 Punch Disks
    • Drill Hole Diameter: 11/32"
    • Model Number: RP-3300A
    • Product Number: CUI60006
    Part #: CUI60006

    $45.12

  19. Carl Replacement Punch Kit for XHC-150 - 9/32" (CUI60002)

    • Replacement Punch For: XHC-150
    • Kit Includes: 3 Punch Heads and 6 Punch Disks
    • Drill Hole Diameter: 9/32"
    • Model Number: RP-150
    • Product Number: CUI60002
    Part #: CUI60002

    $37.01

  20. Carl Replacement Punch Kit for HD-530 - 9/32" (CUI60007)

    • Replacement Punch For: HD-530
    • Kit Includes: 2 Punch Heads and 4 Punch Disks
    • Drill Hole Diameter: 9/32"
    • Model Number: RP-530
    • Product Number: CUI60007
    Part #: CUI60007

    $42.15

  21. Carl Replacement Perforating Blade - 2 Pack (CUI74028)

    • Compatible With: RT-200N, RT-215N
    • Type: Blade
    • Cutting Application: Cuts Through Paper, Film, Fabric and Felt
    • Model Number: G-02
    • Product Number: CUI74028
    Part #: CUI74028

    $9.79

  22. Carl Replacement Deckle Blade - 1 Pack (B-03) (CUI15003)

    • Compatible With: CC-10, PRT-100, PRT-100N, RT-200, RT-215, RT-218
    • Type: Blade
    • Cutting Application: Cuts Through Paper, Film, Fabric and Felt
    • Model Number: B-03
    • Product Number: CUI15003
    Part #: CUI15003

    $6.69

  23. Carl KM-31 Replacement Perforating/ Scoring Blade Set (CUI14031)

    • Compatible With: DC-210, DC-220, DC-238, DC-250, DC-300N
    • Type: Blade
    • Cutting Application: Cuts Through Paper, Film, Fabric and Felt
    • Model Number: KM-31
    • Product Number: CUI14031
    Part #: CUI14031

    $9.19

  24. Carl K-28/2 Replacement Straight Blade - 2 Pack (CUI14028)

    • Compatible With: DC-210, DC-220, DC-238, DC-250, DC-300N
    • Type: Blade
    • Cutting Application: Cuts Through Paper, Film, Fabric and Felt
    • Model Number: K-28/2
    • Product Number: CUI14028
    Part #: CUI14028

    $9.19

  25. Carl G-01 Replacement Straight Blade - 2 Pack (CUI74027)

    • Compatible With: RT-200N, RT-215N
    • Type: Blade
    • Cutting Application: Cuts Through Paper, Film, Fabric and Felt
    • Model Number: G-01
    • Product Number: CUI74027
    Part #: CUI74027

    $9.39

  26. Carl Extra Heavy Duty 300 Sheet 3-Hole Punch - XHC-3300 (CUI63300)

    • Hollow punch head technology requires less force.
    • Built-in paper guide for quick paper positioning and punching.
    • Preset to drill holes for standard three-ring binders.
    • Large, easy-to-empty waste trays.
    • Limited Lifetime Warranty (excluding punch heads and disks).
    Part #: CUI63300

    $229.53

  27. Carl Extra Heavy Duty 300 Sheet 2-Hole Punch - XHC-2300N (CUI62300)

    • Extra heavy-duty two hole punch drills through piles of paper with ease.
    • Features strong handle grip and hardened precision-ground all-steel punch heads.
    • Built-in paper guide ensures accurate paper positioning.
    • Transparent waste tray allows you to see when it is full
    • Extra-Heavy Duty Two-Hole Punch is made from recycled materials to help lessen impact on landfills.
    Part #: CUI62300

    $178.49

  28. Carl DC-F5300 17" Heavy-Duty Rotary Paper Trimmer with Foldable Base (CUI25100)

    • Green friendly trimmer, cuts cardstock, artist board, plastic sheets and more.
    • Patented locking rail mechanism and the luminous paper holder is made of light harvesting acrylic that makes cutting easy and accurate.
    • The adjustable magnetic paper guide holds materials on a calibrated metal baseboard as well as a foldable portable baseboard.
    • Limited Lifetime Warranty (excluding blades and cutting mats).
    • Cuts up to 45 sheets of 20lbs paper.
    Part #: CUI25100

    $112.50

  29. Carl DC-2A3N 18" Professional Rotary Paper Trimmer (CUI72018)

    • Easy operation sliding handle.
    • Rotary blade is in a fixed tight position for extra safety and more precise accurate cut.
    • Double sided metal calibrated base for accuracy and added stability.
    • The cutting blade rests directly next to the cutting rail, so there’s no guessing where the blade
    • Cuts up to 15 sheets of 20lbs paper.
    Part #: CUI72018

    $40.33

  30. Carl Corner Rounding Punch - CP6A (CUI76001)

    • Cutting Radius : 1/4 inch
    • Applications Perfect for cutting round corners on paper,photos and cards
    • Quantity : 1
    • Model Number: CP6A
    • Product Number: CUI76001
    Part #: CUI76001

    $5.03

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   80