Product listing: Challenge 370XG Replacement Blade (JH-34450) to Count PerfMaster Dash Hand Crank Perforating and Scoring Machine (CPMASTERDASH)

Page
View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. Challenge 370XG Replacement Blade (JH-34450)

    • Compatible Models: Challenge 370XG
    • Material: Standard Inlay
    • Holes: 18
    • Length: 43.25"
    • With: 4.5"
    Part #: JH-34450

    $402.79

  2. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X

    $28995.00

  3. Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)

    • Up to 24 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • Electronically-adjustable and programmable clamp pressure.
    • Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
    Part #: CH-370TC

    $44250.00

  4. Challenge Handy Cart Paper Stock Truck (CH-HANDYCART)

    • Mobility & Control: Four 5" hard rubber swivel casters and four handles make your Handy-Cart easy to control and easy to roll from place to place.
    • Keeping Stock Square : Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
    • Solid Construction - Shipped to you in one piece, the HANDY-CART is constructed of heavy gauge, welded steel.
    • Products Working for You: The Handy-Cart is another great product value from Challenge! All of our products are engineered to make your job easier.
    • Full-size lower shelf with a lip to prevent items from sliding off.
    Part #: CH-HANDYCART

    $644.00

  5. Challenge Handy-Drill Single Spindle Paper Drill (CH-HANDYDRILL)

    • 2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
    • Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
    • Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced.
    • Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting.
    • Adjustable Margins: Thumb screws easily lock the backguage to the drill table. To adjust the margins, simply loosen the screws and line-up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to 2.5" margin from the edge of the paper.
    Part #: CH-HANDYDRILL

    $1445.00

  6. Challenge Handy-Jog Paper Jogger with Standard Tray (CH-HANDYJOGST)

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGST

    $494.00

  7. Challenge JF Single Spindle Paper Drill (CH-JFPAPERDRILL)

    • Convenient Foot Pedal Operation
    • 2" Drilling Capacity: Drills up to 2" lifts of stock in a single stroke.
    • 13 Hollow Drill Bit Sizes: Hole sizes range from 1/8" to 1/2" diameters.
    • Auto - Trip Side Guide: For muliple hole patterns, the versatile backguage offers up to four adjustable stop locations (additonal adjustable stops sold separately). The auto-trip feature automatically releases the paper guide to advance to the next stop setting upon the completion of each stroke cycle.
    • Adjustable Margins: Thumb screws easily lock the backgauge to the drill table. To adjust your margins simply loosen the screws and line up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to a 4" margin from the edge of the paper.
    Part #: CH-JFPAPERDRILL

    $2450.00

  8. Challenge Titan 230 Replacement Blade - 42007 (JH-31930)

    • Type of Blade: Standard Inlay
    • Dimensions (L x W x T): 26.750" x 3.000" x .375"
    • Holes/Slots: 5H
    • Type of Blade: Standard Inlay
    • Dimensions (L x W x T): 26.750" x 3.000" x .375"
    Part #: JH-31930

    $180.19

  9. ChannelBind Black 8.5" x 11" Linen Soft Covers with Window (Size A) - 25pk (CHB-24115)

    • "U" shape steel channel that uses pressure to bind, producing high quality bound documents
    • Can hold 41 - 95 sheets of 20lb letter 8.5" x 11" documents.
    • Compatible with ChannelBind and MetalBind binding machines.
    • Sheet Capacity: 41 - 95 sheets of 20lb
    • Channel Size: A
    Part #: CHB-24115

    $80.93

  10. ChannelBind Gray 8.5" x 11" Linen Hard Covers (Size AA) - 25pk (CHB-21104)

    • "U" shape steel channel that uses pressure to bind, producing high quality bound documents
    • Can hold 15 - 40 sheets of 20lb letter 8.5" x 11" documents.
    • Compatible with ChannelBind and MetalBind binding machines.
    • Sheet Capacity: 15 - 40 sheets of 20lb
    • Channel Size: AA
    Part #: CHB-21104

    $162.18

  11. ChannelBind Green 9" x 11" Linen Soft Covers with Window (Size C) - 25pk (CHB-28139)

    • "U" shape steel channel that uses pressure to bind, producing high quality bound documents
    • Can hold 126 - 150 sheets of 20lb 9" x 11" documents.
    • Compatible with ChannelBind and MetalBind binding machines.
    • Sheet Capacity: 126 - 150 sheets of 20lb
    • Channel Size: C
    Part #: CHB-28139

    $85.93

  12. Chrome Max Label Round Badge Reel with Slide Clip - 25pk (MYID905GCCRM)

    • Material: Plastic
    • Reel Diameter: 1-5/16" (33mm)
    • Color: Chrome
    • Attachment: Vinyl Strap
    • Clip: Belt Clip
    Part #: MYID905GCCRM

    $58.09

  13. Chrome Reinforced Badge Reel w Silver Sticker and Belt Clip - 25pk (2120-3100)

    • Type: Round Badge Reels with Reinforced Vinyl Straps and Decorative Stickers
    • Reel Diameter: 1-1/4"
    • Cord Length: 34 Inches
    • Color: Chrome
    • Attachment: Reinforced Vinyl Strap
    Part #: 2120-3100

    $43.09

  14. Clear 15 Ring Half Size Plastic Binding Combs (MYPCCLH)

    • Color: Clear
    • Size: 3/16" - 1-1/8"
    • Approximate Capacity: 10 Sheets - 225 Sheets
    • Length: 5.5" (15 Rings)
    • Shape: 3/16"-1-1/8" Round / 1-1/4"-2" Oval
    Part #: MYPCCLH

    $19.39

  15. Clear Colored Plastic 38" 2.5mm Beaded Neck Chains - 100pk (2130-4000)

    • Type: Beaded Neck Chain
    • Color: Clear
    • Material: Colored Plastic
    • Connector: NPS Beaded Chain Connector
    • Length: 38" (965mm)
    Part #: 2130-4000

    $44.00

  16. Clear Horizontal Anti-Print Transfer Badge Holders - 100pk (1815-1151)

    • Type: Anti-Print Transfer Badge Holder
    • Color: Clear
    • Orientation: Horizontal (Top Load)
    • Connectors: Slot and Chain Holes
    • Max Card Size: 3-3/8" x 2-3/8" (86mm x 59mm)
    Part #: 1815-1151

    $44.01

  17. Clear Soft Horizontal Badge Holder w/ Fold-Over Flap (2-5/8"x3-45/64") - 100pk (MYBP50635FS)

    • Type: Badge Holder
    • Color: Clear
    • Orientation: Horizontal
    • Size: 2-5/8"x3-45/64"
    • Quantity: 100 pieces
    Part #: MYBP50635FS

    $64.01

  18. Clear Soft Vertical Badge Holder w/ Zipper Closure (2-1/4" x 3-1/4") - 100pk (MYBP506ZNS)

    • Type: Badge Holder
    • Color: Clear
    • Orientation: Vertical
    • Size: 2-1/4" x 3-1/4"
    • Quantity: 100 pieces
    Part #: MYBP506ZNS

    $45.99

  19. Clear Vertical Locking Plastic Card Holder - 50pk (MYBP706LT1)

    • Type: Card Holder
    • Color: Clear
    • Orientation: Vertical
    • Size: 3-3/8" x 2-1/8"
    • Quantity: 50 pieces
    Part #: MYBP706LT1

    $130.39

  20. Clear Vinyl Straps with 2-Hole Brass Snap Clips - 500pk (2105-1310)

    • Type: Clear Vinyl Strap Clips
    • Color: Clear
    • Strap Material: Clear Vinyl
    • Strap Length: 2-3/4" (70mm)
    • Clip Material: Stainless Steel
    Part #: 2105-1310

    $220.09

  21. Clear Vinyl Vertical Extra Large Credential Holder (3-1/2" x 5-1/2") - 100pk (MYBP50646)

    • Type: Credential Holder
    • Color: Clear
    • Orientation: Vertical
    • Size: 3-1/2" x 5-1/2"
    • Quantity: 100 pieces
    Part #: MYBP50646

    $62.00

  22. Clear Vinyl Vertical Extra Large Credential Holder (3" x 8") - 100pk (MYBP50635875)

    • Type: Credential Holder
    • Color: Clear
    • Orientation: Vertical
    • Size: 3" x 8"
    • Quantity: 100 pieces
    Part #: MYBP50635875

    $68.00

  23. Compatible Fluorescent Red Ink Cartridge (PMIC10) for FP Postbase Mini Postage Meter - 1pk (MRFPMIC10)

    • Color: Fluorescent Red
    • Compatible With Following Printers: Francotyp-Postalia Postbase MINI
    • Comparable OEM#s: Francotyp PMIC10
    • Quantity: 1pk
    • Part Number: MRFPMIC10
    Part #: MRFPMIC10

    $126.62

  24. Compatible Fluorescent Red Ink Cartridge for FP Mymail/Mymailmax Postage Meter - 1pk (MRF0022)

    • Color: Fluorescent Red
    • Compatible With Following Printers: Francotyp-Postalia Mymail and Francotyp-Postalia Mymailmax
    • Comparable OEM#s: Francotyp MIC and Francotyp 580032002200
    • Quantity: 1pk
    • Part Number: MRF0022
    Part #: MRF0022

    $81.54

  25. Copper Metallic Laminating / Toner Fusing Foil (MYCOP-30)

    • Color: Copper Metallic
    • Width: 8", 12", or 24"
    • Roll Length: 100'
    • Core Size: 1/2"
    • 8", 12", or 24" widths available
    Part #: MYCOP-30

    $32.85

  26. Copper Metallic Toner Fusing/Sleeking Foil - 3" Core (COP-30-3)

    • Add an array of optical effects to your project without the trouble and expense of foil die creation
    • Sleeking is a new and improved way of foil stamping. It gives you the option to apply gloss or matte metallic colored film overlays, and holographic effects for full image, spot image and background image printing.
    • Can be used with a roll laminator with 3 inch core for sleeking applications.
    • Perfect for making business cards, invitations, greetings cards, certificates, and more
    • Color: Copper Metallic
    Part #: COP-30-3

    $114.50

  27. Copper Satin Matte 12" x 100' Laminating / Toner Fusing Foil (SM-COP-40-12)

    • Item: SM-COP-40-12
    • Color: Copper Satin Matte
    • Width: 12"
    • Roll Length: 100'
    • Core Size: 1/2"
    Part #: SM-COP-40-12

    $51.39

  28. Count AccuCreaser Air Modular Digital Creasing Machine w/ KF200 Knife Folder (ACTREG/KF200)

    • Count AccuCreaser Details:
    • Provides modes for creasing, perforating or feeding.
    • Bottom vacuum feed with sheet spacing control.
    • CAM actuated compression creasing ensures maximum crease accuracy.
    • Automated distance recognition allows auto setups for your most common creases and corresponding folds, including perfect bind.
    Part #: ACTREG/KF200

    $26455.00

  29. Count Friction-Fed Digital Creasing/Perforating/Numbering Machine (FC114)

    • Simple programming allows you to number, perforate or crease individually.
    • Creasing:
    • Rotary-actuated impact creasing.
    • Two-sided creasing die - one side has a narrow crease and the other a wide crease for heavier stock to change, simply remove the die and flip it over.
    • Automated Distance Recognition - allows auto setups for your most common creases and corresponding folds.
    Part #: FC114

    $13015.00

  30. Count PerfMaster Dash Hand Crank Perforating and Scoring Machine (CPMASTERDASH)

    • Easy-to-use hand crank operation is simple and affordable.
    • Removable receiving tray and magnetic guide rails make for easy mobility and tabletop use.
    • Quickly change from perforating to scoring in seconds.
    • Easily set Perf/Score depth control.
    • 18" wide feed capacity.
    Part #: CPMASTERDASH

    $3513.00

Items 1-15 of 22

Display Type List Grid
Page:   1   10   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   60   70   80