Product listing: Samsill 2" Green Value Round Ring Storage Binder - 12pk (SAM-11604) to SEAL Nolite 165 6.5mil Matte 30" x 10' Printable Display Media (SNL60129)
-
Samsill 2" Green Value Round Ring Storage Binder - 12pk (SAM-11604)
- Premium quality vinyl tightly sealed over rigid board.
- Special ribbed seal adds flexible strength at the hinge.
- Pockets inside front and back provide convenient storage for loose materials.
- Rust resistant ring metals with double boosters.
- Color: Green
Part #: SAM-11604 -
Samsill 2" Red Value Round Ring Storage Binder - 12pk (SAM-11603)
- Premium quality vinyl tightly sealed over rigid board.
- Special ribbed seal adds flexible strength at the hinge.
- Pockets inside front and back provide convenient storage for loose materials.
- Rust resistant ring metals with double boosters.
- Color: Red
Part #: SAM-11603 -
Samsill 3" Black Insertable Angle-D Ring View Binder - 12pk (SAM-16780)
- Premium quality vinyl tightly sealed over rigid board.
- Special ribbed seal adds flexible strength at the hinge.
- Pockets inside front and back provide convenient storage for loose materials.
- Rust resistant ring metals with double boosters.
- Clear overlay to customize front, back and spine.
Part #: SAM-16780 -
Samsill Assorted Fashion Economy Insertable Round Ring View Binder (SAFEIRRVB)
- Snap 3-hole punched documents into round ring or store in 2 clear inside pockets
- Clear overlay for customizing front, back and spine
- For 8.50" Width x 11" Length paper
- 1" - 2" capacity; assorted colors
- 40% post-consumer material
Part #: SAFEIRRVB -
Samsill Blue Value Round Ring Storage Binder (SAMVALRRINGBL)
- 3-ring format secures 3-hole punched documents
- Pockets inside front and back covers store loose documents
- Stain-resistant vinyl surface wipes clean
- Special ribbed seal adds flexible strength at the hinge
- Sheet Capacity: 225 - 700 sheets
Part #: SAMVALRRINGBL -
Samsill Burgundy Value Round Ring Storage Binder (SAMVALRRINGBUR)
- 3-ring format secures 3-hole punched documents
- Pockets inside front and back covers store loose documents
- Stain-resistant vinyl surface wipes clean
- Special ribbed seal adds flexible strength at the hinge
- Sheet Capacity: 125 - 575 sheets
Part #: SAMVALRRINGBUR -
Samsill Lime Fashion Presentation Round Ring View Binder - 12pk (SAMFPRRINGLME)
- Clear overlay on front, back and spine for easy customization
- Back-mounted round rings so pages lie flat
- 2 inside pockets for loose documents
- 100% recyclable
- Sheet Capacity: 225 - 450 sheets
Part #: SAMFPRRINGLME -
Samsill White Earth's Choice Biodegradable Angle-D Ring View Binders (SAM-ECOADRVBWH)
- Binder Type: Ring Binder
- Binder Style: View
- Color(s): White
- Sheet Size (W x H): 8 1/2 in x 11 in
- Fastener Style: Angle-D Ring
Part #: SAM-ECOADRVBWH -
Samsill White Insertable Angle-D Ring View Binder (SAMWHTINS)
- Angle-D rings provide up to 25% more paper capacity than round rings
- Binder capacity holds up to 250 - 1,050 sheets
- Rings mounted on back allow pages to lie flat; reduces wear on paper
- 2 clear inside pockets for loose documents
- Sheet Capacity: 250 - 1,050 sheets
Part #: SAMWHTINS -
Sassy Salmon 5.5" x 8.5" Card Stock Covers - 100pk (MYCS5.5X8.5SS)
- Color: Sassy Salmon
- Size: 5.5" x 8.5" (Half Size)
- Type: Card Stock Covers
- Thickness: 75lb cover stock
- Corners: Square
Part #: MYCS5.5X8.5SS -
Scotch Dual Laminate Refill Cartridge (LS960) 5.4mil Glossy 8.625"x90' - 1 Roll (DL961)
- Laminator Supply Type: Cartridge
- Length: 90 ft
- Thickness/Gauge: 5.4 mil
- Finish: Glossy
- Weight 2.604 lbs
Part #: DL961 -
Scotch Dual Laminate Refill Cartridge for LS1000 - 12 in x 100 ft (DL1001)
- Laminator Supply Type: Cartridge
- Length: 100 ft
- Width: 12 inches
- Thickness/Gauge: 5.6 mil
- Finish: Glossy
Part #: DL1001 -
Scotch Dual Laminate Refill Cartridge for LS950 - 8 1/2 in x 100 ft (DL951)
- Laminator Supply Type: Cartridge
- Length: 100 ft
- Width: 8 1/2 inches
- Thickness/Gauge: 5.6 mil
- Finish: Standard Gloss
Part #: DL951 -
SEAL 38" x 15' 2.75mil Print Mount Plus Pressure-Sensitive Mounting Adhesive (SPMP60662)
- 2.75 mil solvent acrylic adhesive with clear polyester carrier and single release paper.
- Perfect for mounting digital, photographic and reprographic prints to a variety of substrates including cardboard, foam board, wood, and plastic.
- Provides a strong permanent bond and can be used in both indoor and outdoor applications.
- Get 1 roll on every order.
- 2.75 mil solvent acrylic adhesive with clear polyester carrier and single release paper.
Part #: SPMP60662 -
SEAL 38" x 15' 3.5mil Print Shield Standard UV Gloss Pressure-Sensitive Laminating Film (SPS62201)
- Premium-grade vinyl with an advanced water-based acrylic adhesive technology.
- Delivers reduced silvering and extended outdoor durability.
- Offers affordable protection against harmful UV rays, dirt and abrasion.
- Extend the life of your universal indoor applications for up to five years and outdoor applications for up to three years.
- Gloss finish and comes with a single paper release liner.
Part #: SPS62201 -
SEAL 38" x 15' 5mil Print Shield Polycarbonate Textured Matte Pressure Sensitive Laminating Film (SPSP62701)
- High quality and most durable laminate.
- Enabling it to handle the wear-and-tear that trade show graphics must endure.
- Textured velvet luster finish adds ridgity to graphics without losing the flexibility required for storage.
- Its aggressive adhesive allows rolled graphic storage without tunneling.
- Remarkable durability for photographic, inkjet, reprographic and other digital output.
Part #: SPSP62701 -
SEAL 38" x 150' 5mil Print Shield Polycarbonate Textured Matte Pressure Sensitive Laminating Film (SPSP62702)
- High quality and most durable laminate.
- Enabling it to handle the wear-and-tear that trade show graphics must endure.
- Textured velvet luster finish adds ridgity to graphics without losing the flexibility required for storage.
- Its aggressive adhesive allows rolled graphic storage without tunneling.
- Remarkable durability for photographic, inkjet, reprographic and other digital output.
Part #: SPSP62702 -
SEAL 38" x 200' 2mil Print Mount Delta Pressure-Sensitive Mounting Adhesive (SPMD63162)
- 2mil adhesive with clear polyester carrier and single release liner.
- Excellent economical adhesive for digital prints.
- High initial tack that permanently bonds to both soft and rigid substrates.
- Ideal for use in indoor and short-term outdoor applications.
- Get 1 roll on every order.
Part #: SPMD63162 -
SEAL 38" x 200' 3mil Print Shield Base Matte Pressure Sensitive Laminating Film (SPSB83183)
- Designed for short-term applications such as Point of Sale, where quick turnaround is key to achieving promotional success.
- Provides protection against dirt and abrasion.
- Matte finish.
- Outdoor durability of one year and an indoor durability of three years.
- Roll Width: 38"
Part #: SPSB83183 -
SEAL 38" x 200' 5mil Floor Guard Textured Heat-activated Laminating Film (SFG2962)
- Premium non-slip, heat-activated (200°F) over-laminating film with an aggressive solvent acrylic adhesive specifically designed for the creation of interior floor graphics.
- Offers a non-reflective textured finish that affords clear viewing while also providing a durable, scuff-resistant, waxable surface.
- Meets international standards for slip resistance.
- Constructed from 5mil (4/1) PVC, Floor Guard.
- Doubles as an excellent pop-up display over-laminate for trade show graphics.
Part #: SFG2962 -
SEAL 41" x 400' 3mil PrintGuard UV Satin Matte Heat-Activated Laminating Film (SPGUV1660)
- Low-reflecting finish virtually eliminates glare while protecting prints from fading and handling.
- Offers UV protection and is an excellent choice for wall mounted displays.
- Constructed of a thin vinyl based film.
- Low activation temperature (185-195° F) solvent adhesive for maximum flexibility and conforming properties.
- Can be applied with any SEAL multi-temperature roller laminator.
Part #: SPGUV1660 -
SEAL 43" x 250' 3mil Jet Guard Gloss Heat-activated Laminating Film (SJGUV62104)
- Designed to provide UV protection, high-impact color enhancement, sharp image contrast.
- Durability needed to withstand the demands of your display’s environment.
- Low activation temperature of 185 - 205º F and has a gloss finish.
- Roll Width: 43"
- Roll Length: 250'
Part #: SJGUV62104 -
SEAL 51" x 400' 4mil Print Shield Standard UV Matte Pressure-Sensitive Laminating Film (SPS62228)
- Premium-grade vinyl with an advanced water-based acrylic adhesive technology.
- Delivers reduced silvering and extended outdoor durability.
- Offers affordable protection against harmful UV rays, dirt and abrasion.
- Extend the life of your universal indoor applications for up to five years and outdoor applications for up to three years.
- Matte finish and comes with a single paper release liner.
Part #: SPS62228 -
SEAL 54 Base 55" Wide Format Heat Assist Laminator (SEAL-54Base)
- Heat assisted top roller for superb lamination performance.
- 55" working width to handle a wide range of media.
- Maximum operating speed of 16.4’/minute.
- 2" nip with manual adjustment suitable for working with a sled for road signs.
- Enhanced take-up featuring auto-grip technology.
Part #: SEAL-54Base -
SEAL 54" x 150' 5mil Print Shield Floor Guard Textured Vinyl Pressure Sensitive Laminating Film (PSFG62300A)
- Features an ultra-aggressive adhesive - perfect for tough-to-stick-to-media such as polyester based white films.
- Offers a durable, rich-textured finish.
- Ideal for creating vibrant, slip and scuff resistant floor graphics.
- Excellent choice for protecting trade show graphics and point-of-purchase displays from heavy wear and finger prints.
- Get 1 roll on every order.
Part #: PSFG62300A -
SEAL 54" x 200' 3.5mil Print Shield Standard UV Gloss Pressure-Sensitive Laminating Film (SPS62231)
- Premium-grade vinyl with an advanced water-based acrylic adhesive technology.
- Delivers reduced silvering and extended outdoor durability.
- Offers affordable protection against harmful UV rays, dirt and abrasion.
- Extend the life of your universal indoor applications for up to five years and outdoor applications for up to three years.
- Gloss finish and comes with a single paper release liner.
Part #: SPS62231 -
SEAL 5mil Print Shield Floor Guard Textured Vinyl Pressure Sensitive Laminating Film (SPSLF-5PSFGTVPSLF)
- Features an ultra-aggressive adhesive - perfect for tough-to-stick-to-media such as polyester based white films.
- Offers a durable, rich-textured finish.
- Ideal for creating vibrant, slip and scuff resistant floor graphics.
- Excellent choice for protecting trade show graphics and point-of-purchase displays from heavy wear and finger prints.
- Get 1 roll on every order.
Part #: SPSLF-5PSFGTVPSLF -
SEAL 6mil Jet Guard Deep Crystal Heat-Activated Laminating Film (SPJG-6DCHALF)
- Features a uniform crystal texture that is durable and scratch resistant.
- Creates a finish that reduces glare from reflected light.
- Used in conjunction with SEAL LightShield.
- Provides an ideal non-reflective.
- Scratch resistant finishing solution that hides finger prints and other blemishes that may occur due to heavy use and handling.
Part #: SPJG-6DCHALF -
SEAL CityLight Superior LX 8.5mil Translucent Printable Backlit Film (SEAL-CLSLX8.5TPBF)
- 8.5 mil front printable translucent backlit film
- Designed for use with solvent, eco-solvent, latex and UV-curable inks.
- For both indoor and outdoor use in a variety of lightbox and signage applications
- Get 1 roll on every order.
- Designed for use with latex and aqueous dye and pigment inks.
Part #: SEAL-CLSLX8.5TPBF -
SEAL Nolite 165 6.5mil Matte 30" x 10' Printable Display Media (SNL60129)
- Matte polyester media with a special inkjet coating for solvent, eco-solvent, latex and UV printers.
- Contains an integrated light-blocking layer for 100% opacity.
- Suitable for indoor use, as well as short-term outdoor use.
- Works great with a variety of banner and display applications including roll up banner stands and for trade show and POP graphics.
- Get 1 roll on every order.
Part #: SNL60129
