Product listing: Akiles VersaMac 4:1 Spiral Coil Binding Round Hole Die Set - Modular Punch Diesets (AVMD41) to Quartet 4' x 3' Aluminum Frame Sliding Door Enclosed Board

Akiles VersaMac 4:1 Spiral Coil Binding Round Hole Die Set - Modular Punch Diesets

Part number: AVMD41

Binding Style: Spiral Coil
Pitch: 4:1 (4 Holes Per Inch)
Hole Shape: Round
Part Number: AVM-D41

Your Price: $830.00

Drytac MHL Impervo UV 10mil 38" x 250' Hardcoat Laminating Film - UV Protected

Part number: MLL38210

MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

List Price: $1,525.06

Your Price: $1,067.54

You Save: 30%

Drytac MHL Impervo UV 5mil 38" x 250' Hardcoat Laminating Film - UV Protected

Part number: MLL38205

MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

List Price: $910.65

Your Price: $637.46

You Save: 29%

Drytac MediaShield Heatset Emerytex UV 5mil 51" x 328' Overlaminate

Part number: ET51328

MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.

Your Price: $875.70

Drytac MediaShield Heatset Matte UV 4mil 41" x 328' Overlaminate

Part number: MT41328

MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.

List Price: $1,048.06

Your Price: $733.64

You Save: 30%

Drytac MediaShield Heatset Satinex UV 3mil 51" x 328' Overlaminate

Part number: SX51328

MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.

List Price: $946.26

Your Price: $662.38

You Save: 30%

Drytac MediaShield Heatset Satinex UV 3mil 38" x 164' Overlaminate

Part number: SX38164

MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.

List Price: $494.36

Your Price: $346.05

You Save: 30%

Drytac Protac Polycarbonate UV 10.0mil 51" x 75' PS Overlaminate - Pressure Sensitive

Part number: PPC51075-10

Film Width: 51"
Film Length: 75'
Film Thickness: 10.0mil
Core Size: 3"

List Price: $857.92

Your Price: $600.54

You Save: 30%

Drytac Protac High Gloss UV 5.0mil 51" x 150' PS Overlaminate - Pressure Sensitive

Part number: PLHG3515

Film Width: 51"
Film Length: 150'
Film Thickness: 5.0mil
Core Size: 3"

List Price: $886.50

Your Price: $620.55

You Save: 30%

Drytac MHA 41" x 328' Multi Heat Activated Mounting Adhesive

Part number: MHA41328

Film Width: 41"
Film Length: 328'
Core Size: 3"
Filmic Carrier: None

List Price: $803.34

Your Price: $562.34

You Save: 29%

Drytac FaceMount 72" x 150' Optically Clear Mounting Adhesive

Part number: PSF72150

Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
Suitable for indoor and short-term outdoor use.
Film Finish: Clear Polyester

List Price: $1,856.20

Your Price: $1,299.34

You Save: 30%

Drytac MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

Part number: PSA26-38164

Roll Width: 38"
Roll Length: 164'
Core Size: 3"
Laminate Type: MediaTac Adhesive

List Price: $385.94

Your Price: $270.16

You Save: 29%

Formax OnSite FD 8402SC Strip-Cut Level P-2 Paper Shredder - Security Level

Part number: FD8402SC

Auto Start/Auto Stop: Optical sensor detects paper and starts operation automatically LED Control Panel with Load Indicator Door Safety Sensor: Motor stops automatically if cabinet door is opened Auto Reverse: In case of paper jam, built-in controls switch motor into reverse to clear jam Heat-Treated Steel Cutters: Specially ground for longevity and require minimal oiling High Quality Geared Motor: Powerful, effi cient AC geared-motor with heavy duty steel gears for high performance and minimal noise All-Metal Cabinet with casters Auto Sensor: When the waste bin is full, the motor stops automatically Lifetime Guaranteed Heavy-Duty Waste Bin Auto Cleaning: If shred capacity is decreased, press reverse button for 5 seconds and motor will run in reverse for 1 minute Oil Indicator: After every 4 hours of use, the control panel LED fl ashes to suggest oiling cutting blades for optimal performance Self-Diagnosis System: Records operation time, number of auto-reverse sequences, volume of paper shredded, and can display information for service technicians Thermal overload protection Safety Circuit Breaker ensures safe operation Accepts staples, paper clips and credit cards Manual Function: Can be used when shredding small sized paper or fi lms which can't be detected by the sensor EvenFlowTM Semi-Automatic Oiling System: Easy-to-use pump and copper nozzles keep the heat-treated steel blades in peak condition 1Year Manufacturer Warranty, Lifetime on Cutting Cylinders

Your Price: $1,615.50

Formax FD 8302CC Level P-5 Cross-Cut Paper Shredder - Security Level

Part number: FD8302CC

Auto Start/Auto Stop: Optical sensor detects paper and starts operation automatically Door Safety Sensor: Motor stops automatically if cabinet door is opened Auto Reverse: In case of paper jam, built-in controls switch motor into reverse to clear jam Heat-treated steel cutters are specially ground for longevity and require minimal oil High Quality Geared Motor: Powerful, efficient AC geared-motor with heavy-duty steel gears for high performance and minimal noise All metal cabinet with casters Auto Sensor: When the waste bin is full, the motor stops automatically Lifetime Guaranteed heavy-duty waste bin Cutter Auto Stop: If shredding is continuous for more than 30 minutes, cutter revolution stops automatically Thermal overload protection Safety Circuit Breaker ensures safe operation Optical Sensor Sensitivity Recovery: Can be reset by pressing the stop button for 7 second Accepts staples and paper clips Strip-cut model accepts CDs Manual Function: Can be used when shredding small sized paper or fi lms which can't be detected by the sensor 1Year Manufacturer Warranty, Lifetime on Cutting Cylinders

Your Price: $1,192.50

Komtrak Inspiral 32mm Black 19-Ring Spiral Combs - 100pk

Part number: INSPIRAL32BK100

Type: Komtrak Inspiral Color: Black Length: 11inch (19 rings) Size: 32mm (1-1/4inch ) Quantity: 100 Pieces (100 end claps included) Part Number: INSPIRAL32BK100

Your Price: $257.09

Navy Grain A3 Size Paper Binding Covers - 100pk

Part number: MYGRA3NV

Cover Type: Leather Grain/Sturdy Grain Paper Covers Cover Thickness: 90lb Cover Size: 297mmx420mm A3 Size Color: Navy Corners: Square Windows: No Quantity: 100 Pieces Part Number: MYGRA3NV

Your Price: $86.59

Renz DTP 340A Round Hole 5mm Pitch Spiral Coil Die Set - Modular Punch Diesets

Part number: RZ340A5MMRD

Pitch Pattern: 5mm (5:1) Hole Shape: Round Hole Size: 3.6mm Thumbcut: No Part Number: RZ340A5MMRD

Your Price: $1,633.00

Renz DTP 340A Round Hole 2:1 Pitch Ring Wire Die Set - Modular Punch Diesets

Part number: RZ340A21RD

Pitch Pattern: 2:1Hole Shape: Round Hole Size: 6mm Thumbcut: No Part Number: RZ340A21RD

List Price: $1,600.00

Your Price: $1,493.00

You Save: 6%

Renz DTP 340M Round Hole 5mm Pitch Spiral Coil Die Set - Modular Punch Diesets

Part number: RZ340M5MMRD

Pitch Pattern: 5mm (5:1) Hole Shape: Round Hole Size: 3.6mm Thumbcut: No Part Number: RZ340M5MMRD

Your Price: $1,633.00

Renz DTP 340M Round Hole 2:1 Pitch Ring Wire Die Set - Modular Punch Diesets

Part number: RZ340M21RD

Pitch Pattern: 2:1Hole Shape: Round Hole Size: 6mm Thumbcut: No Part Number: RZ340M21RD

Your Price: $1,493.00

Renz DTP 340M Rectangular Hole 2:1 Pitch Ring Wire Die Set - Modular Punch Diesets

Part number: RZ340M21REC

Pitch Pattern: 2:1Hole Shape: Rectangular Hole Size: 5.5mmx3.5mm Thumbcut: No Part Number: RZ340M21REC

Your Price: $1,353.00

Black 3/16" Foam Core Permanent Adhesive 32" x 40" Mounting Boards - 25pk

Part number: 550448

Board Type: Adhesive Coated Foam Core Mounting Boards Board Thickness: 3/16inch Board Size: 32inchx40inch Board Color: Black Quantity: 25 Per Box Part Number: 550448

Your Price: $360.39

White 4mm Corrugated Plastic 12" x 18" Adhesive Boards 10pk - Mounting Boards

Part number: CWSA1218

Board Type: Corrugated Plastic Mounting Boards with Adhesive Board Thickness: 4mm Board Size: 12inchx18inch Board Color: White Quantity: 10Sheets Per Box Part Number: CWSA1218

Your Price: $57.19

White 3/16" Gator Foam Mounting Boards 48" x 96" - 15pk

Part number: SGP-WG4896

Board Type: Gator Foam Mounting Boards (Uncoated) Board Thickness: 3/16inch Board Size: 48inchx96inch Board Color: White Quantity: 15 Per Box Part Number: SGP-WG4896

Your Price: $1,511.39

White 3/16" Gator Foam Mounting Boards 40" x 60" - 10pk

Part number: SGP-WG4060

Board Type: Gator Foam Mounting Boards (Uncoated) Board Thickness: 3/16inch Board Size: 40inchx60inch Board Color: White Quantity: 10 Per Box Part Number: SGP-WG4060

Your Price: $751.39

White 3/16" Gator Mounting Board 32" x 40" with Permanent Adhesive - 10pk

Part number: 550447G

Board Type: Gator Board With Adhesive Board Thickness: 3/16inch Board Size: 32inchx40inch Board Color: White Quantity: 10 Per Box Part Number: 550447G

Your Price: $518.59

Quartet 48" Double Sided Black Garment Rack - Cubical Solutions

Part number: QRT-20314

Double-sided 48inchx61.5inch freestanding solution with top shelf keeps coats and garments organized in public areas, meeting rooms and offices Holds up to 64 hangers separately and neatly on double-sided, evenly indexed rail Perforated top shelf provides additional storage Achieve stability on uneven floors with included levelers Contemporary design with radius edges and attractive, durable features complements any environment Pair with Quartet hangers (20803) for complete garment storage 100% Satisfaction Guaranteed GBC Quartet Part Number: 20314 Primary UPC: 034138203149

List Price: $725.16

Your Price: $341.52

You Save: 52%

Quartet 70" Solid Wood Walnut Finish Costumer - Cubical Solutions

Part number: QRT-2013

Hang coats, hats and other garments on attractive wood costumers, complete with four hooks for added organization Depend on the posts to stay straight and level with a sturdy, two-piece base, increasing balance Enjoy the attractive appearance of traditional brass-plated metal hooks Rich, walnut finish complements contemporary environments GBC Quartet Part Number: 2013 Primary UPC: 034138201305

List Price: $362.86

Your Price: $170.95

You Save: 52%

Quartet 6' x 4' Aluminum Frame Sliding Door Enclosed Board - Indoor Enclosed Boards

Part number: QRT-D2405

Highly durable 6feet W x 4feet H enclosed natural-cork bulletin board backed by high-density fiberboard secures documents with push pins Sliding glass door with showcase lock and low-profile handles allows for posting, protecting and easily updating important messages Delivers quality performance when communication is needed in any indoor environment Self-healing surface and high-density backing for maximum pin-holding power, ensuring documents stay securely posted Clearly display and protect information behind clear, tempered glass windows with durable showcase lock Satin finish anodized aluminum frame with full-length hinges complements any interior Includes 1 key per lock Also 100% Satisfaction Guaranteed GBC Quartet Part Number: D2405 Primary UPC: 034138009451

List Price: $2,229.98

Your Price: $1,049.39

You Save: 52%

Quartet 4' x 3' Aluminum Frame Sliding Door Enclosed Board - Indoor Enclosed Boards

Part number: QRT-D2401

Highly durable 4feet W x 3feet H enclosed natural-cork bulletin board backed by high-density fiberboard secures documents with push pins Sliding glass door with showcase lock and low-profile handles allows for posting, protecting and easily updating important messages Delivers quality performance when communication is needed in any indoor environment Self-healing surface and high-density backing for maximum pin-holding power, ensuring documents stay securely posted Clearly display and protect information behind clear, tempered glass windows with durable showcase lock Satin finish anodized aluminum frame with full-length hinges complements any interior Includes 1 key per lock Also 100% Satisfaction Guaranteed GBC Quartet Part Number: D2401 Primary UPC: 034138003244

Your Price: $698.20

Product listing: Akiles VersaMac 4:1 Spiral Coil Binding Round Hole Die Set - Modular Punch Diesets (AVMD41) to Quartet 4' x 3' Aluminum Frame Sliding Door Enclosed Board - Indoor Enclosed Boards (QRT-D2401)