Product listing: Fellowes Powershred LX220 Black Level P-4 Micro-Cut Shredder (5015401) to Fujipla Clear ALM Laminator Roll Film - 3mil Matte 12.6" x 492' (DL-AM1U-3) (SAP75MATT)
-
Fellowes Powershred LX220 Black Level P-4 Micro-Cut Shredder (5015401)
- New IntelliBar with patented responsive technology provides next generation responsiveness for superior shredding performance.
- 100% Jam Proof System automatically detects and powers through tough jobs for frustration-free shredding.
- Efficiency Meter indicates the potential for increased sheet capacity in real-time to maximize productivity.
- Integrated SafeSense Technology stops shredding when hands or paws touch the paper entry.
- Shreds 12 sheets of paper per pass into tiny micro-cut particles for superior security. Also shreds staples, paper clips, credit cards and unopened junk mail.
Part #: 5015401 -
Fellowes Saturn 3i 95 Laminator with Pouch Starter Kit (5735801)
- Rapid 1-minute warm-up with InstaHeat Technology
- 9-1/2" entry width accommodates multiple document sizes
- Hot lamination for 3-mil or 5-mil and cold setting for self-adhesive pouches
- Green light and audible beep indicate when machine is ready to laminate
- Release lever disengages pouch for re-centering or removal
Part #: 5735801 -
Fellowes True HEPA Filter (4pk) for AP-300PH Air Purifier (9370101)
- True HEPA Filter safely removes 99.97% of airborne particles as small as 0.3 microns, including pollen, ragweed and other allergens, mold spores, dust mites, viruses, germs, pet dander, cigarette smoke and odors
- Compatible with Fellowes® AP-300PH Air Purifier
- Safely removes 99.97% of airborne particles
- Compatible with Fellowes AP-300PH Air Purifier
- Can also filter cigarette smoke and odors
Part #: 9370101 -
Fletcher-Terry F-60 62" Semi-Rigid Flexible Substrate Cutter (04-722)
- Features a unique plastic knife blade cartridge allowing quick and safe blade changes.
- Cutting head equipped with "Lock & Cut" feature - cutting head lowers and locks during cutting process.
- Lock down pressure clamp - securely holds material in place while cutting ridge substrates.
- Table-top or wall-mounted cutting.
- Cutting head unit equipped with "Lock & Cut" feature - cutting head lowers and locks during cutting process.
Part #: 04-722 -
Fletcher-Terry Gemini Pro 60" Rail Cutter (GeminiPro60)
- Utilize table-mounted elevators to raise cutter above graphics for positioning cut line.
- Features sight line strip for cutting accuracy.
- No repositioning of the straight-edge required; allows you to line up the material for the entire length of the cut especially with large printed graphics or materials.
- Eliminate fatigue/injuries while working with large graphics
- Knife cutting blades are manufactured to Fletcher engineering specifications resulting in:
Part #: GeminiPro60 -
Fletcher-Terry Gray Titan 60" Board Cutter Stand (Titan60Stand)
- Material waste catcher to keep your shop clean.
- Locking wheels for easy mobility.
- Fits the Fletcher-Terry Titan 60" Board Cutter.
- Squaring arm to keep your materials square and secure.
- Material waste catcher to keep your shop clean.
Part #: Titan60Stand -
Fletcher-Terry Gray Titan 80" Board Cutter Stand (Titan80Stand)
- Squaring arm to keep your materials square and secure.
- Material waste catcher to keep your shop clean.
- Locking wheels for easy mobility.
- Fits the Fletcher-Terry Titan 80" Board Cutter.
- Squaring arm to keep your materials square and secure.
Part #: Titan80Stand -
Fletcher-Terry Titan 40" Board Cutter (Fletcher-Titan40)
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
- Trimming feature for flexible vinyls, photo paper, and canvas.
- No need for two cutters dedicated to each function; saves on space and equipment investment.
- Engineered "green" strip gives you a visible cut line; no need for guesswork.
Part #: Fletcher-Titan40 -
Flipside 18" x 24" Magnetic Unframed Dry-Erase Boards - 12pk (FS-10026)
- Economical, unframed board with magnetic-receptive plain dry erase surface is ideal for academic practice, doodling and for use with magnetic manipulatives!
- Quality write-and-wipe surface is non-ghosting.
- Rounded corners for safety and comfort.
- Comes with adhesive squares for mounting.
- Backing is warp and chip resistant.
Part #: FS-10026 -
Flipside 23" x 31" White Portfolio Cases - 10pk (FS-20090)
- Protect and transport artwork and other projects in lightweight and sturdy corrugated portfolios.
- Comes with easy-to-carry plastic handle on top edge.
- Front flap lifts up to gain access to contents and closes securely with hook and loop closures.
- White surface features a matte finish and accepts a range of craft materials easily to personalize.
- Measures 23" x 31" x 1.5" deep.
Part #: FS-20090 -
Flipside 32" x 40" Total Black 3/16" Thick Foam Board Sheets - 25pk (FS-32408)
- Presentations and projects will be taken to a whole new level with foam core boards.
- The smooth, bold black surface has a matte finish that easily accepts markers, crayons, paints and adhesives.
- Lightweight and rigid, foam board cuts easily with a knife or razor.
- Perfect for mounting photographs and artwork, 3-D modeling, signage, poster making and more!
- Boards measure 32" x 40" with 3/16" (5mm) thick, dense dark grey polystyrene foam core and black on back of sheet.
Part #: FS-32408 -
Flipside 36" x 48" 2-Ply White Corrugated Project Boards - 18pk (FS-30043)
- Constructed from sturdy lightweight 2-ply corrugated fiberboard with overlapping side panels that make transporting the board easy.
- The smooth white surface has a matte finish that easily accepts markers, crayons, paints and adhesives.
- Back of board is brown kraft.
- Measures 36" high x 48" wide overall-side panels measure 36" high x 12.75" wide and the center panel measures 36" high x 22.5" wide.
- Set of 18
Part #: FS-30043 -
Flipside 4' x 24' Natural Cork Roll (6mm Thick) (FS-38008)
- Ideal for projects that need a larger cork surface.
- Create your own bulletin board by adding fiberboard backing and a frame, use in art projects or transform a whole wall with cork!
- Durable and self-healing, cork cuts easily to any size that suits your needs.
- Natural light brown cork roll is 6 mm (0.25") thick, 4' high x 24' long.
- 1 roll per carton
Part #: FS-38008 -
Flipside 72" x 27" Silver Gridline Magnetic Whiteboard Rolling Easel (FS-19111)
- Features a premium quality, easy to clean, non-ghosting magnetic covered steel surface
- 72" x 27" Board Size
- Gridline surface visible up close for lined writing, graphics, and 3D drawings, non-visible from far away.
- Locking wheels make the easel simple to move
- Some assembly required.
Part #: FS-19111 -
Flipside 9" x 12" Magnetic Dry Erase Lap Board with Pen and Eraser - Set of 12 Each (FS-1004)
- Category: Boards >> Lap Boards >> Dry-Erase
- Manufacturer: Flipside
- Size: 9" x 12"
Part #: FS-1004 -
Flipside 9" x 12" Unframed Black Dry Erase Lap Boards - 24pk (FS-40064)
- Quality write-and-wipe surface is non-ghosting.
- Hardboard backing is warp and chip resistant.
- Rounded corners and smooth edges for comfort and safety.
- Measures 9" x 12" x 0.125"
- Set of 24
Part #: FS-40064 -
Flipside 9" x 12" XY Axis Grid/Plain Two-Sided Dry Erase Lap Boards - 24pk (FS-12000)
- Economical, unframed lap board features a blue XY axis dry erase grid on one side and plain dry erase on the other.
- Bold lines separate board into quadrants each 14 squares by 10 squares; total grid is 28 squares by 20 squares. Individual squares measure 3/8" x 3/8".
- Boards feature non-ghosting dry erase surface with rounded corners and smooth edges for safety and comfort.
- Durable hardboard backing is warp and chip resistant.
- Measure 9" x 12" x 0.125"
Part #: FS-12000 -
Flipside Adjustable-Height Dry-Erase Floor/Tabletop Easel (FS-51000)
- Multi-use, adjustable-height easel offers presention options you can take anywhere!
- Sleek 1/2" aluminum frame surrounds a quality, non-ghosting dry erase board.
- Bottom marker tray spans the entire width and will support posters and large-format books.
- Locking safety hinges ensure a stability and fold for storage.
- Steel tubing legs feature anti-skid tips and are height adjustable for use on the floor or table top.
Part #: FS-51000 -
Flipside Magnetic Unframed Dry-Erase Boards (FS-MAGUF)
- Economical, unframed board with magnetic-receptive plain dry erase surface is ideal for academic practice, doodling and for use with magnetic manipulatives!
- Quality write-and-wipe surface is non-ghosting.
- Rounded corners for safety and comfort.
- Comes with adhesive squares for mounting.
- Backing is warp and chip resistant.
Part #: FS-MAGUF -
Formax 1-Gallon Shredder Oil - 4 Bottles (8000-20)
- Lubricates the cutting heads and removes dust particles for increased shredder performance.
- Slow down wear and tear of your Formax shredders.
- Compatible With: All Shredders
- Quantity: 4 (1-Gallon bottles)
- Product Number: 8000-20
Part #: 8000-20 -
Formax 1" Round White Paper Roll Tabs for FD 262 and FD 282 Tabbers - 12 Rolls (FD-262-10)
- Tabs Per Roll: 10,000
- Compatible Tabbers: Formax FD 262 and FD 282
- Thickness: 1"
- Quantity: 12 rolls per case
- Tabs Per Roll: 10,000
Part #: FD-262-10 -
Formax Cut-True 13M 14.5" Tabletop Manual Paper Cutter (Cut-True13M)
- Guillotine cutter accurately cuts through paper stacks up to .75" high, up to 14.5" wide
- LED Laser cut line for pinpoint accuracy
- High-quality steel blade
- Front and rear safety covers
- Two-handed cutter arm and safety switch operation
Part #: Cut-True13M -
Formax Cutting Sticks for Cut-True 31A and 31H Cutters - 10pk (FDCT31-20)
- Product Type: Cutting Sticks
- Designed for: Formax 31A and 31H
- Quantity: 10pk
- Product Number: FDCT31-20
- Product Type: Cutting Sticks
Part #: FDCT31-20 -
Formax Shredder Bags for FD 8804 and 8806 Series - 100pk (8000-80)
- Type: Formax Shredder Bags
- Compatible Shredders: FD 8804 Series, FD 8806 Series
- Quantity: Case of 100
- Part Number: 8000-80
- Type: Formax Shredder Bags
Part #: 8000-80 -
FR1 Face Shield (Velcro Strap) - 100/Box (CSFS.SHIELD.V)
- Wide lens material with uncompromised peripheral, upward and downward vision.
- Lightweight design that fastens securely to your head ensuring the face shield moves with you.
- Industrial foam padding for increased comfort.
- Velcro strap version.
- 100 pieces per box
Part #: CSFS.SHIELD.V -
FR1 Face Shield (Velcro Strap) - 20 /Box (CSFS.SHIELD.S)
- Wide lens material with uncompromised peripheral, upward and downward vision.
- Lightweight design that fastens securely to your head ensuring the face shield moves with you.
- Industrial foam padding for increased comfort.
- Velcro strap version.
- 20 pieces per box
Part #: CSFS.SHIELD.S -
Frameworks 48" x 63" Monthly Calendar Pull-Down Dry-Erase Chart (FW-90201)
- Features a perpetual calendar with plenty of room to list activities, assignments and more—the ultimate classroom management tool!
- High-quality, pull-down dry erase chart hangs anywhere you need it!
- The spring-loaded roller will retract chart completely, keeping it out of the way until you need it.
- Includes hanging chains and track—perfect for hanging above chalkboards or on the wall.
- Measures 48"W x 63"L.
Part #: FW-90201 -
Fujipla ALM Laminator Elegant Silk Matte Roll Film (ECOSILKMATTE)
- Compatible with Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
- Designed and developed for On Demand Digital prints
- ALM films are ASAP Film (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
- Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
- Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
Part #: ECOSILKMATTE -
Fujipla Clear ALM Laminator Roll Film - 10mil Gloss 12.6" x 165' (SAP250GLOSS)
- Compatible with Fujipla ALM3222 Automatic Laminator Only
- Designed and developed for On Demand Digital prints
- ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
- Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
- Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
Part #: SAP250GLOSS -
Fujipla Clear ALM Laminator Roll Film - 3mil Matte 12.6" x 492' (DL-AM1U-3) (SAP75MATT)
- Compatible with Fujipla ALM3220 or ALM3222 Automatic Laminator.
- Designed and developed for On Demand Digital prints.
- ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
- Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints.
- Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F.
Part #: SAP75MATT
