Product listing: Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON) to GBC WireBind 3:1 Round Hole MP2500ix Die Set (7704590)
-
Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON)
- High Capacity: Holds up to 31" of paper for production padding environments
- Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
- Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
- Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
- Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
Part #: CH-PADDYWAGON -
GoECOlife OPTIMUS SERIES 8-Sheet Level 7 Nanocut Shredder (GHC85P-BLK)
- The GoECOlife Nano-Cut Shredder offers "top secret" security level shredding in a personal sized machine. The 1 x 5mm nano-cut shred size will render a single letter size sheet of paper into over 12,000 micro particles – the smallest shred size commercially available today. It will shred up to 8 sheets at a time quickly at 9.1 feet per minute.
- Ultra-quiet operation won’t disturb those nearby. The minute nano-cut particles affords increased bin capacity in the large 6.8 gallon bin which means you empty less often.
- Convenient pull-out basket design makes emptying quick and easy.
- GoECO Energy-Saving Technology virtually eliminates vampire energy waste. This machinewill automatically power down if left idle – not just “asleep” but will consume ZERO electricity when OFF.
- Unique front loading under desk design.
Part #: GHC85P-BLK -
Quartet 6' x 4' Indoor Enclosed Cork Bulletin Board (QRT-2367)
- Durable natural-cork enclosed bulletin board backed by high-density fiberboard secures documents tight
- 3 locking shatterproof acrylic doors protect postings and makes updating easy
- Perfect for interior high-traffic areas, such as employee lounges
- 6'W x 4'H
- Self-healing surface will not fade or crumble and high-density backing holds push pins tightly in place
Part #: QRT-2367 -
Akiles DuoMac 321 2:1 and 3:1 Pitch Wire Binding Machine (AKDUOMAC321)
- With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
- Punch handles
- Punch Throat & Ruler
- Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
- Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
Part #: AKDUOMAC321 -
SEAL 51" x 400' 4mil Print Shield Standard UV Matte Pressure-Sensitive Laminating Film (SPS62228)
- Premium-grade vinyl with an advanced water-based acrylic adhesive technology.
- Delivers reduced silvering and extended outdoor durability.
- Offers affordable protection against harmful UV rays, dirt and abrasion.
- Extend the life of your universal indoor applications for up to five years and outdoor applications for up to three years.
- Matte finish and comes with a single paper release liner.
Part #: SPS62228 -
Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator (DTJM18)
- Max Laminating Width: 18.25 inches (464mm)
- Width: 25.5 inches (648mm)
- Depth: 11.75 inches (299mm)
- Height: 13 inches (330mm)
- Weight: 51 lbs (23 kg)
Part #: DTJM18 -
Baumfolder Lawson 52" MPU-52 Pacemaker III IV Blade (JH-39450)
- Compatible Models: Baumfolder, Lawson 52", MPU-52, Pacemaker III, Pacemaker IV
- Material: Standard Inlay
- Holes: 33
- Length: 64"
- With: 5"
Part #: JH-39450 -
Black 3/16" Foam Core Permanent Adhesive 40" x 60" Mounting Boards - 25pk (550463B)
- Board Type: Adhesive Coated Foam Core Mounting Boards
- Board Thickness: 3/16"
- Board Size: 40" x 60"
- Board Color: Black
- Quantity: 25 Per Box
Part #: 550463B -
Quartet 4' x 16' Porcelain Magnetic Classroom Whiteboard (QRT-PPA416)
- Porcelain whiteboard surface will not stain, ghost, scratch or dent
- Magnetic quality allows whiteboard to also be used as a magnetic bulletin board
- Designed for heavy use in busy educational environments
- Easy-to-clean writing surface requires minimal use of Quartet® cleaning solutions
- Cradle to CradleCM Silver certified porcelain, certified for material content, recyclability and sustainable manufacturing processes
Part #: QRT-PPA416 -
3mil Matte Low Melt Laminating Film - 25" x 2000' (3 Inch Core) (CBD3M252000-3)
- Film Type: Premium Low Melt
- Thickness: 3 Mil
- Roll Width: 25"
- Roll Length: 2000'
- Film Finish: Matte / Satin
Part #: CBD3M252000-3 -
Swingline ClassicCut CL560m 30" Square Maple Table Trimmer (SWI-1174)
- Guillotine cutting of up to 15 sheets of 20 lb. paper at once
- Table legs detach to use trimmer on a desk or counter
- Protective guard rail safety feature plus blade latch hook to lock blade
- 30" square
- Limited 10-year warranty
Part #: SWI-1174 -
Dahle Premium 21.5 Inch Heavy Duty Guillotine Cutter (567)
- Cuts up to 35 sheets of paper at a time
- Ground self-sharpening blade made of Solingen Steel
- Sturdy blade will not fly up or drop down unexpectantly
- Rotary guard covers the blade throughout the entire cutting process-The ultimate safety device
- Automatic paper clamp (models 561/565)
Part #: 567 -
GBC Colorcoil 4:1 .2475 Pitch Magnapunch and 660id Die Set (7707040)
- Type: GBC Magnapunch / Ibico 660ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC ColorCoil
- Pitch: 4:1 Pitch (0.2475)
- Hole Shape: Round
Part #: 7707040 -
GBC CombBind Magnapunch and 660id Die Set (7707020)
- Type: GBC Magnapunch / Ibico 660ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC CombBind with 3 Position Adjustable Back Gauge
- Pitch: 9/16" Pitch
- Hole Shape: Rectangle
Part #: 7707020 -
GBC WireBind 2:1 Round Hole Magnapunch and 660id Die Set (7707160)
- Type: GBC Magnapunch / Ibico 660ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC WireBind
- Pitch: 2:1 Pitch
- Hole Shape: Round
Part #: 7707160 -
GBC WireBind 2:1 Square Hole Magnapunch and 660id Die Set (7707130)
- Type: GBC Magnapunch / Ibico 660ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC WireBind
- Pitch: 2:1 Pitch
- Hole Shape: Square
Part #: 7707130 -
GBC WireBind 3:1 Square Hole Magnapunch and 660id Die Set (7707100)
- Type: GBC Magnapunch / Ibico 660ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC WireBind
- Pitch: 3:1 Pitch
- Hole Shape: Square
Part #: 7707100 -
Mactac Permacolor RAYZor 1.5mil Clear Gloss Cast Vinyl Overlaminate (MACTAC-LF364G)
- Features and Benefits:
- Built-in UV protection
- Optically clear gloss and gloss finishes
- Part of the B•free® application warranty
- Five to seven years outdoor durability
Part #: MACTAC-LF364G -
MBM Triumph 1071 28.5" Tabletop Paper Cutter - KU0474 (MB-1071)
- Solingen steel blade set may be resharpened
- Transparent Lexan ® safety guard
- Solid hand clamp, independent of blade handle
- Precision side guides scaled in inches and metric system
- Lockable back gauge
Part #: MB-1071 -
MBM 98M Manual Tabletop Paper Folder (FO0600)
- Simple, push-button operation.
- Digital control panel.
- Programmable counter with batch and total functions.
- Color-coded fold plate graphics for quick and easy set-up, and ensure accurate placement of paper stops.
- The powered exit conveyor and exit tray extension allow neat stacking of folded sheets.
Part #: FO0600 -
Black 3/16" Foam Core 48" x 96" Mounting Boards - 25pk (550440)
- Board Type: Uncoated Foam Core Mounting Boards
- Board Thickness: 3/16"
- Board Size: 48" x 96"
- Board Color: Black
- Quantity: 25 Per Box
Part #: 550440 -
Keencut 100" Table Edge Rotary Cutter (TE) (60633)
- Unique sub-surface monorail bearing system.
- Twin rotary blades and full-length fixed blade strip.
- Large diameter cutting wheels to prevent them from jumping up on top of the blade.
- Heavy duty plastic cutting head.
- Two integral roller clamps and full-length fixed blade strip.
Part #: 60633 -
Logan Framer's Edge Elite 48" Professional Mat Cutter from Graphics (655-1)
- 48" (122cm) Capacity
- Heavy duty model for serious artists and framers
- Includes 32" (81cm) scaled and 9" (23cm) non-scaled squaring arms
- Improved cutting head with smooth ball bearing action
- With parallel mat guide in aluminum channels
Part #: 655-1 -
Daige Maxit 12.5" Adhesive Coater (MX12)
- Great for Adhering:
- Hard covers
- Duplexed business cards
- Wide format prints
- Custom invitations
Part #: MX12 -
SealerSales ShrinkFast Model 998 Industrial Shrink Wrap Heat Gun (Model998)
- Powerful - With 245,000BTUs of power, you can shrink wrap a 40" x 48" x 60" pallet in less than two minutes.
- Lightweight - Sleek design and weighs only 2.2lbs. 998's ergonomic design and fan shaped combuster lead to an even and steady heat pattern for constant shrink wrapping.
- Safe - UL Listed with built-in safety mechanisms. "Dead man" trigger designed to automatically shut off the flame once trigger is released.
- Flexible - Extensions available in 4' and 6'.
- Durable - Full 1 year manufacturers' warranty on all parts and labor.
Part #: Model998 -
Swingline ClassicCut CL800pro 11.75" Guillotine Paper Cutter (SWI-1500)
- Guillotine cutting of up to 150 sheets of 20 lb. paper at once; 11 3/4" cutting length
- Full-width handle for ultimate leverage
- Battery powered light illuminates cutting area to increase accuracy
- Limited 10-year warranty
- Cut Length: 11.75"
Part #: SWI-1500 -
Drytac MHA 51" x 328' Multi Heat Activated Mounting Adhesive (MHA51328)
- Film Width: 51"
- Film Length: 328'
- Core Size: 3"
- Filmic Carrier: None
- Adhesive Bond: Permanent:
Part #: MHA51328 -
GBC CombBind Die Set for MP2500ix / 640ID (7704450)
- Type: GBC MP2500ix / Ibico 640ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC CombBind
- Pitch: 9/16" Pitch
- Hole Shape: Rectangle
Part #: 7704450 -
GBC WireBind 2:1 Round Hole MP2500ix Die Set (7704470)
- Type: GBC MP2500ix / Ibico 640ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC WireBind
- Pitch: 2:1 Pitch
- Hole Shape: Round
Part #: 7704470 -
GBC WireBind 3:1 Round Hole MP2500ix Die Set (7704590)
- Type: GBC MP2500ix / Ibico 640ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC WireBind
- Pitch: 3:1 Pitch
- Hole Shape: Round
Part #: 7704590
