Product listing: Lassco Wizer Cornerounder CR-60 1-1/2" Radius Table Assembly (60112TA) to Black 3/16" Gator Mounting Board 36" x 48" with Repositional Adhesive - 5pk (550460G-R)
-
Lassco Wizer Cornerounder CR-60 1-1/2" Radius Table Assembly (60112TA)
- Heavy duty construction
- Available in four sizes
- Radius: 1-1/2"
- Part Number: 60-112TA
- Heavy duty construction
Part #: 60112TA -
Lassco Wizer Cornerounder CR-60 1/2" Radius Table Assembly (6012TA)
- Heavy duty construction
- Available in four sizes
- Radius: 1/2"
- Part Number: 60-12TA
- Heavy duty construction
Part #: 6012TA -
Quartet Infinity Glass 8' x 4' Black Magnetic Frameless Dry-Erase Board (QRT-G9648B)
- Tempered dry-erase marker board with 15 year warranty will not stain, ghost, scratch or dent
- Ideal for heavy use in spaces with moderate traffic
- Magnetic quality allows secure hanging of papers from glass surface with rare earth magnets
- Frameless board design blends seamlessly into any environment
- Black colored glass board surface clearly displays white and neon color dry-erase ink
Part #: QRT-G9648B -
Mactac Permacolor PermaPrint White 51" x 150' Perm/Perm Back Mounting Film (IP5002)
- Features and Benefits:
- One paper release liner allows for fast lamination
- Typical Uses:
- Mounting of images to black gator, Sintra and other typical mounting substrates
- Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
Part #: IP5002 -
Xyron 4400 Two Sided Standard Laminating Roll Set 42" x 300' (DL4300-300)
- Roll Set Type: Two Sided Standard Laminate
- Width: 42"
- Length: 300'
- Part Number: DL4300-300
- Roll Set Type: Two Sided Standard Laminate
Part #: DL4300-300 -
DFG Coil and Comb 2-in-1 Punching and Binding Machine (CoilComb21)
- 20 sheets single punching capacity (20 lbs. paper).
- 12" width punching capacity with open sides for even wider documents.
- All punch pins can be independently disengaged, to allow the punching of any size document while preventing partial holes.
- Binding capacity: From 3/16" to 2".
- Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
Part #: CoilComb21 -
Replacement Blade for Zamboni Ice Resurfacer (JH-80500)
- Compatible Models: Ice Resurfacer
- Material: Standard Inlay
- Holes: 20
- Length: 77"
- With: 5"
Part #: JH-80500 -
White 3/16" Gator Mounting Board 24" x 36" with Permanent Adhesive - 10pk (550454G)
- Board Type: Gator Board with a pressure sensitive or cold adhesive
- Board Thickness: 3/16"
- Board Size: 24" x 36"
- Board Color: White
- Quantity: 10 Per Box
Part #: 550454G -
Quartet Prestige 2 8' x 4' Magnetic Steel White Board Graphite Frame (QRT-TEM548G)
- Total Erase® magnetic whiteboard with 20 year warranty has a durable surface that resists ghosting and staining
- Best suited for moderate use in spaces with regular traffic
- Erases cleanly and will remain pristine with only occasional maintenance
- Magnetic feature allows whiteboard to double as a magnetic bulletin board
- Whiteboard surface is printed with a light grid pattern, only visible up close, to help keep writing aligned
Part #: QRT-TEM548G -
Quartet Prestige 2 8' x 4' Magnetic Steel White Board Silver Frame (QRT-TEM548A)
- Total Erase® magnetic whiteboard with 20 year warranty has a durable surface that resists ghosting and staining
- Best suited for moderate use in spaces with regular traffic
- Erases cleanly and will remain pristine with only occasional maintenance
- Magnetic feature allows whiteboard to double as a magnetic bulletin board
- Size: 8' x 4'
Part #: QRT-TEM548A -
Drytac Protac Scribe 2.5mil 51" x 150' Dry-Erase PS Overlaminate (PSC51150)
- Film Width: 51"
- Film Length: 164'
- Film Thickness: 2.5mil
- Core Size: 3"
- Finish: Dry-erase / Gloss
Part #: PSC51150 -
Luxor 48" Dark Walnut High-Speed Crank Adjustable Stand Up Desk (STANDCF48-BK/DW)
- High speed crank allows for rapid adjustment from sitting to standing.
- Crank handle quickly raises the desk height between 32.6" and 48.5" (with casters).
- Crank handle quickly raises the desk height between 29.6" and 45.5" (with glides).
- Spacious 48" x 29.5" desktop provides plenty of room for multiple monitors.
- Melamine top with dark walnut finish.
Part #: STANDCF48-BK/DW -
Challenge Titan 230 High Speed Steel Replacement Blade - 42007 (JH-31930HSS)
- Compatible Cutters: Challenge Titan 230 or 230 w/ Color Touch Screen Control
- Type of Blade: High Speed Steel
- Dimensions (L x W x T): 26.750" x 3.000" x .375"
- Holes/Slots: 5H
- Type of Blade: High Speed Steel
Part #: JH-31930HSS -
Swingline Black High Capacity Electric Stapler (SWI-69270)
- Easy-to-use precision alignment guide ensures accuracy
- 70 sheet stapling capacity using simple staple cartridge, comes pre-packed with 5,000 staples
- Durable construction; suction cup feet provide stability
- Flat clinch stapling design allows for neater stacking of stapled papers
- 100% Performance Guarantee
Part #: SWI-69270 -
Akiles Coilmac Plus Manual Oval Hole Coil Binding Machine (Coilmac-M+)
- Fully Disengageable Punch Pins: For a clean punch with virtually any document length.
- Punching Margin Control: Provides the correct punch-margin-depth for each coil size and maximizes the document's tear resistance.
- Side Margin Control: Provides an evenly centered punch for all document sizes.
- Coil Selector
- Open Punching Throat and Continuous Punching Guide
Part #: Coilmac-M+ -
GBC Octiva Hot Mount Adhesive 38" x 150' (3" Core) (9300712)
- Film Type: GBC Hot Mount Adhesive
- Thickness: n/a
- Roll Width: 38"
- Roll Length: 150'
- Film Finish: n/a
Part #: 9300712 -
Dahle Replacement Blade for 846 Guillotine Stack Cutter - 1pk (73621057)
- Over time the blade of your paper cutter can become dull or can be nicked.
- Designed to provide superior performance and is guaranteed to fit on your Dahle Rolling Trimmer.
- Has a self-sharpening precision graduated edge which gives you the ability to shave the smallest piece from the edge of your paper.
- Product Type: Replacement Blade
- Designed for: Dahle 846 Guillotine Cutter
Part #: 73621057 -
Mandelli Miracle LMM 82 32" Cut Replacement Blade (JH-42320)
- Compatible Models: Mandelli, Miracle LMM 82
- Material: Standard Inlay
- Holes: 7
- Length: 39.96"
- With: 3.543"
Part #: JH-42320 -
Quartet 96" x 96" Wall or Ceiling Mount Projection Screen (QRT-696S)
- White matte, high-resolution projection screen enhances important presentations
- 96" W x 96" H
- Hangs from wall with optional wall bracket (AW6Q) or ceiling and blends into any interior
- Reliable, heavy-duty screen retraction springs
- Flame retardant and mildew resistant for long-term value
Part #: QRT-696S -
SealerSales 8" Portable Double Impulse Sealer w/ 5mm Seal Width (FKR-200A)
- 8" sealing length and 5mm seal width
- Lightweight & easy to operate.
- Impulse heat w/ timer.
- Double impulse sealing.
- Recommended for poly materials such as polyethylene, polypropylene, PVC, PE laminated paper, and aluminum foil.
Part #: FKR-200A -
Akiles Full Bleed CardMac Plus Electric Business Card Slitter (CardMacPlus)
- Perfect-Angle Easy Feeder. Allows operator to properly position before cutting, ensuring perfect cards every time.
- Two Pass Design. Cuts and Slits 10 full bleed business cards from a letter size sheet in two passes.
- Hardened Steel Blades. Allow you to cut up to 350 gsm cardstock.
- Paper Stabilizers. Ensures proper positioning as paper feeds into blades.
- Adjustable Side Margins. Easily make micro-adjustments to accomodate off-register jobs.
Part #: CardMacPlus -
Black 3/16" Foam Core Permanent Adhesive 32" x 40" Mounting Boards - 25pk (550448)
- Board Type: Adhesive Coated Foam Core Mounting Boards
- Board Thickness: 3/16"
- Board Size: 32" x 40"
- Board Color: Black
- Quantity: 25 Per Box
Part #: 550448 -
Mactac IMAGin 3.7mil 54" x 164' Matte White High Tack Permanent Print Vinyl (JX5828HTO)
- Features and Benefits:
- 3.7-mil matte white vinyl
- Four year outdoor durability
- Special high-tack, opaque, solvent-based adhesive for di¸cult applications
- Brilliant white face for truer, brighter colors
Part #: JX5828HTO -
Dahle Premium 15.5 Inch Heavy Duty Guillotine Cutter (565)
- Replacement Blades: 1620022273
- Cuts up to 35 sheets of paper at a time
- Ground self-sharpening blade made of Solingen Steel
- Sturdy blade will not fly up or drop down unexpectantly
- Rotary guard covers the blade throughout the entire cutting process-The ultimate safety device
Part #: 565 -
Heavy Duty 16-Roll Storage Mobile Rack for 3" Core Rolls (MR16)
- Holds 16 rolls of 3" core roll media
- Holds media rolls from 12" to 60" wide
- Carrying capacity of up to 1000lbs
- Heavy square tube construction for excellent durability
- Powder coated silver vein finish.
Part #: MR16 -
White 24" x 36" Thermal Adhesive Gator Boards - 10pk (MYB62340G)
- 3/16" thick Gator foam board
- Resists bowing and is stronger than regular Foam Board
- Low temperature adhesives safe for all inkjet and other prints
- Run at 240 degrees and 2 feet per minute in roll laminators
- Size: 24" x 36"
Part #: MYB62340G -
FP 1-XLS Paper Hole Drill with Moving Table (MYFP1XLS)
- Simple and easy multi-hole punching process by sliding the table
- Punch up to an impressive 300 sheet of document at one time
- Very little pressure needed to operate
- Capable to handle up to 14" wide paper
- Features a sliding table with adjustable stops providing an efficient work environment
Part #: MYFP1XLS -
White 3/16" Foam Core Permanent Adhesive 30" x 42" Mounting Boards - 25pk (550447AE)
- Board Type: Adhesive Coated Foam Core Mounting Boards
- Board Thickness: 3/16"
- Board Size: 30" x 42"
- Board Color: White
- Quantity: 25 Per Box
Part #: 550447AE -
Logan Simplex Elite 40" Mat Cutter from Graphics (750-1)
- 40" (101cm) capacity
- Multi-material mat cutting system with parallel mat guide in aluminum channels
- Hinged guide rail, pull style bevel cutting head and #701-1 Straight Cutter
- 32" (81cm) scaled squaring arm with stop for downsizing
- Two guide rail production stops
Part #: 750-1 -
Black 3/16" Gator Mounting Board 36" x 48" with Repositional Adhesive - 5pk (550460G-R)
- Board Type: Gator Board with Self-Stick Repositionable adhesive
- Board Thickness: 3/16"
- Board Size: 36" x 48"
- Board Color: Black
- Quantity: 5 Per Box
Part #: 550460G-R
