Product listing: Drytac ReTac WipeErase White 6mil 60" x 150' Dry-Erase Film with Removable Adhesive (RWE60150) to SealerSales 30" Retractable Nozzle Vacuum Sealer w/ Gas Flush (AVN-30)
-
Drytac ReTac WipeErase White 6mil 60" x 150' Dry-Erase Film with Removable Adhesive (RWE60150)
- Writing Surface:
- Use dry erase markers for any written text that you desire to be temporary and which can be wiped off easily with a dry, soft cloth.
- Use permanent markers for any writing or graph lines which you desire to be longer lasting and which can be removed with a solvent based cleaner.
- Press firmly when erasing using a circular motion.
- Periodic cleaning (as needed basis), rinse the entire writing surface with soapy water and then dry with a soft cloth.
Part #: RWE60150 -
Fastbind Customizable 11" x 17" Landscape 3-Ring Binder Kit - 5 Sets (CEBR-11x17)
- This kit is ready made for you to custom print and wrap to make your own custom 3-ring binders.
- Each kit includes:
- A 11" x 17" landscape blank case with pre-drilled ring mounting holes.
- A matching 3-ring mechanism.
- A nickel plated screw/post set.
Part #: CEBR-11x17 -
SealerSales Replacement Kit for WN-7510H Hand Impulse Sealer (RK-30H-WN7510H)
- Kit Includes: (2) 10mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
- For Use With: 30" W-Series Long Hand Sealer w/ 10mm Seal Width
- Quantity: 1 Set
- Part Number: RK-30H-WN7510H
- Kit Includes: (2) 10mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
Part #: RK-30H-WN7510H -
SealerSales Replacement Kit for TISH-305 Hand Impulse Sealer (RK-12H5-TISH-305)
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and (2) 1-1/8" PTFE cover.
- For Use With: 12" TISH-Series Hand Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-12H5-TISH-305
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and (2) 1-1/8" PTFE cover.
Part #: RK-12H5-TISH-305 -
Revo -Office 1.5mil 11.3" x 328' Gloss Laminating Film - 4 Rolls (LRG1102)
- Has been formulated and manufactured to run exclusively on the Revo-Office Automatic Laminator
- Has superior results for adhesion, clarity, and lay flat on digital and offset printing.
- Has been formulated to bond to toner based digital printing and have great adhesion even on finished sheets that have been trimmed out.
- Enhances your print and makes the colors "pop" to any image.
- Get 4 rolls on every order
Part #: LRG1102 -
12" x 18" 98pt Brown Book Board Binding Covers - 25pk (MYCBCBRW12X18-98)
- Cover Material: Book Board
- Recycled Content: 100%
- Thickness: 98pt
- Size: 12" x 18"
- Corners: Square
Part #: MYCBCBRW12X18-98 -
Daige Rollaguard Gloss Liquid Laminate - 1 Gallon (Rollaguard-G)
- For Use With Daige EZ Glide Liquid Laminators
- Costs significantly less per application than film laminates.
- Provides excellent UV, abrasion and water protection.
- Enhances the vibrancy of the inks.
- Media retains its flexibility.
Part #: Rollaguard-G -
8" x 8" 59pt Brown Book Board Binding Covers - 25pk (MYCBCBRW8X8-59)
- Cover Material: Book Board
- Recycled Content: 100%
- Thickness: 59pt
- Size: 8" x 8"
- Corners: Square
Part #: MYCBCBRW8X8-59 -
Safety Speed C4 Compact 50" Vertical Panel Saw (SS-C4)
- 3 1/4 Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 3/4" steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
Part #: SS-C4 -
Formax FD 2200-15 Data Integrity Scanning System (FD-2200-15)
- Single-camera system for Output Scanning on tabletop inserters or pressure sealers.
- Integrity and productivity reporting.
- Sequence check (incrementing or decrementing).
- Rated Speed: up to 40,000 items per hour.
- Report of all codes read.
Part #: FD-2200-15 -
Howard Model 45 Hand-Operated Hot Foil Stamping Machine (HD-45-Hand)
- Fast heating thermostatic heat control.
- Easy to read temperature gauge.
- Plug-in replacement heating element.
- Infinite foil feed adjustment (saves money).
- Precision engineered for easy operation.
Part #: HD-45-Hand -
SEAL 51" x 164' 2mil Print Mount 831 Pressure-Sensitive Mounting Adhesive (SPM8316008501)
- 2mil white paper fleece with clear permanent pressure sensitive acrylic adhesive.
- Features a long-fiber paper carrier making it ideal for a wide range of applications.
- For small, manual applications or for large images that need to be rolled and unrolled.
- Great for mounting irregular media, such as canvas, to rigid substrates.
- Passed the Photographic Activity Test (PAT), which certifies it as the safest choice for mounting photographs.
Part #: SPM8316008501 -
SEAL 51" x 200' 3mil Print Mount Removable Plus Pressure-Sensitive Mounting Adhesive (SPMRP62091)
- Constructed on a 3mil white opaque carrier having a permanent top adhesive.
- Bonds aggressively to the print, while the bottom adhesive securely bonds to the surface, yet is removable when required.
- Bond to a wide range of hard, smooth surfaces.
- Can be removed up to 6 months without leaving a residue.
- Ideal for floor graphics, window signage and counter top graphics.
Part #: SPMRP62091 -
SEAL 38" x 200' 2mil Print Mount Delta Pressure-Sensitive Mounting Adhesive (SPMD63162)
- 2mil adhesive with clear polyester carrier and single release liner.
- Excellent economical adhesive for digital prints.
- High initial tack that permanently bonds to both soft and rigid substrates.
- Ideal for use in indoor and short-term outdoor applications.
- Get 1 roll on every order.
Part #: SPMD63162 -
GFP 263C 63" Wide Format Cold Roll Laminator (263-C)
- Easy set-up and low maintenance
- Labor saving 3" Aluminum Quick-Grip film shafts.
- Variable roller gap to 1"
- Single pressure adjustment
- 38" output height.
Part #: 263-C -
SEAL 51" x 200' 2mil Write Clear Gloss Pressure Sensitive Laminating Film (SW2080A)
- 2mil glossy, pressure-sensitive polypropylene film.
- Affords high washability.
- Allowing you to turn virtually any image into a write-on/wipe-off chart or display.
- Get 1 roll on every order.
- Roll Width: 51"
Part #: SW2080A -
SEAL 38" x 200' 5mil Print Shield Floor Guard Textured Vinyl Pressure Sensitive Laminating Film (PSFG62294A)
- Features an ultra-aggressive adhesive - perfect for tough-to-stick-to-media such as polyester based white films.
- Offers a durable, rich-textured finish.
- Ideal for creating vibrant, slip and scuff resistant floor graphics.
- Excellent choice for protecting trade show graphics and point-of-purchase displays from heavy wear and finger prints.
- Get 1 roll on every order.
Part #: PSFG62294A -
SEAL 51" x 400' 4mil Print Shield Standard UV Matte Pressure-Sensitive Laminating Film (SPS62228)
- Premium-grade vinyl with an advanced water-based acrylic adhesive technology.
- Delivers reduced silvering and extended outdoor durability.
- Offers affordable protection against harmful UV rays, dirt and abrasion.
- Extend the life of your universal indoor applications for up to five years and outdoor applications for up to three years.
- Matte finish and comes with a single paper release liner.
Part #: SPS62228 -
Luxor 48" x 36" Magnetic Wall-Mounted Glass Board (WGB4836M)
- Measures 48"W x 36"H.
- Made of tempered 5/32" (4mm) thick glass.
- The magnetic surface allows for the hanging of documents, notes or magnetic markers.
- Super Clear Glass with bright white back painting is the ideal surface for wet/dry erase markers.
- Will not stain or ghost.
Part #: WGB4836M -
SEAL 51" x 250' 5mil ThermaShield Gloss Heat-Activated Laminating Film (STS62412)
- Economical, high-activation temperatures (185- 235°F) laminating film.
- Designed to protect and enhance images in a variety of display applications.
- Gloss finish and 5mil thick.
- Ideal for use on any SEAL multi-temperature roller laminator.
- Roll Width: 51"
Part #: STS62412 -
SEAL 51" x 500' 1.7mil ThermaShield Gloss Heat-Activated Laminating Film (STS62403)
- Economical, high-activation temperatures (185- 235°F) laminating film.
- Designed to protect and enhance images in a variety of display applications.
- Gloss finish and 1.7mil thick.
- Ideal for use on any SEAL multi-temperature roller laminator.
- Roll Width: 51"
Part #: STS62403 -
Formax AutoSeal FD 2006IL Print-Fold-Seal In-Line System (FD2006IL)
- Color Touchscreen Control Panel: Graphics-based and designed for easy, walk-up use.
- Print, Fold and Seal: One-step process eliminates excess document handling.
- Document Security: Enclosed paper path from printer to pressure sealer ensures security. Ideal for PIN notices or other confidential applications.
- Form Capabilities: Processes forms up to 14" in length.
- Printer Compatibility: Designed to work with a variety of printers. See specifications below.
Part #: FD2006IL -
SEAL 38" x 250' 3mil Jet Guard Gloss Heat-activated Laminating Film (SJGUV62103)
- Designed to provide UV protection, high-impact color enhancement, sharp image contrast.
- Durability needed to withstand the demands of your display’s environment.
- Low activation temperature of 185 - 205º F and has a gloss finish.
- Roll Width: 38"
- Roll Length: 250'
Part #: SJGUV62103 -
SEAL 41" x 400' 3mil PrintGuard UV Satin Matte Heat-Activated Laminating Film (SPGUV1660)
- Low-reflecting finish virtually eliminates glare while protecting prints from fading and handling.
- Offers UV protection and is an excellent choice for wall mounted displays.
- Constructed of a thin vinyl based film.
- Low activation temperature (185-195° F) solvent adhesive for maximum flexibility and conforming properties.
- Can be applied with any SEAL multi-temperature roller laminator.
Part #: SPGUV1660 -
SEAL 65 Pro MD 65" Wide Format Roll Laminator (SEAL-65ProMD)
- Dual IR Quartz heated rollers capable of running both hot and cold films.
- 65" working width to handle a wide range of media.
- Maximum operating speed of 15’/minute.
- 2" nip with precision pneumatic rollers for even speed and pressure to ensure smooth, wrinkle-free graphics.
- Bi-directional operation allows for efficient operating.
Part #: SEAL-65ProMD -
Formax Multi-Function Slitter-Cutter-Creaser (Atlas-TRIO15)
- High-Speed Cutting/Slitting: Up to eight 12" x 18" sheets per minute (24-up business cards)
- High-Speed Creasing: Up to 5,000 letter-size sheets per hour
- Powerful Feed System: Upper belt tri-suction feeding accurately handles large and heavy stocks
- 4" Color Touchscreen: Program and make adjustments easily with graphics-based menus and three modes - preset, manual and custom/flex
- Pre-Set and Programmable Jobs: Up to 150 custom jobs can be saved for quick recall
Part #: Atlas-TRIO15 -
Rotatrim Stand & Waste Catcher for 61" PowerTech Trimmer (62843)
- Constructed from a steel frame
- Sports a black finish
- Provides rigid support while operating at an ideal height of 34 inches
- For PowerTech rotary cutters
- Floor Stand Saves Space and Expense
Part #: 62843 -
Formax FD 2036 AutoSeal High-Volume Tabletop Pressure Sealer (FD2036)
- Operating Features:
- Color Touchscreen Control Panel: Graphics-based and designed for easy, walk-up use.
- Drop-In Feed System: A drop-in three roller feed system produces dependable feeding of forms with no paper fanning required.
- Hopper Capacity: Up to 350 forms.
- Fold Plates: Easy to adjust, with fine tune knobs for precision.
Part #: FD2036 -
Coverbind 5/8" Wrap-Around Navy Linen Thermal Binding Covers w/ Window - 50pk (08CBLW58NAVY)
- Made from a durable, linen-textured stock with a 5-3/8" x 3-9/16" window that shows your first page
- Gives a traditional look for your important documents and creates a professional look and feel.
- Can hold up to 150 sheets of 20lb documents.
- Spine Size: 5/8"
- Sheet Capacity (20 lbs.): Up to 150
Part #: 08CBLW58NAVY -
SealerSales 30" Retractable Nozzle Vacuum Sealer w/ Gas Flush (AVN-30)
- Gas-flush.
- 100% maintenance free venture vacuum pumps.
- Intuitive design.
- Extensive safety features.
- Rust-treated and powder-coated steel chassis.
Part #: AVN-30
