Product listing: Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON) to Carl 18" Cutting Mat for all 18" Trimmers - 2 Pack (CUI16180)
-
Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON)
- High Capacity: Holds up to 31" of paper for production padding environments
- Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
- Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
- Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
- Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
Part #: CH-PADDYWAGON -
Challenge Handy-Jog Paper Jogger with Standard Tray (CH-HANDYJOGST)
- Front Side Loading
- Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
- Up to 11" x 17" stock tray
- Powerful jogging action
- Quiet operation
Part #: CH-HANDYJOGST -
Challenge Handy-Drill Single Spindle Paper Drill (CH-HANDYDRILL)
- 2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
- Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
- Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced.
- Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting.
- Adjustable Margins: Thumb screws easily lock the backguage to the drill table. To adjust the margins, simply loosen the screws and line-up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to 2.5" margin from the edge of the paper.
Part #: CH-HANDYDRILL -
Challenge Handy Padder Portable Padding Press (CH-HANDYPADDER)
- Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
- Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
- Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
- Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
- Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
Part #: CH-HANDYPADDER -
Challenge EH-3 Hydraulic Three Spindle Paper Drill (CH-EH3)
- Features:
- Powerful hydraulic operation
- 2-1/2"/ 6.4 cm drilling depth
- Fast and easy drill head adjustments
- Adjustable backgauge
Part #: CH-EH3 -
Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)
- Up to 24 cuts per minute.
- Virtually maintenance-free design.
- Fully-adjustable knife bar gibs (front and rear).
- Electronically-adjustable and programmable clamp pressure.
- Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
Part #: CH-370TC -
Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)
- 30-1/2" Cutting Width, 4" Clamp Opening
- Hydraulic Clamping & Cutting
- Adjustable Clamp Pressure
- Manual Foot Pedal Clamping
- Backgauge Position Indicator
Part #: CH-305X -
Challenge 26-1/2" 265F Replacment Blade (JH-33000)
- Compatible Models: Challenge 26 1/2", 265F
- Material: Standard Inlay
- Holes: 12
- Length: 30.75"
- Width: 4"
Part #: JH-33000 -
Challenge 20 Multi 2020 Titan 200 Replacement Blade (JH-31780)
- Compatible Models: Challenge, Multi 20, MULTI 2020, TITAN 200
- Material: Standard Inlay
- Holes: 4
- Length: 23.75"
- Width: 3"
Part #: JH-31780 -
Carl XTRIMMER XTM-650 26" Industrial Rotary Paper Trimmer (CUI12650)
- Smooth and Precise cut. Capable of cutting from the thinnest, film, flexible sheet materials and paper, up to the heaviest poster board, carboard, cellophane, leather and 80 sheets of 20lbs copy paper.
- Precise. Extruded Aluminum rail base. Blade will not "wobble" while cutting for a nice smooth and precise cut.
- The choice for the most demanding trimming projects. Step up your paper cutting process such as cardstock, artist board, fabric, rubber, leather materials and more. (Up to 031").
- ø60mm Round Blade. Trim and cut with less effort with our CARL LARGE rotary blade.
- Safety Blade Cartridge. The no touch safety system cartridge prevents te blade from ever being exposed when replacing. Blade cartridges are colored coded depending on the type of blade selection.
Part #: CUI12650 -
Carl XTRIMMER XTM-500 20" Industrial Rotary Paper Trimmer (CUI12500)
- Smooth and Precise cut. Capable of cutting from the thinnest, film, flexible sheet materials and paper, up to the heaviest poster board, carboard, cellophane, leather and 80 sheets of 20lbs copy paper.
- Precise. Extruded Aluminum rail base. Blade will not "wobble" while cutting for a nice smooth and precise cut.
- The choice for the most demanding trimming projects. Step up your paper cutting process such as cardstock, artist board, fabric, rubber, leather materials and more. (Up to 031").
- ø60mm Round Blade. Trim and cut with less effort with our CARL LARGE rotary blade.
- Safety Blade Cartridge. The no touch safety system cartridge prevents te blade from ever being exposed when replacing. Blade cartridges are colored coded depending on the type of blade selection.
Part #: CUI12500 -
Carl Replacement Short-Wave Blade - 1 Pack (B-04) (CUI15004)
- Compatible With: CC-10, PRT-100, PRT-100N, RT-200, RT-215, RT-218
- Type: Blade
- Cutting Application: Cuts Through Paper, Film, Fabric and Felt
- Model Number: B-04
- Product Number: CUI15004
Part #: CUI15004 -
Carl Replacement Punch Kit for XHC-3300 - 11/32" (CUI60006)
- Replacement Punch For: XHC-3300
- Kit Includes: 3 Punch Heads and 6 Punch Disks
- Drill Hole Diameter: 11/32"
- Model Number: RP-3300A
- Product Number: CUI60006
Part #: CUI60006 -
Carl Replacement Punch Kit for XHC-150 - 9/32" (CUI60002)
- Replacement Punch For: XHC-150
- Kit Includes: 3 Punch Heads and 6 Punch Disks
- Drill Hole Diameter: 9/32"
- Model Number: RP-150
- Product Number: CUI60002
Part #: CUI60002 -
Carl Replacement Punch Kit for HD-530 - 9/32" (CUI60007)
- Replacement Punch For: HD-530
- Kit Includes: 2 Punch Heads and 4 Punch Disks
- Drill Hole Diameter: 9/32"
- Model Number: RP-530
- Product Number: CUI60007
Part #: CUI60007 -
Carl Replacement Deckle Blade - 1 Pack (B-03) (CUI15003)
- Compatible With: CC-10, PRT-100, PRT-100N, RT-200, RT-215, RT-218
- Type: Blade
- Cutting Application: Cuts Through Paper, Film, Fabric and Felt
- Model Number: B-03
- Product Number: CUI15003
Part #: CUI15003 -
Carl K-28/2 Replacement Straight Blade - 2 Pack (CUI14028)
- Compatible With: DC-210, DC-220, DC-238, DC-250, DC-300N
- Type: Blade
- Cutting Application: Cuts Through Paper, Film, Fabric and Felt
- Model Number: K-28/2
- Product Number: CUI14028
Part #: CUI14028 -
Carl G-01 Replacement Straight Blade - 2 Pack (CUI74027)
- Compatible With: RT-200N, RT-215N
- Type: Blade
- Cutting Application: Cuts Through Paper, Film, Fabric and Felt
- Model Number: G-01
- Product Number: CUI74027
Part #: CUI74027 -
Carl Extra Heavy Duty 300 Sheet 3-Hole Punch - XHC-3300 (CUI63300)
- Hollow punch head technology requires less force.
- Built-in paper guide for quick paper positioning and punching.
- Preset to drill holes for standard three-ring binders.
- Large, easy-to-empty waste trays.
- Limited Lifetime Warranty (excluding punch heads and disks).
Part #: CUI63300 -
Carl Extra Heavy Duty 300 Sheet 2-Hole Punch - XHC-2300N (CUI62300)
- Extra heavy-duty two hole punch drills through piles of paper with ease.
- Features strong handle grip and hardened precision-ground all-steel punch heads.
- Built-in paper guide ensures accurate paper positioning.
- Transparent waste tray allows you to see when it is full
- Extra-Heavy Duty Two-Hole Punch is made from recycled materials to help lessen impact on landfills.
Part #: CUI62300 -
Carl Extra Heavy Duty 150 Sheet 3-Hole Punch - XHC-150N (CUI63150)
- Hollow punch head technology requires less force.
- Built-in paper guide for quick paper positioning and punching.
- Preset to drill holes for standard three-ring binders.
- Large, easy-to-empty waste trays.
- Open punching width for any size project
Part #: CUI63150 -
Carl Extra Heavy Duty 100 Sheet 2-Hole Punch - XHC-2100N (CUI62100)
- Standard 1/4" Hole Diameter.
- Strong handle grip allows easy punching.
- Hardened precision-ground all-steel punch heads.
- Built-in paper guide.
- Transparent receptacle tray.
Part #: CUI62100 -
Carl DC-2A3N 18" Professional Rotary Paper Trimmer (CUI72018)
- Easy operation sliding handle.
- Rotary blade is in a fixed tight position for extra safety and more precise accurate cut.
- Double sided metal calibrated base for accuracy and added stability.
- The cutting blade rests directly next to the cutting rail, so there’s no guessing where the blade
- Cuts up to 15 sheets of 20lbs paper.
Part #: CUI72018 -
Carl 6-Pack Replacement Punch Disks - RP-DISKS (CUI60001)
- Replacement Punchs Disks For: HC-72, XHC-150, XHC-2100n, XHC-2300 and XHC-3300
- Quantity: 6 Replacement Punch Disks
- Model Number: RP-DISKS
- Product Number: CUI60001
- 6 Replacement Punch Disks
Part #: CUI60001 -
Carl 25" Heavy Duty 20 Sheet Rotary Trimmer - DC-250 (CUI12250)
- Cutting Capacity (# of sheets per pass): 20
- Cutting Length (inches): 25
- Number of Blades Included: 1 Blade Included
- Color: Gray
- Qty Per Pack: 1
Part #: CUI12250 -
Carl 25" Cutting Mat for all 25" Trimmers - 2 Pack (CUI16250)
- Compatible With: All 25" Carl trimmer
- Type: Cutting Mat
- Length: 25"
- Model Number: RM-25/2
- Product Number: CUI16250
Part #: CUI16250 -
Carl 18mm White Steel 3:1 Spiral Wire Coil - 3pk (CR-18003)
- Color: Black
- Maximum Binding Size: up to 12"
- Pitch: 3:1 (3 Holes Per Inch)
- Ring Diameter: 18mm/.71"
- Compatible With: Carl CR-B12 Ring Binding System and most 3:1 coil binding system
Part #: CR-18003 -
Carl 18mm Gray Steel 3:1 Spiral Wire Coil - 3pk (CR-18001)
- Color: Gray
- Maximum Binding Size: up to 12"
- Pitch: 3:1 (3 Holes Per Inch)
- Ring Diameter: 18mm/.71"
- Compatible With: Carl CR-B12 Ring Binding System and most 3:1 coil binding system
Part #: CR-18001 -
Carl 18" Heavy Duty 36 Sheet Rotary Trimmer - DC-238N (CUI12238)
- Cutting Capacity (# of sheets per pass): 36
- Cutting Length (inches): 18
- Number of Blades Included: 1 Blade Included
- Color: Black
- Qty Per Pack: 1
Part #: CUI12238 -
Carl 18" Cutting Mat for all 18" Trimmers - 2 Pack (CUI16180)
- Compatible With: All 18" Carl trimmer
- Type: Cutting Mat
- Length: 18"
- Model Number: RM-18/2
- Product Number: CUI16180
Part #: CUI16180
