Product listing: Fellowes Powershred 99Ms Micro-Cut Paper Shredder (4609001) to Tamerica 210EPB Electric Plastic Comb Binding Machine (T210EPB)
-
Fellowes Powershred 99Ms Micro-Cut Paper Shredder (4609001)
- Sheet Capacity (20 lb. paper): 14
- Cut Type: Micro-Cut
- Cut Size: 5/64" x 9/16"
- Security Level: P-5
- Speed (FPM): 11
Part #: 4609001 -
Duplo White Craft Paper Banding Tape for UP-240 Bander - 40 Rolls (AABUP240WHTTAPE)
- For Use With: Duplo UP-240 Bander
- Width: 30mm
- Length: 500 feet
- Quantity: 40 Rolls
- For Use With: Duplo UP-240 Bander
Part #: AABUP240WHTTAPE -
Challenge Handy Padder Portable Padding Press (CH-HANDYPADDER)
- Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
- Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
- Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
- Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
- Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
Part #: CH-HANDYPADDER -
Sooper Corner Rounder with 1/4"and 3/8" Die Set (SR3000)
- Includes 1/4" and 3/8" interchangeable radius blades.
- Cuts Up to .080 Aluminum.
- Up to 1" Card Stock, Plastics, Magnetic sheets and More.
- Heavy Duty Cast Iron Base.
- Drop down foot holds material in place while cutting.
Part #: SR3000 -
Drytac MHL Frost UV 6mil Low Temp Laminating Film (MZ206)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MZ206 -
Quartet Gray 4' x 3' Radius Fabric 2 Door Enclosed Bulletin Board (QRT-2364L)
- Durable grey fabric enclosed bulletin board backed by high-density fiberboard secures documents tight
- 2 locking shatterproof acrylic doors protect postings and makes updating easy
- Perfect for high-traffic areas, such as employee lounges
- 4'W x 3'H
- Self-healing surface will not fade or crumble and high-density backing holds push pins tightly in place
Part #: QRT-2364L -
23 Gauge Yellow 11" x 8.5" Poly Round Ring Binders - 100pk (MYPBYW23)
- Three ring metals include opening and closing boosters.
- Standard Black Rivets (White and Nickel color options are available upon request at no additional cost).
- Made of durable high density polyethylene plastic.
- Accomodates 11" x 8.5" letter size paper.
- Ring Type: Round Ring
Part #: MYPBYW23 -
Logan Simplex Elite 60" Mat Cutter from Graphics (760-1)
- 60" (152cm) capacity
- Multi-material mat cutting system with parallel mat guide in aluminum channels
- Hinged guide rail, pull style bevel cutting head and #701-1 Straight Cutter
- 32" (81cm) scaled squaring arm with stop for downsizing
- Two guide rail production stops
Part #: 760-1 -
Proton 1100 Magnetic Media Wand Degausser (PROTON1100)
- For disk drives, diskpacks, drum memories and other magnetic media.
- Designed to provide maximum security level media degaussing for a wide range of magnetic media.
- Conventional magnetic recording devices (recording heads) cannot provide the flux density required to totally erase magnetic signatures.
- The magnetic information remains in the media after conventional erasing techniques and reformatting procedures.
- Only a high-energy magnetic circuit that provides a full-cycle (+ â + -) field can reliably erase this remnant magnetic information to a full security level.
Part #: PROTON1100 -
MBM Triumph 1038 15" Tabletop Paper Cutter - KU0470 (MB-1038)
- Solingen steel blade set may be resharpened
- Transparent Lexan ® safety guard automatically covers blade in every position
- Solid hand clamp, independent of blade handle
- Precision side guides scaled in inches and metric system
- Lockable back gauge
Part #: MB-1038 -
Clear 1.7mil PlatinumPET Gloss Low Melt Laminating Film - 27" x 3000' (3 Inch Core) (MYLFPGI3270003000)
- Film Type: Premium Low Melt
- Thickness: 1.7 Mil
- Roll Width: 27"
- Roll Length: 3000'
- Film Finish: Gloss
Part #: MYLFPGI3270003000 -
HSM Securio AF100 Auto-Feed 100-Sheet Cross-Cut Shredder (HSM2063)
- Made in Germany. The high quality materials and proven HSM "Made in Germany" quality guarantee you are receiving a safe and durable machine â and also 3 years warranty.
- Steel cutting rollers with lifetime warranty. The hardened steel cutting rollers with a lifetime warranty can easily cope with staples and paper clips and guarantee durability.
- Nanogrip for reliable sheet intake. The document shredder with autofeed has a specially developed intake and transport rollers which use Nanogrip Technology. This enables sheet after sheet to be pulled in securely from the stack of paper.
- Useful dual function. During the autofeed stack processing, it is possible to manually feed paper at the same time.
- Simple emptying. To empty the waste container, the housing top can be easily removed â a practical, recessed grip facilitates handling.
Part #: HSM2063 -
GBC Arctic Clear Arctic Dura Mount 55" x 300' (3" Core) (9300860)
- Film Type: GBC Arctic Dura Mount
- Thickness: n/a
- Roll Width: 55"
- Roll Length: 300'
- Film Finish: n/a
Part #: 9300860 -
SealerSales 30" Bar Sealer Shrink Wrapping Starter Kit (SWK-30-S3)
- Standard sets comes complete with a bar sealer with film roller (W-Series), heat gun (HG-1), and shrink film (500 ft. roll, 75 gauge). Powerstrip not included. Package ships as two pacakges.
- There are three steps involved in shrink packaging:
- Insert the item between the fold of film or into a shrink bag or tubing.
- Use a sealer to cut off the excess film and seal by lowering the sealing bar of the sealer.
- Shrink the film on all sides with heat gun or shrink tunnel.
Part #: SWK-30-S3 -
1/2" White 23 Gauge 5.5" x 8.5" Poly Round Ring Binders - 100pk (MYPBWHT23120H)
- Three ring metals include opening and closing boosters.
- Standard White Rivets (White and Nickel color options are available upon request at no additional cost).
- Made of durable high density polyethylene plastic.
- Accomodates 8.5" x 5.5" half size paper.
- Ring Type: Round Ring
Part #: MYPBWHT23120H -
1/2" Yellow 23 Gauge 5.5" x 8.5" Poly Round Ring Binders - 100pk (MYPBYW23120H)
- Three ring metals include opening and closing boosters.
- Standard Yellow Rivets (Yellow and Nickel color options are available upon request at no additional cost).
- Made of durable high density polyethylene plastic.
- Accomodates 8.5" x 5.5" half size paper.
- Ring Type: Round Ring
Part #: MYPBYW23120H -
23 Gauge Black 5.5" x 8.5" Poly Round Ring Binders - 100pk (MYPBBLK23H)
- Three ring metals include opening and closing boosters.
- Standard Black Rivets (White and Nickel color options are available upon request at no additional cost).
- Made of durable high density polyethylene plastic.
- Accomodates 8.5" x 5.5" half size paper.
- Ring Type: Round Ring
Part #: MYPBBLK23H -
White 26 Bit Composite Proximity Cards - 100pk (MYIDBPROX26C)
- Formatted as standard 26 bit rate
- Card Size is credit card size or CR-80
- Quantity of 100 cards per pack.
- MyBinding Part Number MYIDBPROX26C
- Formatted as standard 26 bit rate
Part #: MYIDBPROX26C -
Rapid 106 Electronic Stapler (Rapid106)
- Strength and depth is adjustable
- Action by foot pedal or bump switch
- Easy and quiet operation
- Safety forward design prevents operation when shield is up
- Foot pedal included
Part #: Rapid106 -
GBC / Swingline P210E Electric Proclick Binding Machine (7708180)
- Punch Method: Electric
- Punching Capacity: 15 Sheets (20lb Bond) Per Punch.
- Max Document Thickness: 110 Sheets (5/8" Thick)
- Document Size: 11"
- Binding Spine Size Guide: Yes
Part #: 7708180 -
1-1/2" Black 4:1 Metal Spiral Coil Binding Spines - 100pk (MYMSC112BK)
- Color: Black
- Material: Nylon Coated Steel
- Diameter Size: 1-1/2"
- Pitch: 4:1
- Capacity: 330 Sheets (20# Bond)
Part #: MYMSC112BK -
1-1/2" White 4:1 Metal Spiral Coil Binding Spines - 100pk (MYMSC112WH)
- Color: White
- Material: Nylon Coated Steel
- Diameter Size: 1-1/2"
- Pitch: 4:1
- Capacity: 330 Sheets (20# Bond)
Part #: MYMSC112WH -
Afinia Label L701/L801/L801 Plus Replacement Printhead (AFN22537)
- Printer Compatibility: Afinia Label L701 , Afinia Label L801 , Afinia Label L801 Plus
- Features: Memjet VersaPass Thermal Inkjet Printhead featuring Memjet Waterfall Printhead Technology® 11 Integrated Circuit (IC) Chips â 70,400 nozzles (6,400 per IC Chip)
- Ink Formula: Memjet VersaPass G Dye Ink, Memjet VersaPass N Dye Ink (UV & Water-Resistant)
- Life Expectancy: Up to 3 L of combined ink depending on environmental conditions
- Part Number: AFN22537, 22537
Part #: AFN22537 -
Afinia Label L901/CP950/L901 Plus Replacement Printhead (AFN28025)
- Features: Memjet VersaPass Thermal Inkjet Printhead featuring Memjet Waterfall Printhead Technology® 11 Integrated Circuit (IC) Chips â 70,400 nozzles (6,400 per IC Chip)
- Printer Compatibility: Afinia L901 / L901 Plus / CP950 label printers
- Ink Formula: Memjet VersaPass G Dye Ink, Memjet VersaPass N Dye Ink (UV & Water-Resistant)
- Life Expectancy: Up to 3 L of combined ink depending on environmental conditions
- Part Number: AFN28025, 28025
Part #: AFN28025 -
MasterBind Master Set of 4mm Standard Fonts USA (1161-D4000)
- Includes: Capital and small caps letter, numerical numbers and symbols
- Font Sizes: 4mm (0.16")
- Part Number: 1161-D4000
- Capital and small caps letter, numerical numbers and symbols
- 4mm font size
Part #: 1161-D4000 -
MasterBind Master Set of 9mm Standard Fonts USA (1161-D5000)
- Includes: Capital and small caps letter, numerical numbers and symbols
- Font Sizes: 9mm (0.35")
- Part Number: 1161-D5000
- Includes capital and small caps letter, numerical numbers and symbols
- 9mm font size
Part #: 1161-D5000 -
SEAL 38" x 150' 3mil PrintGuard UV Satin Matte Heat-Activated Laminating Film (SPGUV1316-3)
- Low-reflecting finish virtually eliminates glare while protecting prints from fading and handling.
- Offers UV protection and is an excellent choice for wall mounted displays.
- Constructed of a thin vinyl based film.
- Low activation temperature (185-195° F) solvent adhesive for maximum flexibility and conforming properties.
- Can be applied with any SEAL multi-temperature roller laminator.
Part #: SPGUV1316-3 -
Keencut 44" Simplex Sheet Material Cutter - SIM110 (60455)
- High precision accuracy in a portable Ronnie Roberts, Suffolk Printing cutter
- Lightweight but robust design
- Versatile cutter for a wide range of materials
- Safety by design
- Reduces cutting time
Part #: 60455 -
Akiles CoilMac ER+ Plus Oval Hole Coil Binding Machine with Inserter (Coilmac-ER+)
- Extended Single Punching Length (13") : With open ends & continuous punch guide to easily punch documents of any length (up to 26").
- High Volume Punch Capacity : Suggested up to 20-sheet* for 20 lbs paper, or 2.6mm (28-sheet equivalent)** for hardboard, in 13" length (53 holes).
- Super Strength Punch Mechanism with exclusive "Precision Guiding SystemTM" Blade Set : Cast-hardened & heat-treated steel dies provide superior strength & hardness. Exclusive "precision guiding system" guarantees a sharp & clean perforation everytime.
- Top Electric Roller Coil Inserter (Foot Pedal Operated) : This easy to use and durable roller makes coil inserting surprisingly fast and easy. It is strategically placed on the left side of the machine so your coil will clear the punch handle while you are inserting.
- Side Margin Control : Provides an evenly centered punch for all document sizes.
Part #: Coilmac-ER+ -
Tamerica 210EPB Electric Plastic Comb Binding Machine (T210EPB)
- Heavy duty metal construction.
- Punches up to 10,000 sheets/hr up to 12" in length. And binds up to 250 books/hr up to 2" thick.
- Push button punching operation
- 7 Disengageable Dies
- Hollow ground self-sharpening dies
Part #: T210EPB
